• IEEE 1394 compliant
• Gold Plated connectors to prevent oxidization for maximum reliability

• 4 pin connector also known as i.Link or DV connector

• Transparent cable
• Fully moulded
• 10 year warranty

Cat6 Ethernet cables of the 3 foot length are typically used to connect a Cable or DSL modem to a router/switch in the home or office or for particularly long patch panel runs inside server/network rooms. Though you may find many uses for such a length. Cat6 cables are used for networking, data transfer, and phone lines. Cat6 Cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a red UTP (Unshielded Twisted Pair) bootless patch cable. Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat6 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat6 Ethernet patch cables exceed the EIA/TIA-568-C standard.

Cat5e Keystone Jack, Black, RJ45 Female to 110 Punch Down

This cable is a blue STP (Shielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. Cat6a cable includes a spline and ribbing to help ensure separation between the pairs which limits cross talk. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat6a patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life.

Our yellow plenum solid Cat6 Ethernet cable comes in easy to use spools. It is used for networking and phone infrastructure. Cat6 Cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This cable is a plenum rated yellow solid bulk cable. The individual conductors are 23 AWG (American wire gauge) solid pure copper. Our Cat6 Ethernet cable exceeds the EIA/TIA-568-C standard. In a typical residential environment, an in-wall rated cable will suffice. However, commercial installations of cabling will have more requirements. In commercial buildings, there will be an area between floors or above office areas for heating/cooling airflow called the Plenum. If an office were to catch fire, this plenum area could easily allow the spread of the fire to more floors or across the entire building. Cables that do not have a jacket rated for in wall or plenum use could actually cause the fire to become more intense. Plenum rated cables are jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP) for less toxicity during a fire. If a fire gets into a plenum rated area that contains plenum rated cables and the fire spreads, the cables will not be to blame.

• USB Type A Male to USB Type A Male
• Features 28AWG for Data and 26AWG for Power
• Fully moulded
• Length: 0.5m
• 10 year warranty

 

The LINDY Type A to Type A high quality USB cable complies fully with the USB 2.0 specification allowing data transfer speeds of up to 480Mbit/sec.

 

This cable is a white UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The individual conductors are 24AWG (American wire gauge) stranded pure copper. Cat 6 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion, thus ensuring a longer cable life. Our Cat 6 Ethernet patch cables exceed the EIA/TIA568B standard. Cat6 Cables can be used for networking, data transfer or phone lines.

Armored 12 Strand Indoor/Outdoor Fiber Optic Distribution Cable, OS2 9/125 Singlemode, Corning Optical Fiber, Riser Rated, Black, Spool, 500 foot

Write-Once-Read-Many commercial grade memory cards are specifically built for applications where data reliability and safety are paramount.
A unalterable, non-rewritable, and non-erasable solution that ensures data integrity within the WORM SD/MicroSD cards.
FLEXXON WORM card comes in Default WORM card mode that do not require activation of any software application.

Surge Protector, Flat Rotating Plug, 6 Outlet, Gray Horizontal Outlets, Plastic, Power Cord 25 foot. These gray Surge Protectors have 6 horizontal outlets and feature a flat 360 degree rotating plug which will provide more flexibility when selecting a wall outlet. Now you can plug in behind furniture and get around other obstacles with ease. This model has a 25 foot power cord. Our 6-Outlet Power Strips are UL listed, factory tested and designed for safety. The built-in circuit breaker prevents overloading of the power strip. All outlets are grounded to protect you, your home and your equipment. Electrical Rating: 125 Volts AC. 15 Amps. 1800 Watts. Max Surge Voltage: 6KV. Max Surge Dissipation: 180 joules. Max Spike Current: 12000 Amps. Clamping Response Time: Less than 1 nanosecond. Temperature Range: -40 C to +80 C.

Rackmount D Ring Cable Management Kit, 1U. The 1U D-Ring Cable Management Kit gives Installers and Network Technicians a flexible and functional cable management bracket that will easily manage all types of cables. 1U D-Ring Cable Management Kits include 16 snap-in plastic clips and 5 specially designed D-rings that attach to a blank panel in 5 different positions. With over 43 different configurations it is easy to manage cables vertically, horizontally, and diagonally. The 1U D-Ring Cable Management Kit eliminates the need for dozens of other cable management brackets. Finally a single cable manager that can do it all.

