Part No. 10G2-291HD
-
This white 16 AWG (American Wire Gauge) 2 conductor Speaker cable is CM rated for in-wall use, though it need not be used strictly in-wall. It comes in a convenient 100 foot spool and is ideal for wiring the speakers in your home theater or house to your receiver. Each conductor (wire) is composed of 65 0.16 mm strands made from pure copper which provides the optimal conductivity/low resistance to drive high quality audio to your speakers. Our speaker wire is made from pure copper. Some companies use the marketing term oxygen free copper which really means there is no iron oxide in the wire. When oxides of iron are in the copper, the conductivity of the wire reduces due to the higher resistance of the iron oxide. So it is in your best interest to install speaker wire made with pure copper like ours are. Another misnomer is that copper clad aluminum is the same quality as pure copper; this is false. The resistance (Ohms) between the two differ and as resistance in the cable increases the power delivered to the speaker is reduced. The sound will be lower and can lose some of its quality. If copper's conductivity, due to resistance, is rated at 100% then aluminum's conductivity would be rated at 61%. In order to deliver the same quality of sound with aluminum one would need a much larger gauge. -
This 100 foot black SVGA Cable has two HD15 male ends and features ferrite beads, coaxial construction and double shielding. Its primary use is for connecting a computer to a computer monitor for video display. The ferrite beads/cores are small iron oxide alloy cylinders wrapped around the ends of the cable. They are used to suppress EMI/RFI electronic noise on the cable by absorbing the unwanted high frequencies and dissipating them. The coaxial construction and double shielding work to further suppress noise, delivering you the best picture possible. Our SVGA video cables can handle the lowest resolutions used on computer monitors today all the way up to a maximum of 2048 x 1536.Part No. 10H1-201HD -
Our 100 foot 3-Pin XLR Audio Cables are built with high quality XLR connectors and audio cable for maximum signal transfer and RF/EMI noise resistance. The high density shield blocks electrostatic noise, eliminating annoying hum, buzz, radio interference and noise.Part No. 10XR-012HD -
This 100ft Bootless Plenum Cat6 Gray Ethernet Patch Cable is perfect for short runs in buildings or government installations.The plenum rating means that the cable is jacketed in materials which have low toxicity smoke characteristics and fire retardant properties.The Plenum of a building is the area between floors or above office areas for heating/cooling airflow. This cable meets the strictest requirements for any building codes.Part No. 11X8-121HD -
- Distribute 4 HDMI Inputs up to 100m* to 4 HDMI displays
- Extend HDMI, IR**, Ethernet & RS-232 over a single CAT5e/6/7 Cable
- Supports resolutions up to Full HD 1080p @ 60Hz, including Bluray 1080p 3D***
- Controllable via IR, RS-232, Telnet IP & Web GUI
- Supports LPCM, DTS Digital, DTS HD, Dolby Digital & Dolby True HD audio
- Includes HDBaseT PoE functionality to remotely power compatible receivers
- 2 Year Warranty
* CAT5e Maximum distance 80m, CAT6/7 100m
** IR Functionality is only available using No. 38218 C6 HDMI Receiver Premium and No. 38114 C6 HDMI Faceplate Receiver
*** 1080p 3D can only be supported using the TV EDID setting, with a 3D equipped display connected to Output A
The C6 HDMI 4x4 Matrix Premium with HDBaseT Technology supports the transmission of high definition video (resolutions up to 1080p Full HD and 1920×1200@60Hz, including 1080p 3D*), multi-channel digital audio and control via IR, RS-232 or Web GUI/Telnet IP from four high definition sources to four HDBaseT outputs over a single CAT5e (up to 80m) or CAT6/7 cable (up to 100m) for each output. Output A and C have additional mirrored HDMI outputs.
It supports high resolution digital audio formats such as LPCM 7.1 CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio as well as 3D content that can be displayed when connecting a 3DTV and 3D source. Power over Ethernet (PoE) support means that compatible receivers do not need their own separate power supplies, allowing for greater flexibility in installations and the LAN serving function allows devices such as Smart TVs to be connected to the network/internet.
