View Products
-
10/100/1000BASE-T to 1000BASE-SX Multi-Mode Fiber Converter SC
$215.95 71F1-201SC10/100/1000BASE-T to 1000BASE-SX Multi-Mode Fiber Converter (SC) Gigabit. The 72X6-02104 media converter is able to convert network signals between UTP and fiber optic cable based networks. This allows extension of networks over a longer distance in multi-mode via fiber-optic cabling. This Media Converter provides a 10/100/1000BaseT auto-negotiating RJ-45 connector port that supports full duplex and half duplex switch connectivity and MDI/MDI-X Auto Crossover. The Smart Link Fault Pass-through technology (Link Lost Forwarding) enables the switch to shut down data transmission when the link connection has failed.Part No. 71F1-201SC -
10-32 Rackmount Cage Nuts 100 Piece
$73.95 30D1-043HDThese 10-32 cage nuts are used to install rackmount equipment into server rack cabinets, 4-post racks, wall-mount cabinets and racks, and 2-post racks. Cage nut style rails are often referred to as universal mounting rails, which are the most common type of rails used today. If a rack or cabinet has cage nut style rails or universal mounting rails, they will require cage nuts. The thread size of the cage nut and the thread size of the screw must be the same to properly install rack-mount components.Part No. 30D1-043HD -
10-32 Rackmount Cage Nuts 50 Piece
$54.95 30D1-04350These 10-32 Cage Nuts are used to install rackmount equipment into server rack cabinets, 4-post racks, wallmount cabinets and racks, and 2-post racks. Cage nut style rails are often referred to as universal mounting rails, which are the most common type of rails used today. If a rack or cabinet has cage nut style rails or universal mounting rails, they will require cage nuts. The thread size of the cage nut and the thread size of the screw must be the same to properly install rackmount components.Part No. 30D1-04350 -
10-32 Rackmount Screws 100 Piece
$39.95 30D1-041HDThese 10-32 rack screws have a pilot point that helps to prevent cross threading and guide the screw when being installed. They are cold forged and have a black oxide with wax finish. These truss head screws are .75 inches long and install with any Phillips screw driver.Part No. 30D1-041HD -
10-32 Rackmount Screws 50 Piece
$28.95 30D1-04150These 10-32 Rack Screws have a pilot point that helps prevent cross threading and guide the screw when being installed. They are cold forged and have a black oxide with wax finsh. These truss head screws are .75 inches long and install with any Phillips screw driver or bit.Part No. 30D1-04150 -
10-32 Rackmount Screws with Washers 100 Piece
$45.95 30D1-042HDThese 10-32 Rack Screws come in a small tin with 100 pieces and have a pilot point that helps prevent cross threading and guide the screw when being installed. They are cold forged and have a black oxide with wax finish. These truss head screws are .75 inches long and install with any Phillips screw driver or bit.Part No. 30D1-042HD -
10-32 Rackmount Screws with Washers 50 Piece
$30.95 30D1-04250These 10-32 Rack Screws have a pilot point that helps prevent cross threading and guide the screw when being installed. They are cold forged and have a black oxide with wax finish. These truss head screws are .75 inches long and install with any Phillips screw driver or bit.Part No. 30D1-04250 -
10 foot Cat6 Gray Ethernet Crossover Cable
$7.95 10X8-33110This Cat6 10 foot gray crossover cable is used for networking, data transfer and phone lines. For use from a DSL/cable modem directly to the PC and for a direct link from PC to PC. Cat6 cables are used for networking, data transfer, and phone lines. Cat6 Cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a gray UTP (Unshielded Twisted Pair) crossover cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat6 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat6 Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X8-33110 -
10 foot Cat6 Red Ethernet Patch Cable Bootless
