USB C to Lightning, Charge & Sync Apple Products, White, 3 foot

• Ideal for use as a replacement phono lead for hi-fi’s and music equipment etc.
• 2 x Phono Male to 2 x Phono Male
• Moulded, Gold Plated Connectors
• Cable Color: Black
• 10 year warranty

This 5ft Cat6a Blue Slim Ethernet Patch Cable is perfect for installations that are in a tight-spot, and require a thinner cable than the typical thick Cat6a cable. Cat6a is the fastest Ethernet cable available on the market that meets TIA/EIA standards. The 500 Mhz performance is double that of Category 6 and five times the bandwidth capacity of Category 5e. The extra performance is ideal for Power over Ethernet (PoE) and Voice Over Internet Protocol (VoIP) applications where data loss can be seen and heard. Our Cat6a patch cables are tested for compliance with all EIA/TIA-568-C Category 6 specifications.

This 35-foot Category 8.1 cable, Class I channel, features a black PVC jacket, braided outer shield, with four individually mylar foil shielded 24 AWG pure copper pairs as defined in ISO/IEC 11801 and ratified in ANSI/TIA 568-C.2-1. Cat8 cabling was designed primarily for high-speed data centers where switches, servers, and other network hardware are located in close proximity. This newest copper communications cable offers greater flexibility both literally and in distances when compared to QSFP+ and Twinax DAC assemblies which typically cost significantly more and are often much more limited in scope. It has the reach to cover Top-of-Rack and End-of-Row or Middle-of-Row network topologies while delivering 10, 25, and 40 Gigabit data rates over BASE-T technology with RJ45 ends making it a drop-in replacement for Cat6a where rates beyond 10Gb will be needed today or in the future. Cat8 has stricter specifications for noise restriction and crosstalk than any of its predecessors. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat8 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. Each pair of conductors is shielded with an aluminum mylar foil to reduce, if not eliminate, crosstalk. These cables also have a braided shield, which protects from outside electromagnetic interference.

• DVI-I Single Link Digital + analog Cable
• For use with all standard digital TFT (Thin Film Transistor)/LCD (Liquid Crystal Display) Flat Panel Displays
• Single Link connection supports resolutions of up to 1920 x 1200
• Connectors: DVI-I Single Link Male to DVI-I Single Link Male
• Also available in lengths of 1, 2 and 3m.
• 10 year warranty

Cat5e Ethernet cables of the 35 foot length have a variety of uses. These cables will provide a greater reach for those situations that require more serious distances. These Ethernet Cables are great for the home office or any other environment. This particular cable is a purple UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.

Slim Cat6 Ethernet cables of the 3 foot length are typically used to connect a Cable or DSL modem to a router/switch in the home or office or for particularly long patch panel runs inside server/network rooms. Though you may find many uses for such a length. Cat6 cables are used for networking, data transfer, and phone lines. Cat6 Cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a orange UTP (Unshielded Twisted Pair) patch cable with translucent clear boot (snagless installation) and extra protection for the RJ45 connector and clip. Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk. The connectors are wired to the T568B standard. The individual conductors are 28AWG (American wire gauge) stranded pure copper. Cat6 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat6 Ethernet patch cables exceed the EIA/TIA-568-C standard.

Our 6 foot USB mini cable features a USB type A male connector on one end and a Mini-B 4 pin male on the other. It supports USB Hi-Speed/2.0 and is backwards compatible with USB 1.1. A USB type A male to USB mini-B male cable is commonly used as a digital video camera cable, cell phone cable, digital picture frame cable and many others. The cable listed here has a USB type A male connection to be plugged into a computer on one side. On the other side is a USB mini-B type connector with 5 pins. In the world of portable devices, many different types of mini USB cables are used. The picture above shows exactly how the connectors on this cable look, so make sure this matches your device. You may need to consult the specifications of your device to make sure what type of cable you need. This USB-A male to mini USB-B male cable features gold contacts to prevent corrosion and prolong the life of the cable. A USB 2.0 cord offers the fastest USB speeds currently available on most devices and is fully backwards compatible with USB 1.0 and USB 1.1. The maximum length of a USB 2.0 A-male to Mini-B cable is 15 ft. If you desire a length longer than 15 feet, you can use an active 2.0 repeater cable or a hub, both of which we offer at a great price. 2.0 repeater cable or a hub, both of which we offer at a great price.

SFP 1 Gigabit Ethernet 850nm Multimode, 550 m range, MSA Standard Compatible.

