Part No. 3502-009
-
DB9 / HD15 (Serial / VGA) Snap on Plastic Hood. Add this DB9/HD15 (serial/VGA) snap-on plastic hood to ensure extra protection to your VGA plug when building your custom VGA cable. This beige-colored plastic hood will add a sturdy layer of protection to your VGA port to help protect the ends of your cables from any damage that may occur - you can be confident that they are secure after installation. Our DB9 snap-on plastic hood includes the necessary hardware for installation and comes with a lifetime product warranty. -
- Allows you to internally attach a Premium Gold cable to our VGA Face Plate
- Post: # 4-40 UNC, 14mm
- Nut: # 4-40 UNC, 5mm
- Each pack contains 10 nuts and 10 posts
Pack of 50 also availablePart No. 66026 -
- Internal Data and power cable
- SATA 7 Pin + 9 Pin Male to SATA 7 Pin + 15 Pin SATA power connector, 0.3m
- 10 Year warranty
Part No. 33636 -
Modular Adapter, Gray, DB25 Male to RJ12Part No. 31D3-36210 -
Modular Adapter, Gray, DB9 Female to RJ12 JackPart No. 31D1-16410 -
Modular Adapter, Gray, DB9 Male to RJ12 JackPart No. 31D1-16210 -
DB25 Female D-Sub Connector, Solder Type. This device is a female solder-type DB25 D-Sub housing and is compatible with any male DB25 connector. This item comes with a lifetime warranty.Part No. 3530-04025 -
DB9 Female D-Sub Connector, Solder Type. This DB9 D-Sub female solder-type connector can be used when constructing your own cable. Will work with any male DB9 contact.Part No. 3530-04009 -
DB25 Male D-Sub Connector, Solder Type. This Male DB25 Solder Type D-Sub Connector comes with its own housing and will work work with any crimp contact.Part No. 3530-01025 -
DB9 Male D-Sub Connector, Solder Type. This male DB9 D-Sub solder-type connector was designed to make your DB9 cable with ease, and without the use of any additional tools.Part No. 3530-01009 -
DB9 Female IDC Ribbon Right Angle Connector 3cps. This DB9 female IDC ribbon crimp connector device comes with a right-angle DB9 female port connector.Part No. 3430-14009 -
DB9 Male IDC Ribbon Right Angle Connector 3pcs. This DB9 Male IDC ribbon is a right-angle connector that is designed to be crimped onto a DB9 cable easily.Part No. 3430-12009 -
DB37 Female Crimp Housing. Use our DB37 female crimp housing and crimp pins (part 3300-004HD not included) to make custom pinned out DB37 female connectors.Part No. 3309-037F -
DB25 Female Serial Crimp Housing. Use our DB25 Female Crimp Housing and crimp pins (part 3300-004HD not included) to make custom pinned out DB25 female connectors and serial cables.Part No. 3309-025F -
DB15 Male Mac / Joystick Crimp Housing. Use our D15 Male Crimp Housing and crimp pins (part 3300-001HD not included) to make custom pinned out D15 Male connectors, and Mac, Midi, or Joystick cables.Part No. 3309-015M -
DB9 Male Serial Crimp Housing. Use our DB9 Male Crimp Housing and crimp pins (part 3300-001HD not included) to make custom pinned out DB9 Male connectors, and serial cables.Part No. 3309-009M -
DB9 Female Serial Crimp Housing. Use our DB9 Female Crimp Housing and crimp pins (part 3300-004HD not included) to make custom pinned out DB9 Female connectors, and serial cables.Part No. 3309-009F -
40 Pin Break Away, Double Row (2x20). These pins are ideal for building your own serial cables. This unit comes with 40 pins and sits in a double row with 20 pins per row.Part No. 3300-10140 -
Modular Adapter, Gray, DB15 Female to RJ45 Female. This unit allows you to configure your own specific pin outs. It will cut down on signal loss and interference.Part No. 32D1-18400 -
D-sub crimp tool Suitable for D-sub contacts and 22-28 AWG butt-connectors Hardened steel construction Cushion-grip handlesPart No. 91D5-50030 -
