Part No. 10W1-04201-16
-
This is a 1 foot standard power extension cable. This power cable features the NEMA 5/15P (standard three prong power plug) to a NEMA 5/15R (female) power cord. Use this cord to extend an existing outlet or cable. The jacket is durable and long lasting but flexible enough to wrap in tight spaces. The 16AWG pure copper conductor transfers maximum power. This cable operates on 125 volts and 13 Amps power. Operating temperature is 75C/167F. -
This is a 3 foot standard power extension cable. This power cable features the NEMA 5/15P (standard three prong power plug) to a NEMA 5/15R (female) power cord. Use this cord to extend an existing outlet or cable. The jacket is durable and long lasting but flexible enough to wrap in tight spaces. The 16AWG pure copper conductor transfers maximum power. This cable operates on 125 volts and 13 Amps power. Operating temperature is 75C/167F.Part No. 10W1-04203-16 -
This is a 3 foot heavy duty 16 AWG (American Wire Gauge) computer/monitor power cord. This power cord fits most computers, monitors, printers and various other devices. The cables ends are NEMA 5-15P (Wall Socket) and C13 (Computer/Monitor). It is rated for up to 13 AMPs. If you need a replacement computer or monitor power cord, this is likely the cable you need. These cables do carry other uses, such as larger laser printers and more industrial equipment such as embroidery machines. Please consult your manual to verify the C13 connector, your equipment would have a C14 socket.Part No. 10W1-01203-16 -
Power two electronic devices with this 13 Amp-rated power Y-cable. Split one C14 plug into two C13 receptacles. This 14 inch cable is an ideal solution for reducing clutter in a data center.The 16 awg conductors are rated to 13 Amps. The cable features an SJT jacket and is UL listed.Part No. 10W1-02301Y -
Power Extension Cord, Black, Low Profile Right Angle NEMA 5-15P to NEMA 5-15R, 13 Amp, 16 AWG, 1 foot -
This is a 6 foot heavy duty 16 AWG (American Wire Gauge) computer/monitor power cord. This power cord fits most computers, monitors, printers and various other devices. The cables ends are NEMA 5-15P (Wall Socket) and C13 (Computer/Monitor). It is rated for up to 13 AMPs. If you need a replacement computer or monitor power cord, this is likely the cable you need. These cables do carry other uses, such as larger laser printers and more industrial equipment such as embroidery machines. Please consult your manual to verify the C13 connector, your equipment would have a C14 socket.Part No. 10W1-01206-16 -
Extend and multiply your power needs with this indoor rated polarized power cord. This 6ft extension will give you extra length to reach those further distances and split power to 3 devices.Part No. 10W1-39106 -
Power Y Cord, Black, NEMA 5-15P to Dual NEMA 5-15R, 16AWG, 13 Amp, 2 foot -
Power two electronic devices with this 13 Amp-rated power Y-cable. Split one C14 plug into two C13 receptacles. This 36 inch(3 foot) cable is an ideal solution for reducing clutter in a data center.The 16 awg conductors are rated to 13 Amps. The cable features an SJT jacket and is UL listed.Part No. 10W1-02303Y
-
This is a 6 foot standard power extension cable. This power cable features the NEMA 5/15P (standard three prong power plug) to a NEMA 5/15R (female) power cord. Use this cord to extend an existing outlet or cable. The jacket is durable and long lasting but flexible enough to wrap in tight spaces. The 16AWG pure copper conductor transfers maximum power. This cable operates on 125 volts and 13 Amps power. Operating temperature is 75C/167F.Part No. 10W1-04206-16 -
Power Extension Cord, Black, Low Profile Right Angle NEMA 5-15P to NEMA 5-15R, 13 Amp, 16 AWG, 2 foot
-
Extend and multiply your power needs with this indoor-rated, polarized power cord. This 9ft extension will give you extra length to reach those further distances and split power to 3 devices. 125V, 13A, 1625W, UL and CSA CertifiedPart No. 10W1-39109 -
Power Y Cord, Black, NEMA 5-15P to Dual NEMA 5-15R, 16AWG, 13 Amp, 3 foot
-
Power Extension Cord, Black, Low Profile Right Angle NEMA 5-15P to NEMA 5-15R, 13 Amp, 16 AWG, 3 foot
-
This is a 3 foot standard 3-pin power cord has the ability to power two different devices with the same cord, eliminating excess clutter and using one less power outlet. This power cord will fit most computers, monitors, printers, and various other devices. This cable is UL listed and has a 13 Amp rating.Part No. 10W1-01203-16Y -
Extend and multiply your power needs with this indoor-rated, non-polarized power cord. This 12ft extension will give you extra length to reach those further distances and split power to 3 devices. Comes in white.Part No. 10W1-39112 -
This is a 10ft heavy duty 16 AWG (American Wire Gauge) computer/monitor power cord, also works for certain larger printers. This power cord fits most computers, monitors, printers and various other devices. The cables ends are NEMA 5-15P (Wall Socket) and C13 (Computer/Monitor). It is rated for up to 13 AMPs. If you need a replacement computer or monitor power cord, this is likely the cable you need. These cables do carry other uses, such as larger laser printers and more industrial equipment such as embroidery machines. Please consult your manual to verify the C13 connector, your equipment would have a C14 socket.Part No. 10W1-01210-16 -