Cat6 Ethernet cables of the 200 foot length have a variety of uses. These cables will provide a greater reach for those situations that require more serious distances. These Ethernet Cables are great for the home office or any other environment. Cat6 cables are used for networking, data transfer, and phone lines. Cat6 Cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a gray UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat6 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat6 Ethernet patch cables exceed the EIA/TIA-568-C standard.

Two pack of replacement blades specifically for the EXO-EX Die([part]100061C[/part]). A sharp blade assures your tool will neatly trim the wire from the ends of the connectors for crisp, clean crimps every time. Always have a spare on hand.

• Supports high-bandwidth, uncompressed digital video, multi-channel digital audio and control
• HDMI Full HD 1080p and HEC compatible
• HDMI 2.0 compliant, supporting Ultra HD up to 4K 2160p@30hz
• For connecting longer lengths up to 45m use with LINDY Premium Gold HDMI Cables
• 2 year warranty

 

Please note: Some projectors have recessed HDMI sockets.

 

You should make sure they can accommodate the connector used on this cable.

 

• The connector dimensions are 19 x 38 x 11mm (WxDxH)

 

• High Speed HDMI Active Cables cannot be connected together or ‘daisy chained’

 

• HDMI – The Standard for Connecting HDTV

 

• All Digital

 

• No compression, no conversion, pure digital direct from the source as it was meant to be seen and heard

 

• One Cable

 

• All of your HD video and audio in one cable

 

• Say goodbye to cable clutter

 

• One HDMI cable can replace up to 8 audio and 5 video cables

 

 

 

The new HDMI High Speed specification offers benefits over the previous version:

 

HDMI Ethernet Channel (HEC)

 

The High Speed HDMI HEC Cable specification has an additional data channel that enables high speed bidirectional communication.

 

Connected devices that include this feature will be able to send and receive data via 100mb/sec ethernet, making them instantly ready for any IP based application.

 

It will also allow internet enabled HDMI devices to share their internet connection with other HDMI devices without the need for a separate ethernet cable.

 

This new feature will also provide the connection platform to allow HDMI enabled devices to share content between devices.

 

Audio Return Channel (ARC)

 

The new specification will add an Audio Return Channel that will reduce the number of cables required to deliver audio upstream for processing and playback.

 

In cases where HDTV’s are directly receiving audio and video content, this new Audio Return Channel allows the HDTV to send the audio stream to the A/V receiver over the HDMI cable, eliminating the need for an extra cable.

 

3D

 

The new specification will define common 3D formats and resolutions for HDMI-enabled devices.

 

The specification will standardise the input/output portion of the home 3D system and will specify up to dual-stream 1080p resolution.

 

 

 

4K

 

The new specification will enable HDMI devices to support high-definition (HD) resolutions four times beyond the resolution of 1080p.

 

Support for 4K will allow the HDMI interface to transmit content at the same resolution as many digital theatres.

 

Formats supported include:

 

• 3840 x 2160 @ 24Hz/25Hz/30Hz
• 4096 x 2160 @ 24Hz

Content Type

 

Content Type enables, automated picture setting selection with no user intervention.

 

The Content Type feature enables a display to auto-detect the correct viewing mode to match the Content Type it is receiving from a source device, and to switch modes when a new contect cource is selected.

 

Content Type supports content profiles for gaming, movie, photograph and text viewing modes.

 

Audio Formats

 

HDMI supports multi channel digital audio on a single cable.

 

It transmits all ATSC HDTV standards and supports 8-channel, 192kHz, uncompressed digital audio and all currently available compressed formats (such as Dolby Digital & DTS), HDMI 1.3 adds additional suopport for new lossless digital audio formats Dolby TrueHD and DTS-HD Master AudioTM with bandwidth to spare to accomodate future enhancements and requirements.

 

The following formats are supported:

 

• SA-CD
• DTS-HD Master AudioTM
• DVD-Audio
• Dolby TrueHD
• Dolby Digital / Plus
• MPEG1 Layer I / II
• MPEG2
• MP3
• AAC LC
• DST / DSD (as used in SA-CD)
• DTS
• ATRAC
• WMA Pro
• MLP (as used in DVD-Audio)

 

 

Expanded Support for color Spaces

 

HDMI technology now supports color spaces designed specifically for digital still cameras.

