-
Crimp Tool for Simply45 Brand Pass Through UTP & STP(Internal Ground) RJ45 Modular Plugs -
Universal(most brands) RJ45 Crimp Tool for UTP and Internal Ground RJ45 Mod Plugs. -
Cyclops 2 Cable Jacket Stripper. ClamshellPart No. 15010C -
This quality 6-hole or port keystone Decora wall plate insert is an ideal companion to use with Decora keystone wall plates. Our superior wall plate insert is available in a clean, bright white color. This wall plate insert will work with snap-in keystones - however, it should be noted that these wall plate inserts have space restrictions. Keystone jacks that are wider than 18.5 mm are not guaranteed to fit side to side. This product comes with a lifetime warrantee and live support online is always available at CableWholesale.Part No. 302-6D-W -
CableWholesale has the equipment that will make your home theater phenomenal. Our white, blank Decora triple-gang wall plate insert is constructed from high-quality molded plastic that is highly durable and is made to last for the life of your system. This wall plate insert will work with single gang keystone jacks, as well as with any decora wall plate and provides an excellent, reliable foundation for your home theater system. The hardware is included with this wall plate and it meets and exceeds industry standards. It is RoHS compliant and comes with a lifetime warranty.Part No. 302-3D-W -
This single gang mounting bracket is designed for use in homes and/or offices. Designed for use with face plates for low voltage installations such as networking, Home Theater, or other similar audio/video applications. This is easy to install and provides a snug wall mount to screw your wall plate into. The mounting wings adjust to fit 1/4 inch to 1 inch thick drywall.Part No. 3031-11210 -
This dual gang low voltage surface mount box is the final piece to complete your raceway installation. Featuring cut-outs (knockouts) for 3/4 inch, 1 1/4 inch, and/or 1 3/4 inch raceways, you now have the ability to add a pass-through or other faceplate at any point in a raceway run. Simply mount the backplate to the wall and cut out the corresponding pattern for the correct raceway size. Screw the top of the box to the mounting plate with the included screws. With knockouts in both the vertical and horizontal positions, this surface mount box continues the raceway system's fully customizable feature. A sharp blade will make quick work of cutting out the appropriately sized notch for the raceway you are using.Part No. 31R5-200IV -
This dual gang low voltage surface mount box is the final piece to complete your raceway installation. Featuring cut-outs (knockouts) for 3/4 inch, 1 1/4 inch, and/or 1 3/4 inch raceways, you now have the ability to add a pass-through or other faceplate at any point in a raceway run. Simply mount the backplate to the wall and cut out the corresponding pattern for the correct raceway size. Screw the top of the box to the mounting plate with the included screws. With knockouts in both the vertical and horizontal positions, this surface mount box continues the raceway system's fully customizable feature. A sharp blade will make quick work of cutting out the appropriately sized notch for the raceway you are using.Part No. 31R5-200WH -
- Dual Snap-in block
- Supplied in a pack of 4
- Suitable for use with our range of Snap-in Blocks and face plates
- For use with all standard sized keystones (15mm x 20mm)
- 2 year warranty
Please Note: LINDY Snap-in Blocks must be used in conjunction with a LINDY Single Gang Face Plates or Double Gang Face Plates as well as LINDY Keystones.
" -
Ethernet to Single Mode Fiber Optic Converter, RJ45 (100Base-TX) to Fiber-SC (100Base-FX) 20km.The 71F1-112SC SMF SC media converter is able to convert network signals between copper and fiber-optic based networks. The converter provides a 10/100Base-TX RJ-45 port, supports full duplex and half duplex switch connectivity and 10Base-T and 100Base-TX auto-sensing. Used in single-mode with fibre-optic cabling, this can extend a network range up to 20km.
The device features built-in Dip switches for easy converter configuration, which function on the Smart LFP (Link Fault Pass-through), allowing the converter to monitor both the fiber and copper ports for signal loss, as well as converter transmission method, auto-negotiation mode for adjusting copper speed and full & half duplex mode.
The 71F1-112SC is able to operate in temperatures from -10 up to 55 Celsius. The converter can be used as a standalone unit or as a module.