Our Hospital Grade 6 foot Green-Dot NEMA 5-15P power cord is rated for use in hospitals and other medical settings. Featuring clear connectors, you can be sure this durable power cord will hold up to the demanding needs of hospital application. This cord has three 16 AWG conductors, is rated to 13 Amps at 125 Volts and is RoHS compliant.Part No. 10W2-51306 -
Power two electronic devices with this 13 Amp-rated power Y-cable. Split one C14 plug into two C13 receptacles. This 6 foot) cable is an ideal solution for reducing clutter in a data center.The 16 awg conductors are rated to 13 Amps. The cable features an SJT jacket and is UL listed.Part No. 10W1-02306Y
-
This is a 10 foot standard power extension cable. This power cable features the NEMA 5/15P (standard three prong power plug) to a NEMA 5/15R (female) power cord. Use this cord to extend an existing outlet or cable. The jacket is durable and long lasting but flexible enough to wrap in tight spaces. The 16AWG pure copper conductor transfers maximum power. This cable operates on 125 volts and 13 Amps power. Operating temperature is 75C/167F.Part No. 10W1-04210-16 -
Power Y Cord, Black, NEMA 5-15P to Dual NEMA 5-15R, 16AWG, 13 Amp, 6 foot
-
Power Extension Cord, Black, Low Profile Right Angle NEMA 5-15P to NEMA 5-15R, 13 Amp, 16 AWG, 6 foot
-
This is a 6 foot standard 3-pin power cord has the ability to power two different devices with the same cord, eliminating excess clutter and using one less power outlet. This power cord will fit most computers, monitors, printers, and various other devices. This cable features a thicker, 16 awg wire that is capable of 13 amps. This cable is UL listedPart No. 10W1-01206-16Y
-
Hospital Grade, Green Dot, Power Cord, Nema 5-15 to C13, 16 AWG, SJT, 13 Amp / 125 Volt, Black, 10 Foot -
Our Hospital Grade 10 foot Green-Dot NEMA 5-15P power cord is rated for use in hospitals and other medical settings. Featuring clear connectors, you can be sure this durable power cord will hold up to the demanding needs of hospital application. This cord has three 16 AWG conductors, is rated to 13 Amps at 125 Volts and is RoHS certified.Part No. 10W2-51310 -
This is a standard power extension cable. This power cable features the NEMA 5/15P (standard three prong power plug) to a NEMA 5/15R (female) power cord. Use this cord to extend an existing outlet or cable. The jacket is durable and long lasting but flexible enough to wrap in tight spaces. The 16AWG pure copper conductor transfers maximum power. This cable operates on 125 volts and 13 Amps power. Operating temperature is 75C/167F.Part No. 10W1-04215-16 -
This white 16 AWG (American Wire Gauge) 2 conductor Speaker cable is CM rated for in-wall use, though it need not be used strictly in-wall. It comes in a convenient 50 foot spool and is ideal for wiring the speakers in your home theater or house to your receiver. Each conductor (wire) is composed of 65 0.16 mm strands made from pure copper which provides the optimal conductivity/low resistance to drive high quality audio to your speakers. Our speaker wire is made from pure copper. Some companies use the marketing term oxygen free copper which really means there is no iron oxide in the wire. When oxides of iron are in the copper, the conductivity of the wire reduces due to the higher resistance of the iron oxide. So it is in your best interest to install speaker wire made with pure copper like ours are. Another misnomer is that copper clad aluminum is the same quality as pure copper; this is false. The resistance (Ohms) between the two differ and as resistance in the cable increases the power delivered to the speaker is reduced. The sound will be lower and can lose some of its quality. If copper's conductivity, due to resistance, is rated at 100% then aluminum's conductivity would be rated at 61%. In order to deliver the same quality of sound with aluminum one would need a much larger gauge.Part No. 10G2-29150 -
This is a 10 foot standard 3-pin power cord has the ability to power two different devices with the same cord, eliminating excess clutter and using one less power outlet. This power cord will fit most computers, monitors, printers, and various other devices. This cable features a thicker, 16 awg wire that is capable of 13 amps. This cable is UL listedPart No. 10W1-01210-16Y
-
This is a 25 foot standard power extension cable. This power cable features the NEMA 5/15P (standard three prong power plug) to a NEMA 5/15R (female) power cord. Use this cord to extend an existing outlet or cable. The jacket is durable and long lasting but flexible enough to wrap in tight spaces. The 16AWG pure copper conductor transfers maximum power. This cable operates on 125 volts and 13 Amps power. Operating temperature is 75C/167F.Part No. 10W1-04225-16 -