This flexible feature rich product has been designed to be used in a number of different applications, such as:
- Domestic HDMI Matrix system
- Video/TV wall display and control
- Security surveillance and control
- Commercial advertising, display and control
- University Lecture hall display and control
- Retail Sales and demonstration
Part No. 38216 -
- For use C6 HDMI 4x4 Matrix Extender Premium
- Extend HDMI, IR, Ethernet & RS-232 over a single CAT5e/6/7 Cable
- Supports resolutions up to Full HD 1080p @ 60Hz, including Bluray 1080p 3D
- Supports LPCM, DTS Digital, DTS HD, Dolby Digital & Dolby True HD audio
- Includes HDBaseT PoE functionality for remote powering via C6 HDMI 4x4 Matrix Extender Premium
- 2 Year Warranty
The C6 HDMI Receiver Premium with HDBaseT Technology has been designed to work with our C6 HDMI 4x4 Matrix Premium. The C6 Receiver Premium supports the transmission of high definition video (resolutions up to 1080p Full HD and 1920×1200@60Hz, including 1080p 3D), multi-channel digital audio and control via IR and RS-232 over a single CAT5e (up to 80m) or CAT6/7 cable (up to 100m) for each output.
The C6 HDMI Receiver supports high resolution digital audio formats such as LPCM 7.1 CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio as well as 3D content that can be displayed when connecting a 3DTV and 3D source. Power over Ethernet (PoE) support means that the C6 HDMI Receiver Premium does not require its own separate power supply as it receives its power directly from the C6 HDMI Matrix via the HDBaseT connection, allowing for greater flexibility in installations and the LAN serving function allows devices such as Smart TVs to be connected to the network/internet.
This flexible feature rich product has been designed to be used in a number of different applications, such as:
- Domestic HDMI Matrix system
- Video/TV wall display and control
- Security surveillance and control
- Commercial advertising, display and control
- University Lecture hall display and control
- Retail Sales and demonstration
Part No. 38218 -
- Extends digital display signals with absolutely no degradation
- Built-in connector design allows direct connection to source and display
- Supports HDMI resolutions of up to 2160p 30hz
- 3D ready with a Channel bandwidth of 10.2Gbps
- Ideal for home cinema, medical, factory automation, public display installations etc.
- Several different lengths available
- Integrated cable ties can secure the cable to devices, equipment or other cables to prevent it from being accidentally disconnected
- Dimensions: 59.3 x 48 x 25mm (WxDxH)
- 2 year warranty
Part No. 38078 -
100TX to 100FX-SC MM Converter w/PS (power source). Use this 100TX to 100FX SC Converters with PoE Injectors to allow users to connect to different types of network segments to provide an ideal solution for extensive Wireless access point, VoIP Phone, and IP Surveillance System deployments. The product fully complies with the IEEE 802.3af standard. It combines data received over fiber connection with 48VDC electrical power thus easily providing power to a remote PoE device over an existing standard Ethernet unshielded twisted pair cable. Your network devices can thus be installed in more appropriate position for better performance. ?The converter includes PD signature sensing and power monitoring features. ?Other advantages include over-current protection, under-current detection and fault protection input. ?The LFP (Link Fault Pass-through) allows the converter to monitor both the fiber and copper RX ports for loss of signal. ?The FEF (Far End Fault) enables the converter to stop sending link pulse to the link partner once a loss of the fiber RX signal is encountered.Part No. 71F1-301SC -
1080P HDMI Extender over Cat5e/6 with loop out and dual IR -
Use this 10 foot 1/4 inch patch cable to connect a large range of electric or electronic instruments use 1/4 inch mono patch cords to connect the instrument to the amplifier, such as the electric guitar, electric bass, synthesizer, electric piano, or electronic drum machines. Musicians playing electric or electronic instruments often use longer cables (from 10 to 20 feet) between their instrument and their amplifier, and then use shorter patch cords (from a few inches to one or two feet long) to connect chains of effects devices, stomp box pedals, or other signal processors. This cable features a spiral shield for EMI rejection and durable, molded PVC connectors to ensure a lifetime of usage.Part No. 10A1-61110 -
Use this 10 foot 1/4 inch patch cable to connect stereo devices to the amplifier, such as other amplifiers, mixer boards and pre-amps. Sound Engineers setting up a studio or concert venue often use longer cables (from 10 to 20 feet) between their mixers and amplifiers on stage, and then use shorter patch cords (from a few inches to one or two feet long) to connect other devices closer to the main mixer board. This cable features a braided shield for EMI rejection and durable, molded PVC connectors to ensure a lifetime of usage.Part No. 10A1-62110 -
This 10 foot RGBHV video cable features double foil shielding and is designed for professional video setups/displays requiring a 5 BNC connection. RGBHV stands for red, blue, green, horizontal sync and vertical sync.Part No. 10B1-07110
