Our white plenum solid Cat6a Ethernet cable is used for networking and phone infrastructure and comes in a convenient spool. Cat6a Cable is used in network applications and has been designed specifically for 10 Gigabit Ethernet applications. This particular cable is a plenum rated white UTP (Unshielded Twisted Pair) bulk cable. The individual conductors are 23 AWG (American wire gauge) solid pure copper. Our Cat6a Ethernet cable exceeds the EIA/TIA-568-C standard. In a typical residential environment, an in-wall rated cable will suffice. However, commercial installations of cabling will have more requirements. In commercial buildings, there will be an area between floors or above office areas for heating/cooling airflow called the Plenum. If an office were to catch fire, this plenum area could easily allow the spread of the fire to more floors or across the entire building. Cables that do not have a jacket rated for in wall or plenum use could actually cause the fire to become more intense. Plenum rated cables are jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP) for less toxicity during a fire. If a fire gets into a plenum rated area that contains plenum rated cables and the fire spreads, the cables will not be to blame.

Cat6a Ethernet cables of the 25 foot length have a variety of uses. These cables will provide a greater reach for those situations that require more serious distances. These Ethernet Cables are great for the home office or any other environment. Cat6a was developed to achieve maximum distance of 90 meters for full 10-Gigabit network speeds. This robust spec will afford you the extra headroom across your network that Cat6 can not. The 500 Mhz performance is double that of Category 6 and five times the bandwidth capacity of Category 5e. The extra performance is ideal for Power over Ethernet (PoE) and Voice Over Internet Protocol (VoIP) applications where data loss is audibly and visually seen and heard. The latest draft declares a new measurement for Power-Sum Alien Crosstalk to ensure neighboring pairs do not cause disturbance to the other cables. The cable center isolator maintains strict pair separation optimizing NEXT performance. Our Cat6a patch cables are complete end-to-end solution and are tested for compliance with all EIA/TIA-568-C Category 6 specifications. This particular cable is a green UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. Cat6a cable includes a spline and ribbing to help ensure separation between the pairs which limits cross talk. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat6a patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life.

This Aqua Blue jacketed 6 meter (~19 feet) 10 gigabit rated fiber optic cable is terminated with LC (Lucent Connector) connectors on both ends. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)

This 6 foot black cable features a flat body (only 1.8mm thick) for running on the floor or against baseboards. Cat6 cables can support 10 / 100 / 1000Mbps. The cable has stranded 32 AWG (American Wire Gauge) conductors for greater flexibility. Cat6 cables are used for networking, data transfer, and phone lines. Cat6 Cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a black UTP (Unshielded Twisted Pair) patch cable with molded boots. The connectors are wired to the T568B standard. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat6 Ethernet patch cables exceed the EIA/TIA-568-C standard.

Shielded Plenum Security Cable, White, 22/2 (22 AWG 2 Conductor), Stranded, CMP, Spool, 1000 foot

• IEEE 802.3af compliant
• Input: 100-240V AC 50/60Hz 0.4A
• Output: 48V DC 16W (Max)
• LED indicators for Link, Activity, and Error
• Autosensing, detects when a compatible device is connected and turns on
• Protection circuit detects short circuit, overload and automatically turns off
• Uses standard RJ45 connections
• Operating distance: Up to 90m
• Operating distances may vary depending on the cable type used and the power requirements of the connected device
• Ideal for use with existing installations where additional power cables cannot be installed easily
• 2 Year warranty

DC Power Plug to 19AWG Bare Wire, DC Male to Open Ends, 1 foot

This high-frequency coaxial splitter is designed for residential and commercial applications. The diode protected circuitry allows the DC power to pass from any output port to the input port and prevents DC back feeding. This coaxial splitter has one input and 2 outputs. Features

• 15 – 2150 MHz Wideband Operation
• High Return Loss
• Flat Frequency Response
• Flat End F Ports with 1 inch Spacing
• Solder Back Case (-130 dB RFI Shielding
• DISH Network Approved

This adapter will convert a female DB9 serial cable end into a null modem male end. This device is covered under a lifetime warranty.

This surface mount phone jack comes with a flat piece of adhesive that enables it to be attached directly to the wall without the need of tools. For phone use only (Note: the color coding on the internal connections does not match Cat5e or Cat6).

Our 3 foot USB A to C cable allows you to connect any new device that uses the C type USB port, the new reversible one, to any computer, laptop, wall wartt/charging block or other device which uses the older style rectangular port that is known as the USB A port. The transfer speeds and charge speeds will be limited to the device and possibly the USB 3.1 specification.