$4.95 10X8-17110Cat6 Ethernet cables of the 10 foot length have a variety of uses. These cables will suffice for connecting routers/switches to Cable/DSL modems, computers to routers/switches or even in the server/network room for connecting ports on patch panels. These Ethernet Cables are great for the home office or any other environment. Cat6 cables are used for networking, data transfer, and phone lines. Cat6 Cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a red UTP (Unshielded Twisted Pair) bootless patch cable. Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat6 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat6 Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X8-17110 -
10 foot HDMI Extension Cable High Speed with Ethernet
$22.95 10V3-41210This 10 foot HDMI extension cable with high-speed Ethernet works perfectly to extend out a too-short cable. This really comes in handy if your existing cable comes up a few feet short. This extender's connectors are HDMI male to HDMI female.Part No. 10V3-41210 -
10 ft. Apple/Mac Monitor Cables – DB15 Male to Male
$7.95 10D2-01110This 10 foot DB15 Male to DB15 Male Apple/Mac monitor cable is designed for use only with Mac computers. Featuring molded boots, 15 conductors and shielding, this well constructed Mac specific monitor cable will deliver a clear and crisp signal. The connector is a row of 7 pins and a row of 8 pins and should not be confused with an SVGA/VGA end.Part No. 10D2-01110 -
10 ft DIN5 Male / DIN5 Female 5C Straight
$6.95 10I5-02210This is an extension cable used to extend the older-style large 5 pin keyboard cable. Color is beige.Part No. 10I5-02210 -
10 Gb Aqua LC/SC Multimode Duplex Fiber Optic Cable 50/125 7 meter
$13.95 LCSC-31007This Aqua Blue jacketed 7 meter (~23 feet) 10 gigabit rated fiber optic cable is terminated with a LC (Lucent Connector) connector on one end and a SC (Subscriber Connector) connector on the other end. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCSC-31007 -
10 Gb Aqua LC/ST Multimode Duplex Fiber Optic Cable 50/125 1 meter
$8.95 LCST-31001This Aqua Blue jacketed 1 meter (~3 feet) 10 gigabit rated fiber optic cable is terminated with a LC (Lucent Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) connector on the other end. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCST-31001 -
10 Gb Aqua LC/ST Multimode Duplex Fiber Optic Cable 50/125 5 meter
$15.95 LCST-31005This Aqua Blue jacketed 5 meter (~16 feet) 10 gigabit rated fiber optic cable is terminated with a LC (Lucent Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) connector on the other end. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCST-31005 -
10-Gbit Cat6a Shielded Solid Ethernet Cable Yellow Spool
$591.95 13X6-581NHOur yellow bulk 1000 foot solid Cat6a Shielded Ethernet cable comes in a convenient spool and is ideal for the person looking to make longer permanent network runs during installation/expansion of network infrastructure. Cat6a was developed to achieve maximum distance of 100 meters for full 10-Gigabit network speeds. This robust spec will afford you the extra headroom across your network that Cat6 can not. The 500 Mhz performance is double that of Category 6 and five times the bandwidth capacity of Category 5e. The extra performance is ideal for Power over Ethernet (PoE) and Voice Over Internet Protocol (VoIP) applications where data loss is audibly and visually seen and heard. The latest draft declares a new measurement for Power-Sum Alien Crosstalk to ensure neighboring pairs do not cause disturbance to the other cables. The cable center isolator maintains strict pair separation optimizing NEXT performance. Our Cat6a bulk cable tested for compliance with all EIA/TIA-568-C Category 6a specifications. This particular cable is a yellow shielded solid cable. Cat6a cable includes a spline and ribbing to help ensure separation between the pairs which limits cross talk. The individual conductors are 23 AWG (American wire gauge) solid pure copper. Pure copper conductors provide the best signal possible. This bulk CAT6a cable will not be able to be crimped onto any connectors. The wires are simply too thick to fit. This cable should be punched down into a CAT6a keystone jack on one end and patch panel on the other end.Part No. 13X6-581NH -