This gray modular adapter converts from a DB9 female to an RJ45 socket. By its very nature the pin outs are user configurable to match any needs you may have. The leads are "flying leads" to provide you with more leeway when inserting the pins. A modular adapter is typically used to traverse log distances over a 8 conductor phone line / network cable.Part No. 31D1-17400 -
This black modular adapter converts from a DB9 male to an RJ45 socket. By its very nature the pin outs are user configurable to match any needs you may have. The leads are "flying leads" to provide you with more leeway when inserting the pins. A modular adapter is typically used to traverse log distances over a 8 conductor phone line / network cable.Part No. 31D1-1720BK -
This gray modular adapter converts from a DB9 male to an RJ45 socket. By its very nature the pin outs are user configurable to match any needs you may have. The leads are "flying leads" to provide you with more leeway when inserting the pins. A modular adapter is typically used to traverse log distances over a 8 conductor phone line / network cable.Part No. 31D1-17200 -
This gray modular adapter converts from a DB9 female to an RJ12 socket. By its very nature the pin outs are user configurable to match any needs you may have. The leads are "flying leads" to provide you with more leeway when inserting the pins. A modular adapter is typically used to traverse log distances over a phone line.Part No. 31D1-16400 -
These are replacement hex nuts for various computer ports such as a monitor or printer. The nut dimensions are 5.0mm.Part No. 30D1-02440 -
-
-
-
- Post-assembly boots clip-together over cables with RJ-45 connectors already crimped on
-
- For cable diameters up to 6mm
-
- Great for identification at patch panels
Part No. 62247 -
-
- 10 pack
- Crimp type
Part No. 62202 -
- 10 pack
- Crimp Type
Part No. 62201 -
5 packPart No. 62051 -
- 10 pack
Part No. 62050 -
- For use with SAS/eSATA HBAs (Host Board Adapters) and external drive housings
- Latch type SFF-8470 (4x) to eSATA (4x) connectors
- SAS (Serial Attached SCSI) compliant
- Full duplex communication up to 6Gbit/s
- Color: Black
- 10 Year warranty
Part No. 33856 -
- For use with SAS/eSATA HBAs (Host Board Adapters) and external drive housings
- Latch type SFF-8470 (4x) to eSATA (4x) connectors
- SAS (Serial Attached SCSI) compliant
- Full duplex communication up to 6Gbit/s
- Color: Black
- 10 Year warranty
Part No. 33855 -
- For use with SAS/eSATA HBAs (Host Board Adapters) and external drive housings
- Screw type SFF-8470 (4x) to eSATA (4x) connectors
- SAS (Serial Attached SCSI) compliant
- Full duplex communication up to 6Gbit/s
- Color: Black
- 10 Year warranty
Part No. 33851 -
This Micro SATA combination cable allows you to connect an internal SATA hard drive to your PCs internal power and SATA data connections. It consists of a 50cm SATA 7 Pin + 9 Pin Male to a 7 Pin Male data cable and a 15 pin SATA power connector.Part No. 33675 -
- eSATAp Male to eSATA Male + USB Type Mini B Male connector + 1.3mm 5V Mini DC jack
- Supports SATA II speeds of up to 3Gbit/sec
- Supports USB speeds of up to 480Mbps
- Supports 5V DC 500mA from a standard USB port
- Color: Black
- Length: 1m
- 10 Year warranty
Part No. 33655 -
- eSATAp Male to eSATA Male + USB Type Mini B Male connector + 1.3mm 5V Mini DC jack
- Supports SATA II speeds of up to 3Gbit/sec
- Supports USB speeds of up to 480Mbps
- Supports 5V DC 500mA from a standard USB port
- Color: Black
- Length: 0.5m
- 10 Year warranty
Part No. 33654 -
- Internal data and power extension cable
- Connectors: Combined 7 Pin SATA Male Data + 6 Pin Slimline SATA Male Power to 7 SATA Female Data + 6 Pin Slimline SATA Female Power
