Cat6 Ethernet cables of the 1/2 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. Cat6 cables are used for networking, data transfer, and phone lines. Cat6 Cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a orange UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat6 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat6 Ethernet patch cables exceed the EIA/TIA-568-C standard.

• Supports Video-Mirroring & Extended desktop modes
• For use with Mini DisplayPort equipped computers
• Mini DisplayPort supports resolutions up to 1920 x 1200
• Length: 1m (approx)
• Color: White
• Warranty: 2 Years

• Supports video-mirroring and extended desktop modes
• Compliant with DisplayPort 1.1 specification for both 1.62 and 2.7Gbps
• Compliant with HDMI 1.3a specification up to 2.25Gbps
• Compliant with DVI 1.1 specification up to 1.65Gbps
• PC: VGA, SVGA, SXGA and UXGA
• HDTV: 480i, 576i, 480p, 576p, 1080i, and 1080p
• Overall length: 168mm
• Color: Black
• Gold plated connectors
• 2 year warranty

• 2.5mm Stereo Jack Male to 3.5mm Stereo Jack Female
• Approx 30cm cable
• Cable Color: Black
• 10 year warranty

This is a 10ft heavy duty 16 AWG (American Wire Gauge) computer/monitor power cord, also works for certain larger printers. This power cord fits most computers, monitors, printers and various other devices. The cables ends are NEMA 5-15P (Wall Socket) and C13 (Computer/Monitor). It is rated for up to 13 AMPs. If you need a replacement computer or monitor power cord, this is likely the cable you need. These cables do carry other uses, such as larger laser printers and more industrial equipment such as embroidery machines. Please consult your manual to verify the C13 connector, your equipment would have a C14 socket.

• Extends DVI-D signals at distances of up to 300m using a single SC duplex multimode fiber optic cable

• Compatible with DVI-D 2.0 specifications including HDCP 1.1 and HDTV and HD-Ready displays
• Supports HDTV resolutions up to 1920 x 1200 @ 60Hz / 1080p @ 60 Hz and 3D
• 6Gbps Total Bandwidth over Single 2-core fiber Optic Cable Link
• IR Frequency range 35-45kHz

• 2 year warranty

Our 7.5 meter (24.5 foot) black DVI-D Dual Link cable has DVI-D male ends with thumb screws. This DVI cable features foil and braid shielding, ferrites and 24 AWG (American Wire Gauge) conductors for a high quality video signal for your display(s). This DVI-D cable is used to connect your computer to your high resolution monitor. Dual link DVI cables support high definition resolutions of up to 2560 x 1600. DVI has superseded the analog signal carrying VGA type cables for some manufacturers. While its video resolutions are similar to HDMI, it should be noted that DVI cables carry a video signal only unlike the former which also supports surround sound audio. Please note: The maximum recommended length of this DVI cable for 2560 x 1600 resolution displays is 15 meters, longer lengths will require an amplifier: Part # 41H1-144DV.

Cat6 Red Copper Ethernet Patch Cable, Clear Finger Boot, POE Compliant, 7 feet

Cat5e Ethernet cables of the 7 foot length have a variety of uses. These cables will suffice for connecting routers/switches to Cable/DSL modems, computers to routers/switches or even in the server/network room for connecting ports on patch panels. These Ethernet Cables are great for the home office or any other environment. This particular cable is a gray UTP (Unshielded Twisted Pair) bootless patch cable. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.

• 2 x 6 Pin Mini DIN Male/Female & 15 Way HD Male/Female
• PS/2 connectors are PC99 Color coded
• Innovative locking method
• Reduces cable clutter and tangle
• For use with any PC or CPU Switch using standard connectors
• Reduces the number of cables required by a third making the final solution neat and tidy
• Especially suited to CPU Switch applications
• Mouse and keyboard connectors are clearly marked at each end to avoid confusion
• High quality triple shielded S-VGA video cable for optimal video performance
• 10 year warranty

• Crimp tool for 8 Way RJ-45 type connectors
• Integral cable cutter and stripper

DisplayPort v1.4 Video Cable, 32.4 Gbit/s Data Rate, 8k@60Hz / 4k@120Hz, DisplayPort Male, 6 foot

This single gang mounting bracket is designed for use in homes and/or offices. Designed for use with face plates for low voltage installations such as networking, Home Theater, or other similar audio/video applications. This is easy to install and provides a snug wall mount to screw your wall plate into. The mounting wings adjust to fit 1/4 inch to 1 inch thick drywall.