10 meter 10 Gb Aqua LC/SC Multimode Duplex Fiber Optic Cable 50/125
$21.95 LCSC-31010This Aqua Blue jacketed 10 meter (~33 feet) 10 gigabit rated fiber optic cable is terminated with a LC (Lucent Connector) connector on one end and a SC (Subscriber Connector) connector on the other end. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCSC-31010 -
10 Meter 10 Gigabit Aqua OM4 Fiber Optic Cable LC / LC, Multimode
$22.95 LCLC-41010This 10 meter (33 feet) aqua 10 gigabit rated fiber optic cable is terminated with LC (Lucent Connector) connectors on both ends. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns.Part No. LCLC-41010 -
10 meter 10Gb Aqua LC/ST OM3 Duplex FiberOptic Cable, 50/125
$21.95 LCST-31010LC/UPC to ST/UPC OM3 Duplex 2.0mm Fiber Optic Patch Cord, OFNR, Multimode 50/125, Aqua Jacket, Beige LC Connector, Red/Black Boot ST, 10 meter (33 ft) -
10 meter 12 strand Plenum Fiber Optic Cable MTP(MPO) 50/125, 40Gb
$100.95 MPMP-31010This 10 meter (33 foot) high-quality Plenum approved fiber optic cable is 40/100 gigabit rated MTP / MTP (MPO). It features 12 fiber strands with an Aqua Blue colored jacket. Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Local building codes may require all cables run inside the walls or ceiling be Plenum rated. Multimode cables can come with many different fiber optic connector types and a couple different core sizes. This particular 40/100 gigabit Multimode fiber optic cable offers MTP connectors, is and has a 50/125 micron core. MTP is a perfect solution cable. It can bridge over older legacy 1G/10G networks to the 40G/100G networks. By using a MTP to LC breakout cable you can connect 12LC connections to single MTP device. You can also use the 12 strand MTP cable to use as a trunk line on the backbone of your network. As you can run a single cable to connect 12 devices the higher density is is perfect to condense the amount of cables you need to run, also saving on installation labor.Part No. MPMP-31010 -
10 meter 24 strand Plenum Fiber Optic Cable MTP(MPO) 50/125, 100Gb
$243.95 MPMP-32010This 10 meter (33 foot) high-quality Plenum MTP / MTP (MPO) fiber optic cable supports 100 gigabit transmissions over 24 Strands with an Aqua Blue colored jacket. Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Local building codes may require all cables run inside the walls or ceiling be Plenum rated. Multimode cables can come with many different fiber optic connector types and a couple different core sizes. This particular 100 gigabit Multimode fiber optic cable offers MTP connectors, is and has a 50/125 micron core.Part No. MPMP-32010 -
10 meter DVI-D Dual Link Video Cable, Ferrite
$85.95 10V2-05310BK-FOur 10 meter (33 foot) black DVI-D Dual Link cable has DVI-D male ends with thumb screws. This DVI cable features foil and braid shielding, ferrites and 24 AWG (American Wire Gauge) conductors for a high quality video signal for your display(s). This DVI-D cable is used to connect your computer to your high resolution monitor. Dual link DVI cables support high definition resolutions of up to 2560 x 1600. DVI has superseded the analog signal carrying VGA type cables for some manufacturers. While its video resolutions are similar to HDMI, it should be noted that DVI cables carry a video signal only unlike the former which also supports surround sound audio. Please note: The maximum recommended length of this DVI cable for 2560 x 1600 resolution displays is 15 meters, longer lengths will require an amplifier: Part # 41H1-144DV.Part No. 10V2-05310BK-F -
10 meter LC/LC Multimode Duplex Fiber Optic Cable 50/125
$17.95 LCLC-11010This 10 meter (~33 feet) fiber optic cable is terminated with LC (Lucent Connector) connectors on both ends. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCLC-11010 -
10 meter LC/LC Multimode Duplex Fiber Optic Cable 62.5/125
$12.95 LCLC-11110This 10 meter (~33 feet) fiber optic cable is terminated with LC (Lucent Connector) connectors on both ends. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCLC-11110
Our Featured Products
Select options
This product has multiple variants. The options may be chosen on the product page
Details