This white 16 AWG (American Wire Gauge) 2 conductor Speaker cable is CM rated for in-wall use, though it need not be used strictly in-wall. It comes in a convenient 100 foot spool and is ideal for wiring the speakers in your home theater or house to your receiver. Each conductor (wire) is composed of 65 0.16 mm strands made from pure copper which provides the optimal conductivity/low resistance to drive high quality audio to your speakers. Our speaker wire is made from pure copper. Some companies use the marketing term oxygen free copper which really means there is no iron oxide in the wire. When oxides of iron are in the copper, the conductivity of the wire reduces due to the higher resistance of the iron oxide. So it is in your best interest to install speaker wire made with pure copper like ours are. Another misnomer is that copper clad aluminum is the same quality as pure copper; this is false. The resistance (Ohms) between the two differ and as resistance in the cable increases the power delivered to the speaker is reduced. The sound will be lower and can lose some of its quality. If copper's conductivity, due to resistance, is rated at 100% then aluminum's conductivity would be rated at 61%. In order to deliver the same quality of sound with aluminum one would need a much larger gauge.Part No. 10G2-291HD -
Outdoor/Direct Burial Speaker Cable, Black, Pure Copper, CMR/CL3R, 16/2 (16 AWG 2 Conductor), 65 Strand / 0.16mm, Pullbox, 500 footPart No. 10G2-712SF -
This white 16 AWG (American Wire Gauge) 2 conductor Speaker cable is CM rated for in-wall use, though it need not be used strictly in-wall. It comes in a 500 foot pull box and is ideal for wiring the speakers in your home theater or house to your receiver. Each conductor (wire) is composed of 65 0.16 mm strands made from pure copper which provides the optimal conductivity/low resistance to drive high quality audio to your speakers. Our speaker wire is made from pure copper. Some companies use the marketing term oxygen free copper which really means there is no iron oxide in the wire. When oxides of iron are in the copper, the conductivity of the wire reduces due to the higher resistance of the iron oxide. So it is in your best interest to install speaker wire made with pure copper like ours are. Another misnomer is that copper clad aluminum is the same quality as pure copper; this is false. The resistance (Ohms) between the two differ and as resistance in the cable increases the power delivered to the speaker is reduced. The sound will be lower and can lose some of its quality. If copper's conductivity, due to resistance, is rated at 100% then aluminum's conductivity would be rated at 61%. In order to deliver the same quality of sound with aluminum one would need a much larger gauge.Part No. 10G2-291SF -
This white 16 AWG (American Wire Gauge) 4 conductor Speaker cable is CM rated for in-wall use, though it need not be used strictly in-wall. It comes in a 500 foot pull box and is ideal for wiring the speakers in your home theater or house to your receiver. Each conductor (wire) is composed of 65 0.16 mm strands made from pure copper which provides the optimal conductivity/low resistance to drive high quality audio to your speakers. Our speaker wire is made from pure copper. Some companies use the marketing term oxygen free copper which really means there is no iron oxide in the wire. When oxides of iron are in the copper, the conductivity of the wire reduces due to the higher resistance of the iron oxide. So it is in your best interest to install speaker wire made with pure copper like ours are. Another misnomer is that copper clad aluminum is the same quality as pure copper; this is false. The resistance (Ohms) between the two differ and as resistance in the cable increases the power delivered to the speaker is reduced. The sound will be lower and can lose some of its quality. If copper's conductivity, due to resistance, is rated at 100% then aluminum's conductivity would be rated at 61%. In order to deliver the same quality of sound with aluminum one would need a much larger gauge.Part No. 10G2-491SF -
This black 16 AWG (American Wire Gauge) 4 conductor Speaker cable is rated for outdoor use and/or direct burial. It comes in a 500 foot pull box and is ideal for running to exterior speakers in your backyard or outside the office. Each conductor (wire) is composed of 65 0.16mm strands made from pure copper which provides the optimal conductivity/low resistance to drive high quality audio to your speakers. Our speaker wire is made from pure copper. Some companies use the marketing term oxygen free copper which really means there is no iron oxide in the wire. When oxides of iron are in the copper, the conductivity of the wire reduces due to the higher resistance of the iron oxide. So it is in your best interest to install speaker wire made with pure copper like ours are. Another misnomer is that copper clad aluminum is the same quality as pure copper; this is false. The resistance (Ohms) between the two differ and as resistance in the cable increases the power delivered to the speaker is reduced. The sound will be lower and can lose some of its quality. If copper's conductivity, due to resistance, is rated at 100% then aluminum's conductivity would be rated at 61%. In order to deliver the same quality of sound with aluminum one would need a much larger gauge.Part No. 10G2-722SF -
Fire Alarm / Security Cable, Red, 16/2 (16 AWG 2 Conductor), Solid, FPLR, Spool, 1000 foot -
Security/Alarm Wire, Gray, 16/2 (16AWG 2-Conductor), Stranded, CM / Inwall rated, Pullbox, 1000 foot -
Fire Alarm / Security Cable, Red, 16/2 (16 AWG 2 Conductor), Solid, FPLR, Pullbox, 1000 foot
-
Security/Alarm Wire, Gray, 16/4 (16AWG 4-Conductor), Stranded, CM / Inwall rated, Pullbox, 1000 foot -
Fire Alarm / Security Cable, Red, 16/4 (16 AWG 4 Conductor), Solid, FPLR, Spool, 1000 foot
