This 3-foot Category 8.1 cable, Class I channel, features an orange PVC jacket, braided outer shield, with four individually mylar foil shielded 24 AWG pure copper pairs as defined in ISO/IEC 11801 and ratified in ANSI/TIA 568-C.2-1. Cat8 cabling was designed primarily for high-speed data centers where switches, servers, and other network hardware are located in close proximity. This newest copper communications cable offers greater flexibility both literally and in distances when compared to QSFP+ and Twinax DAC assemblies which typically cost significantly more and are often much more limited in scope. It has the reach to cover Top-of-Rack and End-of-Row or Middle-of-Row network topologies while delivering 10, 25, and 40 Gigabit data rates over BASE-T technology with RJ45 ends making it a drop-in replacement for Cat6a where rates beyond 10Gb will be needed today or in the future. Cat8 has stricter specifications for noise restriction and crosstalk than any of its predecessors. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat8 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. Each pair of conductors is shielded with an aluminum mylar foil to reduce, if not eliminate, crosstalk. These cables also have a braided shield, which protects from outside electromagnetic interference.

LC/UPC to LC/APC OS2 Duplex 2.0mm Fiber Optic Patch Cord, OFNR, Singlemode 9/125, Yellow Jacket, Blue LC + Green LC Connector, 3 meter (10 ft)

Warrior Wrap 7mil General Vinyl Electrical Tape Black 0.75 inch x 60 ft

2 Fiber Indoor Distribution Fiber Optic Cable, Multimode, 50/125, OM4, 10 Gbit, Aqua, Riser Rated, Spool, 1000 foot

• USB 2.0/OTG Type Micro-B Male to USB 2.0 Type Mini-B Male

• Micro-B is OTG Host connector

• Black cable
• Fully shielded cable with moulded connectors
• 10 year warranty

“

• 6 Pin Mini DIN Male to 6 Pin Mini DIN Female
• Fully moulded
• 10 year warranty

“

USB 2.0 High Speed Active Extension Cable, USB Type A Male to Type A Female, 50 foot

Computer / Monitor Power Cord, Green, NEMA 5-15P to C13, 18AWG, 10 Amp, 1 foot

This 2 meter (~6 feet) fiber optic cable is terminated with a LC (Lucent Connector) connector on one end and a SC (Subscriber Connector) connector on the other end. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)

This dual gang Keystone wall plate features spaces for up to 12 keystones. You can mix and match keystones to create any combination of connections at the point of entry in a clean professional manner. Common usage may include networking, home theater, audio/video systems, projectors and general work areas. The wall plate does the job of allowing for easy interchange of connections and aesthetics.

Our 15 foot high quality RS-232 serial cable features molded connectors and gold plated contacts for superior corrosion resistance ensuring a solid connection for the life of the cable. The connectors are DB25 male supporting 25 conductors in a 1:1 configuration. This cable is ideal for connecting 25 pin serial devices to laptops, computers and expansion/interface cards that have a 25 pin serial port. This male to male serial cable is solidly constructed, UL rated and RoHS Compliant.

• 2 x SC fiber Optic Male to 2 x SC fiber Optic Male

• Compatible with all standard fiber optic equipment and connectors
• Full duplex 50/125µm multimode fiber
• Zip twin 2.8mm
• Low Smoke Zero Halogen cable
• Ceramic connectors ensure low signal loss and high reliability
• Total immunity to electrical and electromagnetic interference (EMI)
• Insertion loss: 0.5db (max)
• Includes insertion loss test report
• Color: Orange
• 10 year warranty

Black NEMA 6-20P TO IEC-60320-C19, 12/3, 20 Amp, UL Listed, SJT, 10 foot

Warrior Wrap 7mil General Vinyl Electrical Tape Pink 0.75 inch x 60 ft

This white decora brush style cable pass-through makes an excellent wall exit/entry for routing cables when one does not want or can not use coupler type Decora inserts. The brush closure allows for a fairly large cable end to be passed through into a wall or other contained space in an attractive manner, helping keep installations clean and professional.

Our 10 foot Cat3 telco trunk cable features two 90 degree Amphenol connectors and 25 twisted pairs. Use these cables to bridge telephone based switch boards and equipment require a Centronics 50 (CN50) type Amphenol connector. 25 twisted pair cables are typically used with 66 type blocks in telephone (distribution and routing) applications.

Bluetooth Wireless Earbuds w/ Charging Case, Black

Cat6 Keystone Jack, Red, RJ45 Female to 110 Punch Down. Have you been searching for a dependable keystone for your RJ45 female to 110 punch down connections? At CableWholesale, we offer the Red Cat6 Keystone, a versatile product that requires no tools to install. This keystone allows for fast data transfer rates, and it is even compatible with gigabit speed products. Furthermore, it will work well with other keystone products we sell like patch panels and wall plates. You can also use this Red Cat6 Keystone for both networking and phone lines in any environment. We only offer high-quality products, which is why this keystone features gold connectors, pure copper conductors, and other great features. It even exceeds the EIA/TIA/568-C standard. If you would like additional details about this keystone or the others we have for sale, contact CableWholesale today!

