This 7-foot Category 8.1 cable, Class I channel, features a white PVC jacket, braided outer shield, with four individually mylar foil shielded 24 AWG pure copper pairs as defined in ISO/IEC 11801 and ratified in ANSI/TIA 568-C.2-1. Cat8 cabling was designed primarily for high-speed data centers where switches, servers, and other network hardware are located in close proximity. This newest copper communications cable offers greater flexibility both literally and in distances when compared to QSFP+ and Twinax DAC assemblies which typically cost significantly more and are often much more limited in scope. It has the reach to cover Top-of-Rack and End-of-Row or Middle-of-Row network topologies while delivering 10, 25, and 40 Gigabit data rates over BASE-T technology with RJ45 ends making it a drop-in replacement for Cat6a where rates beyond 10Gb will be needed today or in the future. Cat8 has stricter specifications for noise restriction and crosstalk than any of its predecessors. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat8 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. Each pair of conductors is shielded with an aluminum mylar foil to reduce, if not eliminate, crosstalk. These cables also have a braided shield, which protects from outside electromagnetic interference.

• Sits inline to measure current and voltage output from any USB port
• Wide voltage and amperage range (up to 24 Volts / 6 Amps)
• 6 Digit LED display for clear and accurate readings
• Compatible with QC 1.0, 2.0 and 3.0
• 2 year warranty

The LINDY USB Power Meter plugs directly into any powered USB port. It allows for easy, convenient monitoring of output voltage and operating current. It quickly tells you if your USB socket is providing power normally and if devices are receiving enough power to operate. A LED display allows you to instantly read the information without affecting the performance of the device.   

It is ideal for monitoring the power usage of an external drive or other USB peripherals as well as checking the power demands of your smartphone, tablet etc. It can also be used to check the different power outputs of your computers USB Ports, wall charger, battery pack, or even a USB enabled solar panel. Compatible with Quick Charge technology it can easily read any voltage up to 24 volts or measure any current up to 6 amps.

Depending on the orientation of your USB Ports combining the USB Power Meter with one of our Passive Type A Male to Female USB Extension Cables or 90 Degree Male to Female L-Adapters, will allow for easier positioning and viewing of the LCD display.

Please note – USB sockets will only output as much power as is demanded by the device you are charging, the USB Power Meter will show the voltage and amperage being delivered from the USB port. It will not show the maximum possible power output from the USB socket.

Cat6 Ethernet cables of the 1.5 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. Cat6 cables are used for networking, data transfer, and phone lines. Cat6 Cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a black UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat6 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat6 Ethernet patch cables exceed the EIA/TIA-568-C standard.

Power Cord, C14 to C15 , 14AWG, 15 Amp, UL SJT, Black, 6 foot

Cat5e Ethernet cables of the 50 foot length have a variety of uses. These cables will provide a greater reach for those situations that require more serious distances. These Ethernet Cables are great for the home office or any other environment. This particular cable is a white UTP (Unshielded Twisted Pair) bootless patch cable. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.

Cat5e Ethernet cables of the 3 foot length are typically used to connect a Cable or DSL modem to a router/switch in the home or office or for particularly long patch panel runs inside server/network rooms. Though you may find many uses for such a length. This particular cable is a white UTP (Unshielded Twisted Pair) bootless patch cable. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.

Mini 25mm Fusion Splice Sleeves, 50 Pack

This adapter connects a USB C equipped computer or smartphone to a TV, monitor, or projector with an HDMI input. The USB C device must support DP Alt Mode or Thunderbolt 3. This adapter measures 6 inches in length and is white in color. Details

• USB C device must support DP Alt Mode or Thunderbolt 3
• Supports HDMI resolutions up to 4K@60Hz
• Supports HDCP 2.2
• Supports HDMI bandwidth up to 18 Gbps
• No external power required

*An HDMI cable is also required to complete the connection* **Some older Apple laptops will require manual adjustment to 4K@30Hz resolution**

The Smart Keeper Mini Display Port Lock is a physical cybersecurity device that prevents unauthorized connection to unused mini display ports.

Key NOT included

Requires one Smart Keeper Lock Key Mini for removal. Key and locks must be the same color.

• Easy to Use: It can be installed by hand.
• Various Patterns: Multiple color patterns are available.
• All-Purpose Key: A common key can be used to unlock nine different products within the Essential Series.
  • USB Type B Port Lock
  • USB Type C Port Lock
  • Mini USB Type B Port Lock
  • Micro USB Type B Port Lock
  • Display Port Lock
  • SD Port Lock
  • CF Port Lock
  • RJ11 Port Lock
• Click here to compare this product with the rest of your Smart Keeper items.

Part No. MD04P1

Armored Cat6a Copper Ethernet Cable, Anti-Rodent, 10 Gigabit, 24AWG, POE Compliant, 500MHz, POE Compliant, 25 foot

• Supports Video-Mirroring & Extended desktop modes
• For use with Mini DisplayPort equipped computers
• Mini DisplayPort supports resolutions up to 1920 x 1200
• Length: 1m (approx)
• Color: White
• Warranty: 2 Years

Comzon® Cat6 Black Ethernet Patch Cable, Snagless/Molded Boot, 14 foot