Features- Transfers data from 10/100Base-TX copper to fiber interfaces
- Single-mode fiber with SC connector for transmission of up to 20km
- Built-in LFP (Link Fault Pass-through) (LLCF/LLR) Technology
- IEEE 802.3x Flow Control protects against lost packets for reliable data transmission
- Dip switches for customized configuration
- Supports low-time lag transmission
- Supports the transmission of extra-long packets up to 1.6KB
- -10C to 55C operating temperature range
Part No. 71F1-112SC -
This EZ crimp is a great easy way to make your crimps tight and accurate. The individual wires go all the way through this connector head and allow you to make sure everything is lined up before you crimp down. After you crimp use a cutter or the specifically made crimp tool 92D5-66800 to trim the end.Part No. 202003J -
This EZ crimp is a great easy way to make your crimps tight and accurate. The individual wires go all the way through this connector head and allow you to make sure everything is lined up before you crimp down. After you crimp, use a cutter or the specifically made crimp tool 92D5-66800 to trim the end.Part No. 202010J -
This crimp tool is designed to quickly crimp and cut the wires of the EZ-RJ45 Connector in one simple operation. The ratcheted straight action crimping motion ensures a uniform crimp every cycle. This tool features precision cast crimping dies for superior accuracy. The all-steel frame has a rust-resistant black oxide finish. For use with all EZ-RJ45 Cat5e & Cat6 Connectors.Part No. 100004C -
The EZ-RJPRO Heavy Duty Crimp Tool is designed to make a professional installer's life a little easier. This tool has a built-in wire cutter, which helps ensure correct wire lengths while being assured that every termination will meet FCC specifications. This heavy duty tool is the perfect solution when working with high performance, larger OD cables that are tougher to terminate due to larger wire gauges, thicker, harder insulation on conductors and pair separating splines. For use with all EZ-RJ45 Cat5e & Cat6 connectors.Part No. 100054C -
These are replacement cutting blades for the regular EZ-RJ45 Crimp Tool part 100054C. This pack includes two blades.Part No. 100004BL -
Fiber Distribution Panel Plate with 6 Aqua OM3 LC/UPC Duplex Ports, Multimode -
Fiber Distribution Panel Plate with 6 Blue LC/UPC Duplex Ports, Single Mode -
Fiber Distribution Panel Plate, Blank -
Fiber Distribution Panel Enclosure, Rack Mount, 2RU, 6 Plate/Cassette Openings -
Cat6 White Flat Ethernet Patch Cable, 32 AWG, 1.5 foot -
Cat6 White Flat Ethernet Patch Cable, 32 AWG, 1 foot
-
Cat6 White Flat Ethernet Patch Cable, 32 AWG, 20 foot
-
Cat6 White Flat Ethernet Patch Cable, 32 AWG, 2 foot
-
Cat6 White Flat Ethernet Patch Cable, 32 AWG, 45 foot
-
Cat6 White Flat Ethernet Patch Cable, 32 AWG, 5 foot
-
Gray RJ45 Strain Relief Boots are designed to fit over the end of a Cat5, Cat5e and Cat6 cable to relieve the strain on the connector and to clean up the cosmetics of the cable. These particular boots are sold in bags of 50 pieces.Part No. SR-8P8C-GY -
The next time you need a keystone jack that you can always depend on, you can turn to the professionals at . We offer a Green Cat5e RJ45 Keystone Jack that comes complete with a variety of great benefits. After the simple toolless installation process, you can expect this keystone jack to offer a smooth transition from your Cat5e to 110 type punch down connections. It has several features, including its anti-corrosive gold connectors, thermoplastic ABS housing, pure copper conductors, and more! If you would like more information about this keystone jack from the team at , please give us a call today!Part No. 311-120GR -
Cat6 Keystone Jack, Green, Toolless, RJ45 Female. Having the right equipment to terminate your network cable runs is always important, which is why offers several different types of Cat6 keystone jacks. With our Green Cat6 RJ45 Keystone Jack, you will have everything you need to pull off fast transfer rates in any type of network environment. One of the best features of this keystone jack is that it offers a completely toolless installation. Once you place the plastic cover over your wires your job will be done. You can also use this keystone jack with both gigabit speed and ATM products, as well as several other accessories we offer like surface mount boxes and patch panels. The next time you need a keystone jack for networking, phone lines, or any other type of data transfer, you can rely on the team at . Our Green Cat6 RJ45 Keystone Jack is made with gold connectors and copper conductors for the best signal results, and you can rest easy knowing it won?t corrode over time. For more details about this Unshielded Twisted Pair Cat6 keystone jack, please give us a call today!Part No. 327-120GR -
Green RJ45 Strain Relief Boots are designed to fit over the end of a Cat5, Cat5e and Cat6 cable to relieve the strain on the connector and to clean up the cosmetics of the cable. These particular boots are sold in bags of 50 pieces.Part No. SR-8P8C-GR -
Impact Punch Down Tool, includes 110 Blade. This tool is an integral part of any network installation kit. Used for punching down 110-style Ethernet keystones and patch panels quickly and easily. This impact punch down tool includes a reversible 110 blade with one side for punching and cutting and the other for merely punching.Part No. 91D3-30080 -