Cat5e Ethernet cables of the 35 foot length have a variety of uses. These cables will provide a greater reach for those situations that require more serious distances. These Ethernet Cables are great for the home office or any other environment. This particular cable is a blue UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.

• Supports Video-Mirroring & Extended desktop modes
• For use with iMac, Mac Mini, Mac Pro, Xserve, Macbook Pro, Macbook Air and other Mini DisplayPort/Thunderbolt equipped devices
• Mini-DisplayPort supports resolutions up to 2160p
• Mini DisplayPort connector is fully compliant with the Thunderbolt interface
• Supports HDCP signals
• Length: 20cm (approx)
• Color: White
• Warranty: 2 Years

• 24K gold plated contacts with chrome plated connector hoods, fully shielded cable and additional strain relief
• Ethernet support allows IP devices to connect to the internet via a compatible HD TV
• Supports resolutions up to 4 x higher than 1080p
• Full support for HEC, ARC and CEC compliant devices
• Deep Color capable – supports over 1 billion Colors; x.v.Color and xvYCC ready
• Very compact connector size – ideal for use with recessed HDMI sockets
• 10 year warranty

The CROMO^® High Speed HDMI to Mini HDMI Cable with Ethernet is a superb, high quality cable, ideal for use with mobile phones, smartphones, digital cameras, camcorders and home cinema installations.

It provides premium quality cable construction at an affordable price and features 24K gold plated contacts for optimum conductive ability and resistance to tarnishing and corrosion.

HDMI ATC (Authorised Test Centre) certified for High Speed Category 2 compliance.

HDMI – The Standard for Connecting HDTV

All Digital
No compression, no conversion, pure digital direct from the source as it was meant to be seen and heard.

One Cable
All of your HD video and audio in one cable.

Say goodbye to cable clutter.

One HDMI cable can replace up to 8 audio and 5 video cables.

“

Cat6 Blue Copper Ethernet Patch Cable, Clear Finger Boot, POE Compliant, 25 feet

This adapter will convert a female 1/4″ mono connector into a single male mono RCA connector. This is male to female adapter.

Cat6a Ethernet cables of the 15 foot length have a variety of uses. These cables will suffice for connecting routers/switches to Cable/DSL modems, computers to routers/switches, computers to other computers/laptops or even in the server/network room for connecting ports on patch panels. These Ethernet Cables are great for the home office or any other environment. Cat6a was developed to achieve maximum distance of 90 meters for full 10-Gigabit network speeds. This robust spec will afford you the extra headroom across your network that Cat6 can not. The 500 Mhz performance is double that of Category 6 and five times the bandwidth capacity of Category 5e. The extra performance is ideal for Power over Ethernet (PoE) and Voice Over Internet Protocol (VoIP) applications where data loss is audibly and visually seen and heard. The latest draft declares a new measurement for Power-Sum Alien Crosstalk to ensure neighboring pairs do not cause disturbance to the other cables. The cable center isolator maintains strict pair separation optimizing NEXT performance. Our Cat6a patch cables are complete end-to-end solution and are tested for compliance with all EIA/TIA-568-C Category 6 specifications. This particular cable is a green UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. Cat6a cable includes a spline and ribbing to help ensure separation between the pairs which limits cross talk. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat6a patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life.

Our blue 6 foot USB 3.0 SuperSpeed printer/device cables offer the next great leap in data transfer speeds for your periferals. These particular USB 3.0 cables feature a Type A Male (Computer/Tablet/Laptop/Hub side) to Type B Male (Device side, looks square). This USB SuperSpeed cable enables one to connect a printer, scanner, external hard drive and more to your computer, laptop, netbook or notebook. They work for Windows, Mac, Android and Linux. The 3.0 specification boasts amazing performance improvements that will allow consumers and businesses to get more done in less time, while still supplying full backwards compatibility with previous USB versions. USB 3.0 SuperSpeed features a 10 fold improvement in signaling rate that translates to 5 Gbps versus the older 480 Mbps (USB 2.0). The new Sync-N-Go technology which minimizes user wait time (devices detect and sync faster). USB 3.0 is bi-directional allowing information transfers in both directions at the same time. Add to this the new support for a new interrupt driven protocol, the device can initiate the transfer, vs the old host based device polling. The old way had the USB controller constantly pinging the device, now the device lets the host know when actions start. Lastly USB 3.0 increases power output from 500 mA to 900 mA for faster charging of attached devices and support of more robust peripherals.