 

By supporting sYCC601, Adobe RGB and AdobeYCC601, HDMI-enabled display devices will be capable of reproducing more accurate life-like colors when connected to a digital still camera.

Cat5e Ethernet cables of the 50 foot length have a variety of uses. These cables will provide a greater reach for those situations that require more serious distances. These Ethernet Cables are great for the home office or any other environment. This particular cable is a white UTP (Unshielded Twisted Pair) bootless patch cable. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.

Cat6 Green Copper Ethernet Patch Cable, Clear Finger Boot, POE Compliant, 25 feet

Recessed Pro-Power Kit with Duplex Receptacle and Straight Blade Inlet, White<-p>.

The Recessed Pro-Power Kit with Duplex Receptacle and Straight Blade Inlet is used to install power and low voltage cables behind your HDTV, your amplifier or other audio-video devices. This power relocation kit allows you to pass low voltage cables and power through the wall, creating a professional, clean look for every home theater. This kit is available in a surge model.<-p>

• Full CAT5e specification with moulded snagless boots
• Snagless strain relief prevents damage to the RJ-45 latch during installation and removal
• Gigabit Ethernet ready
• 100% performance tested
• Stranded core cables allowing repeated flexing without damage, prolonging the life of the cable
• Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
• Useful for Color coding your departments, workgroups, etc.
• 10 year warranty

LGX Compatible Adapter Plate featuring a Bank of 6 Multimode Quad LC Connectors in Aqua for OM3 and OM4 10Gbit applications, Black Powder Coat. Connectivity Center LGX Styled Adapter Plates are easy snap-in mounting in our Rack and wallmount enclosures. Available in black powder coat. Details

• 6 Multimode Quad LC Connectors
• Aqua for OM3 and OM4 10 Gigabit applications
• 5.1 inch (130mm) x 1.13 inch (28.7mm)
• Easy snap-in mounting in our fiber Rack and wallmount enclosures
• utilizes a ceramic alignment sleeve
• Available in black powder coat
• LGX Compatible

Cat6 Black Flat Ethernet Patch Cable, 32 AWG, 1.5 foot

Bulk Phone Cord, Silver Satin, 26/4 (26 AWG 4 Conductor), Spool, 1000 foot. This is an 1000 foot silver satin bulk reel of phone cable. This spool is sold with bare ends; you can choose your own from a variety of different connectors.

4U Fiber Optic Patch Panel, Capacity 12 LGX Adapter Plates / Cassettes / Modules, Unloaded, Solid Door, Black Powder Coat. Our 4U Fiber Optic Patch Panel provides many flexible fiber patching configurations in a 2U form factor. It accommodates up to 12 LGX adapter plates, MPO break modules or splitter cassettes. Slide out trays and removable front and back doors allow easy access to the patch bay. Multiple cable retention brackets and tie down spots allow for convenient cable management. Spring-loaded stop latches keep the tray securely in place when retracted. This enclosure installs into a standard 19-inch rack and includes non-flush brackets. Adapter plates, 23 inch mounting brackets and 19 inch flush mounting brackets are sold separately. Slide-Out Patch Panel Enclosures are designed for both high and low density patching and splicing applications. Constructed from durable 14 gauge aluminum, these enclosures are lightweight and rugged. Cable organization features include may slack management spools, cable routing rings and tie down bridge stances. All our fiber rack mount enclosures fit standard 19 inch racks and cabinets. Details

• 19 or 23 inch rack mountable (23 inch mounting brackets sold separately)
• Accepts 12 LGX style adapter plates, modules or cassettes
• Vertically mounted panels with cable retaining rings on the front entry
• Hinged front and rear removable doors
• Dimensions: 17in W x 14in D x 7.125in H
• Powder coated 0.60 inch Aluminum

This 2 meter (~6 feet) fiber optic cable is terminated with ST (Straight Tip/Bayonet Connector) connectors on both ends. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)

Slim Cat6 Ethernet cables of the 1/2 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. Cat6 cables are used for networking, data transfer, and phone lines. Cat6 Cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a white UTP (Unshielded Twisted Pair) patch cable with translucent clear boot (snagless installation) and extra protection for the RJ45 connector and clip. Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk. The connectors are wired to the T568B standard. The individual conductors are 28AWG (American wire gauge) stranded pure copper. Cat6 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat6 Ethernet patch cables exceed the EIA/TIA-568-C standard.