- 10 Year warranty
Part No. 33650 -
- For use with SAS/SATA HBAs (Host Board Adapters) and external drive housings
- Latch type SFF-8088 (4x) to latch type SFF-8088 (4x) connectors
- SAS (Serial Attached SCSI) compliant
- Fully compliant with SATA II specifications (Electrical Specifications, section 6.6)
- Full duplex communication up to 3Gb each direction/channel
- Color: Black
- 10 Year warranty
Part No. 33643 -
- For use with SAS/SATA HBAs (Host Board Adapters) and external drive housings
- Latch type SFF-8088 (4x) to latch type SFF-8088 (4x) connectors
- SAS (Serial Attached SCSI) compliant
- Fully compliant with SATA II specifications (Electrical Specifications, section 6.6)
- Full duplex communication up to 3Gb each direction/channel
- Color: Black
- 10 Year warranty
Part No. 33641 -
- For use with SAS/SATA HBAs (Host Board Adapters) and external drive housings
- Thumbscrew type SFF-8470 (4x) to latch type SFF-8088 (4x) connectors
- SAS (Serial Attached SCSI) compliant
- Fully compliant with SATA II specifications (Electrical Specifications, section 6.6)
- Full duplex communication up to 3Gb each direction/channel
- Color: Black
- 10 Year warranty
Part No. 33631 -
- Connects a legacy PSU to a newer SATA device
- Supports the connection of modern SSDs, HDDs and Blu-Ray disc drive.
- 5.25" Male Power (LP4) to 15 pin Female SATA Power, 90° angled
- Perfect for DIY PC builders and in-house technical teams
- 10 year warranty
The Lindy Power Adapter Cable is a high-performance adapter, allowing users to connect SATA drive with standard 5.25" (LP4) connectors. Perfect for DIY PC builders and in-house technical teams this adapter cable allows the user to connect a legacy PSU to two newer SATA devices such as a SSD, HDD or Blu-Ray disk drive.
" -
- Connects a legacy PSU to a newer SATA device
- Supports the connection of modern SSDs, HDDs and Blu-Ray disc drive.
- 5.25" Male Power (LP4) to 15 pin Female SATA Power, 90° angled
- Perfect for DIY PC builders and in-house technical teams
- 10 year warranty
The Lindy Power Adapter Cable is a high-performance adapter, allowing users to connect SATA drive with standard 5.25" (LP4) connectors. Perfect for DIY PC builders and in-house technical teams this adapter cable allows the user to connect a legacy PSU to a newer SATA device such as a SSD, HDD or Blu-Ray disk drive.
" -
- Allows you to connect a SATA drive, equipped with a slimline SATA power connector, to your PC's drive controller and power supply
- Combined data & power cable for use with drives which feature a slimline SATA power connector
- Connectors: Combined 7 Pin SATA Male Data + 6 Pin Slimline SATA Male Power to 7 SATA Male Data + 5.25″ Male Power
- 10 Year warranty
Part No. 33609 -
- Allows you to connect a SATA drive equipped with a slimline SATA power connector to your PC's drive controller and power supply
- Combined data & power cable for use with drives which feature a slimline SATA power connector
- Connectors: Combined 7 Pin SATA Male Data + 6 Pin Slimline SATA Male Power to 7 SATA Male Data + 5.25″ Male Power
- 10 Year warranty
Part No. 33607 -
- SATA 1.0a and SATA II compatible
- Features latch type, low profile SATA plugs which lock into place when used with compatible latching controller or device ports
- Can also be used with standard non-latching SATA ports
- 10 year warranty
-
- Allows you to connect an SAS host controller to 4 SATA hard drives
- Connectors: Mini SAS SFF-8087 (Host) to 4 x 7 way SATA latch type connectors (target) and 1 x 8 way sideband connector
- Color: Yellow with black mesh
- Length: 1m
- 10 year warranty
Part No. 33506