Cat6 Ethernet cables of the 1 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. Cat6 cables are used for networking, data transfer, and phone lines. Cat6 Cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a purple UTP (Unshielded Twisted Pair) bootless patch cable. Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat6 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat6 Ethernet patch cables exceed the EIA/TIA-568-C standard.

LC OM5 Duplex 2.0mm Fiber Optic Patch Cord, Wideband Multimode WDM 50/125, Lime Green Jacket, Beige Connector, 0.2 meter (0.78 foot)

Comzon® 10K/8K/4K 48Gbps Ultra-High-Speed Certified HDMI Cable, 4K120 / 8K60 / 10K, HDMI-A Male, Silver & Black woven jacket, 3 meter

This 25-foot Category 8.1 cable, Class I channel, features a gray PVC jacket, braided outer shield, with four individually mylar foil shielded 24 AWG pure copper pairs as defined in ISO/IEC 11801 and ratified in ANSI/TIA 568-C.2-1. Cat8 cabling was designed primarily for high-speed data centers where switches, servers, and other network hardware are located in close proximity. This newest copper communications cable offers greater flexibility both literally and in distances when compared to QSFP+ and Twinax DAC assemblies which typically cost significantly more and are often much more limited in scope. It has the reach to cover Top-of-Rack and End-of-Row or Middle-of-Row network topologies while delivering 10, 25, and 40 Gigabit data rates over BASE-T technology with RJ45 ends making it a drop-in replacement for Cat6a where rates beyond 10Gb will be needed today or in the future. Cat8 has stricter specifications for noise restriction and crosstalk than any of its predecessors. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat8 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. Each pair of conductors is shielded with an aluminum mylar foil to reduce, if not eliminate, crosstalk. These cables also have a braided shield, which protects from outside electromagnetic interference.

Cat6a Ethernet cables of the 35 foot length have a variety of uses. These cables will provide a greater reach for those situations that require more serious distances. These Ethernet Cables are great for the home office or any other environment. Cat6a was developed to achieve maximum distance of 90 meters for full 10-Gigabit network speeds. This robust spec will afford you the extra headroom across your network that Cat6 can not. The 500 Mhz performance is double that of Category 6 and five times the bandwidth capacity of Category 5e. The extra performance is ideal for Power over Ethernet (PoE) and Voice Over Internet Protocol (VoIP) applications where data loss is audibly and visually seen and heard. The latest draft declares a new measurement for Power-Sum Alien Crosstalk to ensure neighboring pairs do not cause disturbance to the other cables. The cable center isolator maintains strict pair separation optimizing NEXT performance. Our Cat6a patch cables are complete end-to-end solution and are tested for compliance with all EIA/TIA-568-C Category 6 specifications. This particular cable is a blue UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. Cat6a cable includes a spline and ribbing to help ensure separation between the pairs which limits cross talk. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat6a patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life.

This black modular adapter converts from a DB25 male to an RJ45 socket. By its very nature the pin outs are user configurable to match any needs you may have. The leads are “flying leads” to provide you with more leeway when inserting the pins. A modular adapter is typically used to traverse log distances over a 8 conductor phone line / network cable.

Our bulk 1000ft solid Cat6 shielded Ethernet cable is perfect for in-wall installations or installs in a busy electronic environment. Shielded cables are designed to prevent Electro-Magnetic Interference, ensuring the best signal possible. This is a yellow, shielded, solid cable. The individual conductors are 23AWG (American wire gauge) solid pure copper for permanent installations. Our Cat6 Ethernet cable exceeds the EIA/TIA-568-C standard. Comes on a convenient spool. *Please note, due to the size of the conductors of this cable, it cannot be terminated with regular connectors. This cable is intended to be punched down into keystones or patch panels.

The Smart Keeper Micro USB Type B Port Locks with Key is a physical cybersecurity device that prevents unauthorized device access by physically blocking unused Micro USB-B ports.

• Bundle: four locks plus one key.
• Easy to Use: It can be installed by hand.
• Various Patterns: Multiple color patterns are available.
• All-Purpose Key: A common key can be used to unlock nine different products within the Essential Series.
  • USB Type B Port Lock
  • USB Type C Port Lock
  • Mini USB Type B Port Lock
  • Display Port Lock
  • Mini Display Port Lock
  • SD Port Lock
  • CF Port Lock
  • RJ11 Port Lock
• Click here to compare this product with the rest of your Smart Keeper items.

Part No. MUL04PK

RGB Gaming Mouse, USB, Black

This ivory raceway piece is a flat elbow (90 degree), it is designed to lay flat on the ground and bridge two straight 3/4 inch raceway runs at a corner. Use surface mount cable raceways to protect and tidy up cable runs around the home or office where running through walls is not possible or practical. These raceways are useful for nearly any type of cable from phone, network, USB, VGA, Audio/Video, Speaker and more. Some sample applications would be: office cubicles where walls are not available or the working space can change configuration or in the existing home where one wants to install surround speakers and hide/protect the speaker cables/wires.