web analytics
  • The Platinum Tools EZ-RJ45 cat6 crimp connectors are a great easy way to make your crimps are tight and accurate. The individual wires go all the way through this connector head and allow you to make sure everything is lined up before you crimp down. Specifically made to work with crimp tool [part]100054C[/part] or the EXO crimp tool frame with the EZ-RJ45 die part number [part]100072C[/part]. Details
    • Max Cable Outer Diameter: 0.275” (6.98mm)
    • Max Insulation Diameter (Conductors): 0.040” (1.016mm)
    • Meets ANSI/EIA/TIA/TAA specifications
    • Solid or Stranded, 24 – 23 AWG
    • UL Listed and RoHS/FCC compliant
    • 50 micron gold plated contacts
    • Color: Clear/Transparent
    • Made in USA
    Part No. 100009C
  • The EZ-RJ45 fully shielded plug, with an internal ground, combines the performance advantage exclusive to the EZ-RJ45 design with the performance advantage inherent to shielded products. EZ-RJ45 design allows the wires to pass through the connector so the twists in each pair can be pulled closer to the contacts than conventional plugs.
    Part No. 100021C
  • The Original EZ-RJ45 shielded CAT5/6 connector simplifies twisted pair terminations by allowing the wires to be inserted through the connector and out the front for EZ verification of wiring sequence. Applications with RF problems or grounding requirements usually specify to use shielded cable and shielded connectors.
    Part No. 100023C
  • The Platinum Tools EZ-RJ45 is a great easy way to make your crimps tight and accurate. The individual wires go all the way through this connector head and allow you to make sure everything is lined up before you crimp down. Specifically made to work with crimp tool 92D5-66800 or the EXO crimp tool frame with the EZ-RJ45 die part number [part]100072C[/part].
    Part No. 100003C
  • The Platinum Tools EZ-RJ45 cat5e crimp connectors are a great easy way to make your crimps tight and accurate. The individual wires go all the way through this connector head and allow you to make sure everything is lined up before you crimp down. Specifically made to work with crimp tool [part]100054C[/part] or the EXO crimp tool frame with the EZ-RJ45 die part number [part]100072C[/part].
    Part No. 100010C
  • These EZ-RJ45 shielded Cat6 crimp plugs will help you crimp your own Cat6 cable with ease. They feature an internal ground for a seamless result. These only work with EZ crimp tools like Part #100054C and #100004C. These plugs come in a bag of 100 pieces. Some shielded Cat6 cables may have an outside diameter large enough to require cutting off the shielding and grounding with the drain wire. In such cases mind the position of the leaf springs on the back side of the connector with respect to the positioning of the drain wire. Details
    • EZ-RJ45® design allows the wires to pass through the connector so the twists in each pair can be pulled closer to the contacts than conventional plugs.
    • Maintaining the twists to the point of termination significantly decreases crosstalk and markedly increases performance.
    • Fully shielded products provide reduced pair-to-pair crosstalk, alien crosstalk, and considerably improved immunity to noise at all frequencies.
    • Substantially improve noise immunity at all frequencies, especially above 30 MHz when cable balance starts to significantly degrade.
    • Category 6 performance per EIA/TIA B.2. FCC compliant, UL rated. RoHS compliant
    • Max Cable OD: 6.60mm (0.260"), Max Insulated wire OD: 1.016mm (0.040")
    • For solid round or stranded wire cables.
    • Made in the USA
    • TAA Compliant
    Part No. 105020
  • These EZ-RJ45 shielded Cat6 crimp plugs will help you crimp your own Cat6 cable with ease. They include an external ground for applications where copper tape or soldering is not desired and/or possible. These only work with EZ crimp tools like Part #100054C and #100004C. These plugs come in a bag of 100 pieces. Details
    • For use with CAT5e/6+ shielded cable
    • For solid round or stranded wire cables.
    • Max Cable OD: 7.11mm (0.280")
    • Max Insulated wire OD: 1.016mm (0.040")
    • UL Rated, FCC compliant
    • TAA Compliant
    Part No. 105022
  • The Platinum Tools EZ-RJ45 cat6 crimp connectors are a great easy way to make your crimps are tight and accurate. The individual wires go all the way through this connector head and allow you to make sure everything is lined up before you crimp down. Specifically made to work with crimp tool [part]100054C[/part] or the EXO crimp tool frame with the EZ-RJ45 die part number [part]100072C[/part]. Details
    • Max Cable Outer Diameter: 0.275” (6.98mm)
    • Max Insulation Diameter (Conductors): 0.040” (1.016mm)
    • Meets ANSI/EIA/TIA/TAA specifications
    • Solid or Stranded, 24 – 23 AWG
    • UL Listed and RoHS/FCC compliant
    • 50 micron gold plated contacts
    • Color: Clear/Transparent
    • Made in USA
    Part No. 105004
Go to Top