• Allows PCs, Macs and SUN computers with USB, VGA and speaker connections to be connected to the MC5, MC5-IP and SC5 KVM switch
• Compatible with all major operating systems
• Connects to the switch via CAT5/5e cable
• Supports distances of up to 50m

This white 1.75 inch raceway piece serves as a transition where the cables need to run around the outside of a corner (the wall will be to the inside of the corner piece). It allows the installer to connect two longer straight raceway sections at a corner. Use surface mount cable raceways to protect and tidy up cable runs around the home or office where running through walls is not possible or practical. These raceways are useful for nearly any type of cable from phone, network, USB, VGA, Audio/Video, Speaker and more. Some sample applications would be: office cubicles where walls are not available or the working space can change configuration or in the existing home where one wants to install surround speakers and hide/protect the speaker cables/wires.

Slim Cat6 Ethernet cables of the 20 foot length have a variety of uses and are often run under carpets. These cables will provide a greater reach for those situations that require more serious distances. These Ethernet Cables are great for the home office or any other environment. Cat6 cables are used for networking, data transfer, and phone lines. Cat6 Cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a white UTP (Unshielded Twisted Pair) patch cable with translucent clear boot (snagless installation) and extra protection for the RJ45 connector and clip. Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk. The connectors are wired to the T568B standard. The individual conductors are 28AWG (American wire gauge) stranded pure copper. Cat6 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat6 Ethernet patch cables exceed the EIA/TIA-568-C standard.

• Supports Video-Mirroring & Extended desktop modes
• For use with Mini DisplayPort equipped computers
• Mini-DisplayPort supports resolutions up to 1920 x 1200
• Length: 3m (approx)
• Color: White
• Warranty: 2 Years

Power Extension Cord, Black, Low Profile Right Angle NEMA 5-15P to NEMA 5-15R, 13 Amp, 16 AWG, 3 foot

This 5 meter (~16 feet) fiber optic cable is terminated with ST (Straight Tip/Bayonet Connector) connectors on both ends. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)

Computer / Monitor Power Extension Cord, Black, C13 to C14, 14AWG,15 Amp, 3 foot

• Connectors: DVI-D Dual Link Male to DVI-D Dual Link Female
• 24K gold plated connectors for improved signal quality and resistance to tarnishing and corrosion
• Triple shielded, low attenuation cable design
• The patented, unique RF-BLOK full metal connector greatly reduces interference and provides increased EMC shielding without the need for a ferrite core
• Supports DVI resolutions up to 2560×1600 (WQXGA)
• Supports HDTV resolutions up to 1080p
• Available in lengths up to 10m
• Also available as an SLD (Super Long Distance) Cable in lengths up to 25m
• 25 Year Warranty

This 6 foot power cord will power UK/English notebook computers that do not require a polarized connection. The device end of this cable is a standard IEC C7 while the UK end is the BS 1363. While this cable is listed as a notebook power cord, it will work with any device that uses an IEC C7 power connection. Ideal for replacing damaged, overused, or missing UK power cords. This cable has a 5A fuse.

This 1 foot black computer/monitor/printer power extension cord features a C13 (female) connector on one end and a C14 (male) connector on the other end. The cable is SVT with 3 18AWG(American Wire Gauge) conductors rated for 125 Volts, 10 Amps and an operating temperature of 75C. This cable can be used to extend any C13 ended cable, while its primary use is computer and printer power it will work for any device that requires a C13 end and does not exceed the power rating. Some examples of other devices would be plotters, vinyl cutters and industrial embroidery machines such as the Happy line.

Server Power Extension Cord, Black, C20 to C13, 14AWG/3C, 15 Amp, 3 foot