• ST Female to ST Female, Simplex
• Multi-mode
• Mounts into a standard 3/8″ ‘D’ Hole
• Ceramic ferrule
• Metal housing

Professional audio cables are a must for any musician looking to take their act to the next level. Our premium TS-M (Tip Sleeve Mono) cable is perfect for guitars and other instruments requiring an unbalanced connection to amplifiers and other equipment. They feature a pure copper conductor, a tough outer PVC jacket wrapped in a woven sleeve designed to keep you playing for years. 10-foot length Gold Plated Tip Braided Shield

• 25 Way D Male to 36 Way Centronics Male
• Bi-directional
• Full IBM specification
• 25 connections
• Fully moulded
• 10 year warranty

This Cat5e 50 foot gray crossover cable is used for networking, data transfer and phone lines. For use from a DSL/cable modem directly to the PC and for a direct link from PC to PC. This particular cable is a gray UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.

Armored 12 Strand Indoor/Outdoor Fiber Optic Distribution Cable, OS2 9/125 Singlemode, Corning Optical Fiber, Riser Rated, Black, Spool, 500 foot

Cat6 Ethernet cables of the 6 foot length have a variety of uses. These cables will suffice for connecting routers/switches to Cable/DSL modems, computers to routers/switches or even in the server/network room for connecting ports on patch panels. These Ethernet Cables are great for the home office or any other environment. Cat6 cables are used for networking, data transfer, and phone lines. Cat6 Cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a blue UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat6 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat6 Ethernet patch cables exceed the EIA/TIA-568-C standard.

Crimping Tool for RJ11 / RJ12 / RJ45. This device is used to crimp RJ11 / RJ12 phone connectors and RJ45 Ethernet connectors onto cables. Works with Part Numbers: 31D0-500HD, 31D0-510HD, 31D0-52050, 31D0-520HD, 31D0-51007, 31D0-58007, 31D0-6P4CS, 31D0-580HD and 31D0-6P6CF.

Cat5e Ethernet cables of the 6 foot length have a variety of uses. These cables will suffice for connecting routers/switches to Cable/DSL modems, computers to routers/switches or even in the server/network room for connecting ports on patch panels. These Ethernet Cables are great for the home office or any other environment. This particular cable is a red UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.

This 25ft Bootless Plenum Cat5e Gray Ethernet Patch Cable is perfect for short runs in buildings or government installations.The plenum rating means that the cable is jacketed in materials which have low toxicity smoke characteristics and fire retardant properties. The Plenum of a building is the area between floors or above office areas for heating/cooling airflow. This cable meets the strictest requirements for any building codes.

Cat5e Ethernet cables of the 25 foot length have a variety of uses. These cables will provide a greater reach for those situations that require more serious distances. These Ethernet Cables are great for the home office or any other environment. This particular cable is a red UTP (Unshielded Twisted Pair) bootless patch cable. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.

Our gray bulk 1000 foot solid Cat6a Shielded Ethernet cable comes in a convenient spool and is ideal for the person looking to make longer permanent network runs during installation/expansion of network infrastructure. Cat6a was developed to achieve maximum distance of 100 meters for full 10-Gigabit network speeds. This robust spec will afford you the extra headroom across your network that Cat6 can not. The 500 Mhz performance is double that of Category 6 and five times the bandwidth capacity of Category 5e. The extra performance is ideal for Power over Ethernet (PoE) and Voice Over Internet Protocol (VoIP) applications where data loss is audibly and visually seen and heard. The latest draft declares a new measurement for Power-Sum Alien Crosstalk to ensure neighboring pairs do not cause disturbance to the other cables. The cable center isolator maintains strict pair separation optimizing NEXT performance. Our Cat6a bulk cable tested for compliance with all EIA/TIA-568-C Category 6a specifications. This particular cable is a gray shielded twisted pair solid cable. Cat6a cable includes a spline and ribbing to help ensure separation between the pairs which limits cross talk. The individual conductors are 23 AWG (American wire gauge) solid pure copper. Pure copper conductors provide the best signal possible. This bulk CAT6a cable will not be able to be crimped onto any connectors. The wires are simply too thick to fit. This cable should be punched down into a CAT6a keystone jack on one end and patch panel on the other end.

