Cat6 Ethernet cables of the 7 foot length have a variety of uses. These cables will suffice for connecting routers/switches to Cable/DSL modems, computers to routers/switches or even in the server/network room for connecting ports on patch panels. These Ethernet Cables are great for the home office or any other environment. Cat6 cables are used for networking, data transfer, and phone lines. Cat6 Cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a orange UTP (Unshielded Twisted Pair) bootless patch cable. Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat6 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat6 Ethernet patch cables exceed the EIA/TIA-568-C standard.

This 1 foot power cord will power notebook computers and other appliances that require a non-polarized connection. The connector on this cable is shaped like a figure 8 with, or two circles side by side. It has a NEMA 1-15P on one end, and a Non-Polarized IEC C7 on the other. While this cable is listed as a notebook power cord, it will work with any device that uses a Non-Polarized IEC C7 power connection.

• HDMI 1.2 and HDMI 1.3b CAT 2 HD 1080p compatible

• Supports HDTV resolutions up to 1080p and DVI-D resolutions up to 1920 x 1200

• Allows the latest generation digital camcorders and other devices with Mini HDMI connectors to be connected to other devices which feature Mini HDMI connectors
• Gold plated connectors for excellent signal transfer and resistance to tarnishing and corrosion
• Fully HDMI compliant and certified
• HDCP compliant
• 10 year warranty

A full range ofHDMI Cables is available.

Our 25 foot Cat3 telco trunk cable features two 90 degree Amphenol connectors (Male to Female) and 25 twisted pairs. Use these cables to bridge telephone based switch boards and equipment require a Centronics 50 (CN50) type Amphenol connector. 25 twisted pair cables are typically used with 66 type blocks in telephone (distribution and routing) applications.

• Switch between two DisplayPort 1.2 compatible signals with a simple button push
• Supports high definition video up to 4K@60Hz, multi-channel digital audio, DPCP and HDCP 
• Supports resolutions up to 3840 x 2160
• Supports Dual Mode DisplayPort
• 2 year warranty

This DisplayPort Switch allows you to choose between two sources with a simple push of a button. With full support for 4K UHD the switch supports video resolutions up to 3840 x 2160 with multi-channel digital audio.
Easy to install and easy to use, the LINDY DisplayPort Switch is an obvious choice for switching between two DisplayPort sources.

Please Note – Audio may not be supported when using DisplayPort to HDMI adapters.

Package Contents:

1x 2:1 DisplayPort Switch

Cat6a Ethernet cables of the 2 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. Cat6a was developed to achieve maximum distance of 90 meters for full 10-Gigabit network speeds. This robust spec will afford you the extra headroom across your network that Cat6 can not. The 500 Mhz performance is double that of Category 6 and five times the bandwidth capacity of Category 5e. The extra performance is ideal for Power over Ethernet (PoE) and Voice Over Internet Protocol (VoIP) applications where data loss is audibly and visually seen and heard. The latest draft declares a new measurement for Power-Sum Alien Crosstalk to ensure neighboring pairs do not cause disturbance to the other cables. The cable center isolator maintains strict pair separation optimizing NEXT performance. Our Cat6a patch cables are complete end-to-end solution and are tested for compliance with all EIA/TIA-568-C Category 6 specifications. This particular cable is a red UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. Cat6a cable includes a spline and ribbing to help ensure separation between the pairs which limits cross talk. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat6a patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life.

Plenum Security Cable, White, 18/4 (18 AWG 4 Conductor), Stranded, CMP, Spool, 1000 foot

This adapter will convert a 1/4″ stereo connector into a stereo 3.5mm headphone-style jack. The end on this device are a female 1/4″ to 3.5mm male.

This external SCSI adapter is designed to convert an HPDB68 connection into an HPDB50 connection. Converts HPDB68 female to HPDB50 male.

Cat6a White Slim Ethernet Patch Cable, Pure Copper, Snagless Molded Boot, 10 foot

• For use with SAS/SATA HBAs (Host Board Adapters) and external drive housings
• Thumbscrew type SFF-8470 (4x) to latch type SFF-8088 (4x) connectors
• SAS (Serial Attached SCSI) compliant
• Fully compliant with SATA II specifications (Electrical Specifications, section 6.6)
• Full duplex communication up to 3Gb each direction/channel
• Color: Black
• 10 Year warranty

Cat6 Red Copper Ethernet Patch Cable, Clear Finger Boot, POE Compliant, 25 feet