Black NEMA 5-20P TO NEMA 5-15R, 12/3, 20 Amp, UL Listed, SJT, 6 foot

Our yellow bulk 1000 foot solid Cat6a Shielded Ethernet cable comes in a convenient spool and is ideal for the person looking to make longer permanent network runs during installation/expansion of network infrastructure. Cat6a was developed to achieve maximum distance of 100 meters for full 10-Gigabit network speeds. This robust spec will afford you the extra headroom across your network that Cat6 can not. The 500 Mhz performance is double that of Category 6 and five times the bandwidth capacity of Category 5e. The extra performance is ideal for Power over Ethernet (PoE) and Voice Over Internet Protocol (VoIP) applications where data loss is audibly and visually seen and heard. The latest draft declares a new measurement for Power-Sum Alien Crosstalk to ensure neighboring pairs do not cause disturbance to the other cables. The cable center isolator maintains strict pair separation optimizing NEXT performance. Our Cat6a bulk cable tested for compliance with all EIA/TIA-568-C Category 6a specifications. This particular cable is a yellow shielded solid cable. Cat6a cable includes a spline and ribbing to help ensure separation between the pairs which limits cross talk. The individual conductors are 23 AWG (American wire gauge) solid pure copper. Pure copper conductors provide the best signal possible. This bulk CAT6a cable will not be able to be crimped onto any connectors. The wires are simply too thick to fit. This cable should be punched down into a CAT6a keystone jack on one end and patch panel on the other end.

This 6 foot high quality serial cable features a HD60 male connector on one end and a DB15 male connector on the other end. It is compatible with Cisco part number CAB-X21MT-6. The DB60 is the Cisco end and the DB15 end is the network end. It is commonly used with the Cisco 7000 family, Cisco 4000 series, Cisco 3600 series, Cisco 2500 series, Cisco 1600 series, Cisco access servers, and AccessPro PC cards.

This adapter will take an RCA video cable and convert it to a RF type. This device works with whatever connector configuration you choose.

This 25 Meter 10 Gigabit Aqua OM4 Fiber Optic cable has multimode LC/LC connectors on both ends. Fiber cables have become popular in recent years for a number of reasons, which include their resistance to RF (radio frequency) interference, and their ability to transmit data at longer lengths without the risk of data loss.

Cat5e Ethernet cables of the 20 foot length have a variety of uses. These cables will provide a greater reach for those situations that require more serious distances. These Ethernet Cables are great for the home office or any other environment. This particular cable is a gray UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.

24 Fiber Indoor/Outdoor Fiber Optic Cable, Multimode 62.5/125, OM1,Plenum Rated, Black, Spool, 1000ft

Cat6 Ethernet cables of the 1 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. Cat6 cables are used for networking, data transfer, and phone lines. Cat6 Cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a white UTP (Unshielded Twisted Pair) bootless patch cable. Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat6 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat6 Ethernet patch cables exceed the EIA/TIA-568-C standard.

Our 6ft HDMI to DVI-D single link cable will connect to a DVI-D or DVI-I digital flat panel and home theater devices such as DVD players, set-top boxes, projectors, switches and splitters with HDMI to DVI or vice versa. This premium high performance cable supports HDCP, high-bandwidth, uncompressed video, and has double shielding and 24k Gold connectors which prevents signal loss and screen ghosting for maximum video performance. This cable is compatible with all HDTV resolutions up to 1080p and is UL listed. In wall rated CL2. NOTE: HDMI-DVI cables are a VIDEO ONLY solution. The audio signal is not transmitted.

These RG11 F-Pin Compression Connectors are perfect for creating a seamless, air-tight connection when terminating your satellite or cable TV cables. This bag of compression connectors will get your termination done quickly and reliably the first time. Qty 25/bag.

• Supports a maximum weight of 20kg
• Left, right, tilt and rotary 360° adjustment
• Arm extends to 148mm
• Torque control for each adjustment setting to control or prevent movement
• Supplied with wall fixing bolts, display mounting screws and spanner
• Conforms to the VESA mounting standards of 75 x 75mm and 100 x 100mm
• Colour: silver

3-Gang Recessed Low Voltage Cable Plate, Black