Security/Alarm Wire, Gray, 18/4 (18AWG 4 Conductor), Stranded, CMR / Inwall rated, Pullbox, 1000 foot

12 Strand Fiber Pigtail, OM2 – 50/125, Multmode Black Boot ST/PC connectors, 3 meter

• Can be used with either USB 1.1 or USB 2.0 devices

• Complies fully with the USB 2.0 specification allowing data transfer speeds of up to 480Mbit/sec

• Extends cable length between USB devices such as keyboards, mice, printers, scanners, etc
• USB Type A Male to USB Type A Female
• Fully moulded
• 10 year warranty

Cat6 Ethernet cables of the 2 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. Cat6 cables are used for networking, data transfer, and phone lines. Cat6 Cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a white UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat6 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat6 Ethernet patch cables exceed the EIA/TIA-568-C standard.

This 1 meter (3.3 foot) high-quality Plenum approved fiber optic cable is 40/100 gigabit rated MTP / LC (MPO), 12 Strand cable with a Yellow colored jacket. Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Local building codes may require all cables run inside the walls or ceiling be Plenum rated. Singlemode cables can come with many different fiber optic connector types. This particular 40/100 gigabit Singlemode fiber optic cable offers a MTP/APC connector on one end, and 4 duplex LC/UPC connectors on other. It features a 9/125 micron core.

This black 6 foot HD15 (SVGA) Male to BNC (5 Male) Breakout cable is used for connecting a PC to a monitor that utilizes BNC connectors. Our cable features a molded boot, a ferrite bead, and double-shielding to insure minimal signal loss and reduce interference.

Due to space constraints, you may need an adapter to create a 90 degree turn with your HDMI cable. This adapter will allow you to bend 90 degrees without putting strain on your HDMI cable causing signal loss or damage to the connector. This HDMI male is a different orientation than part number 30HH-50250.

• VI-D Single Link Male to DVI-D Single Link Male
• For use with all modern digital monitors, projectors and TFT/LCD Flat Panel Displays
• UXGA (1600 x 1200) and HDTV1080i (1920 x 1080) compatible
• RF-BLOK shielded design
• 10 Year Warranty

LINDY Super Long Distance DVI cables use a specially developed and optimised cable material that allows longer cable distances than the 7.5m maximum recommendation laid down by the DDWG (Digital Display Working Group).

Please note: Maximum supported distances and resolutions are dependent on both the monitor and the chipset used in the graphics card.

Features of the RF-BLOK shielded design:

• Reduced interference from one piece EMI (Electromagnetic Interference)/RFI (Radio Frequency Interference) shield

• Increased insulation resistance up to 25%

• No soldering requirements as interconnect design needs no 360 degree soldering – eliminating the possibility of human error and/or cracking of the solder that causes grounding intermittence and the use of the most hazardous waste material – soldering flux

• Tight fit of internal wires as there is no inner mould

• No requirement of ferrite cores as signal loss and degradation are greatly reduced giving enhanced signal sharpness. Without the ferrite cores the cable is less stressed and more flexible

• Smaller overall dimensions which allows more room behind the host or peripheral

• Increased connector and mating strength – the 4 point reinforcement tabs on the RF-BLOK, attached to the connector, strengthens the pair as one

“

• 15 Way HD Male to 15 Way HD Female
• Fully moulded
• 10 year warranty

This adapter will convert a Macintosh DB15 female monitor cable end into a male or allow you to connect two cables together.

Our 6 foot Cat3 telco trunk cable features two 90 degree Amphenol connectors (Female to Female) and 25 twisted pairs. Use these cables to bridge telephone based switch boards and equipment require a Centronics 50 (CN50) type Amphenol connector. 25 twisted pair cables are typically used with 66 type blocks in telephone (distribution and routing) applications.

Armored 12 Strand Indoor Fiber Optic Distribution Cable, OM1 62.5/125 Multimode, Corning Optical Fiber, Riser Rated, Orange, Spool, 500 foot

DB9 Male D-Sub Connector, Solder Type. This male DB9 D-Sub solder-type connector was designed to make your DB9 cable with ease, and without the use of any additional tools.

[geot_filter region=”” country=”SE,NL,SK,CZ,DE,RU,HU,CM,SG,MY,PH,VN,TH,HK,TW,IN,JP,KR,KP”]PLEASE CALL FOR PRICING.[/geot_filter]

The Smart Keeper Micro USB-B Port Lock Professional is a physical cybersecurity device that prevents unauthorized device access by physically blocking unused Micro USB-B ports.

Key NOT included

Requires one Smart Keeper Lock Key Mini Professional for removal.

• Easy to Use: It can be installed by hand.
• All-Purpose Key: A common key can be used to unlock various products within the Professional series.

Part No. CSK-MUL04

6 Fiber Indoor Distribution Fiber Optic Cable, Multimode, 50/125, OM4, 10 Gbit, Aqua, Riser Rated, Spool, 1000 foot