This Cat5e 75 foot gray crossover cable is used for networking, data transfer and phone lines. For use from a DSL/cable modem directly to the PC and for a direct link from PC to PC. This particular cable is a gray UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.

20m Premium Super Long Distance DVI-D Extension Cable

• High performance hub with active cable that provides an extended 10m connection between a computer and up to 4 USB 3.0 devices
• Can be used standalone or as part of the Lindy Active Extension System Pro to create bespoke extension systems of over 40m (depending on the cable configurations used)
• Supports the full USB 3.0 SuperSpeed bandwidth for speeds of 5Gbps
• Easy to use – connects to the device’s existing USB cable (5m maximum)
• 2 year warranty

 

The Lindy USB Active Extension Hub Pro is a high performance hub with active cable that allows access to four USB 3.0 SuperSpeed peripherals over long distances. With support for data transfer speeds of up to 5Gbps this extension hub is perfect for transferring large data volumes quickly and reliably.

 

This 10m extension hub can be used standalone or as part of the Lindy USB 3.0 Active Extension System Pro. This system is a modular solution that can combine multiple USB Active Extension Pro cables and a USB 3.0 Active Extension Pro hub to distribute USB signals to up to 4 devices at up to about 40m (depending on the cable configurations used).

 

Please note that only the USB 3.0 Active Extension Pro 8m (Nr. 43158) or 15m (Nr. 43229) can be connected directly to your computer. If you are creating an extension using multiple units from the Extension Pro System then the first unit must always be the USB 3.0 Active Extension Pro 8m (Nr. 43158) or 15m (Nr. 43229). Once the first cable has been connected, you can then cascade further cables to achieve a maximum distance of 40m. The final part of the extension can be any of the three parts of the Extension Pro System. If you need to extend multiple devices or if you connect a USB device with high power requirement, then you should use the 10m Hub Pro unit (Nr. 43159) with it’s power supply as the final part of the extension.

 

This cable features industry-proven active technology and locking connectors to ensure full signal integrity in the most demanding environments.

 

Information about USB 3.0, 3.1 & 3.2

 

USB 3.0, USB 3.1 and USB 3.2 PCs, cables and devices are all compatible with each other, when using either a USB Type A or USB Type C host interface.
USB 3.0, USB 3.1 Gen 1 and USB 3.2 Gen 1 all support data transfer rates up to 5 Gbps.
USB 3.1 Gen 2 and USB 3.2 Gen 2 both support data transfer rates up to 10 Gbps.

 

"

Lindy Water-Activated Flashlight

It?s no secret that weather is appearing even more unpredictable today. Addressing natural hazards safely and productively has become an integral responsibility of business and operational management everywhere. Against this backdrop of change and this now widely recognized responsibility, management plans in every sector have begun to see that light itself is often the first thing they?ll need when the unexpected occurs. A trusty light source is now seen to be essential in any emergency-response kit ? at work, at play, or at home. It turns out to be harder than is sounds to make sure that the light you need is ready when you need it. Even the most reliable, mil-spec flashlights often turn up with dead batteries when stored for the unforeseen. How can we be sure that light will be ready-to-hand when there?s no way forward without it?

Our Water-Activated Flashlight

The Connectivity Center offers you the Lindy Water-Activated Flashlight for just this need. With it, you?ll have up to 72 continuous hours of a no-flame/no-spark light source that works even when wet ? even when completely submerged. It contains no toxic elements, so it is safe to use in all environments, and it remains useful for up to 10 years, maintenance-free, stored in its own water-resistant bag. Once activated, the Lindy Water-Activated Flashlight can be turned off by drying the battery module, and it can be reactivated for up to three cycles of use. What?s the connection? Security is what we?re thinking of and working on every day. Securing the integrity of your data systems and access to vital information and connection today is our mission. Because the physical sector of your cyber-security perimeter is our focus, the first thing you would need in the event of a natural disaster or power failure ? light ? was naturally part of our concern.

We Offer More Than Just Water-Activated Flashlights

Giving you the balance between access and security that both defends and enables your operation is our specialty. The Connectivity Center offers thousands of devices and dozens of systems for securing the ports and connectors of your network. The Lindy Water-Activated Flashlight is just one product on our vast portfolio In this age of cybersecurity concerns, our unique perspective is a resource to make sure you have on your side, an asset you should have in your hands. We offer you the best possible vantage point for securing your vital computer data and information systems, because the connection between computers and users has been our focus, ever since access was dispersed to throughout the world?s organizations and enterprises, when computers left their quarantine in the mainframe room. The breadth and depth of this experience is very likely unsurpassed.