This is a straight modular in-line phone line coupler for RJ11 / RJ12. This is for extending a telephone cord and will connect two cords together.Part No. MC-6P6C-ST -
This is a reverse modular in-line phone line coupler for RJ11 / RJ12. This will extend out a telephone cord. Just simply attach to one end and add another cord and you are all set up!Part No. MC-6P6C-RE -
Cat5e Keystone Jack, Ivory, RJ45 Female to 110 Punch Down -
This surface mount phone jack comes with a flat piece of adhesive that enables it to be attached directly to the wall without the need of tools.Part No. 300-66FF -
The Lan Tester Network Cable tester Pin Configuration with Wire Map Results is capable of reading the pin configurations of 10 Base-T Cat5 cables, 10 Base-2 Coax, RJ45/RJ11 modular cables, 356A, TIA-568 A/568B and Token Ring cables by comparing one transmitting end to the corresponding receiving end. It can also test for open circuits, wire shorts and cable continuity. The remote kit can test cables that are on a patch panel or wall plate as well as be able to test cables from a distance.Part No. 30D1-56551 -
The LANID is an essential tool for verifying and troubleshooting local area networks. It is designed for network administrators to quickly diagnose problems during LAN installation and repair. With a simple push of a button, the LANID will display the status of network devices, whether it is running a 10BASE-T or 100BASE-T network. Furthermore, the LANID is also equipped with a Portfinder function to quickly identify the corresponding port location on the Switch/Hub. The compact design provides the user with optimum convenience and portability.Part No. 31D3-56655 -
This LANTest Pro Network Tester with Tone Tracing Probe is a compact, hand-held tester that will quickly read the status of twisted-pair Ethernet cables. This device will test for faults such as shorts, open circuits, crossed pairs, reversed pairs and split pairs in a matter of seconds. The tone generator function allows the tester to send a signal through your cable installation while the probe traces the cable and locates the cable fault.Part No. 31D1-56652 -
Easily read the correct pin configuration of 10Base-T cable, 10Base-2 cable, RJ45/RJ11 modular cables, 258A, TIA-568A/568B and Token Ring cable. The remote kit allows for testing longer cable runs and/or wall plates or patch panels. Verify cable continuity, open, short and cross-connect with pair indicator. PoE test function is as simple as connecting the PoE jack to an active network, the PoE indicator lights up when it detects the voltage from the existing network. It can identify the type of PSE simultaneously.Part No. 30D1-56651 -
The LANtest Pro is a small hand-held cable tester, which enables network professionals to quickly and easily verify the integrity of Ethernet twisted pair cables. In one step, the LANtest Pro will test twisted pair cables for open pairs, shorted pairs, reversed pairs, crossed pairs and split pairs. Just push the TEST button, and the LANtest Pro will automatically scan for any existing faults in your cable. The specially designed remote terminator is provided for one-person testing of installed cables. Features -Tests for wiring faults of open, short, reversal, crossed and split pairs -Split pair fault detection at minimum 40cm cable length -Verification of shield integrity -Specially designed remote units that enables one person to test installed cables -Easy to read fault display and high speed testing -Debug mode and detailed fault identification results -Auto sleep mode and power off switch to decrease power -Low battery indicatorPart No. 31D3-56652 -
- 1000Base-T (copper) to 1000Base-SX/LX (fiber)
- Standards: IEEE 802.3, 802.3u, 802.3x
- Connectors: LC (fiber), RJ-45 (copper)
- fiber Type: Multi-mode
- Maximum fiber cable distance - 550m using 50/125µm multi-mode cable, 220m using 62.5/125µm multi-mode cable
- Network data transfer rate: 2000Mbps (Full-duplex)
- Auto MDI-X support for RJ-45 port connection
- Status LED for Speed, Link/Activity, Full-duplex, Power
- External power supply 5V DC, 2A
- Dimensions: 74 x 102 x 22mm (WxDxH)
-
Keystone Wall Plate, Lite Almond, 1 Port, Single Gang -
Keystone Wall Plate, Lite Almond, 2 Port, Single Gang -
Keystone Wall Plate, Lite Almond, 3 Port, Single Gang -
Keystone Wall Plate, Lite Almond, 4 Port, Single Gang -
Keystone Wall Plate, Lite Almond, 6 Port, Single Gang -
- Accommodates 6 face plate modules
- Supplied with 4 x blank face plate modules
- Flip up cover with identification label
- Suitable for surface mounting
- Multiple cable entries
- Dimensions: 170 x 205 x 55mm (WxDxH)
- Color: White
- Warranty: 2 years
Note: picture shown for illustration only, the shown modules are not included.Part No. 60549 -
Crimping Tool for RJ11 / RJ12 / RJ45. This device is used to crimp RJ11 / RJ12 phone connectors and RJ45 Ethernet connectors onto cables. Works with Part Numbers: 31D0-500HD, 31D0-510HD, 31D0-52050, 31D0-520HD, 31D0-51007, 31D0-58007, 31D0-6P4CS, 31D0-580HD and 31D0-6P6CF.Part No. 91D5-56800 -
- Full CAT5e specification with moulded boots
- Gigabit ready
- 100% performance tested
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- Useful for Color coding your departments, workgroups, etc.
- Crossover cables, generally used for hub to hub connection, are instantly recognisable with their contrasting cable and boot Colors
- Foil Twisted-Pair (FTP) - the extra foil shielding protects against Electro Magnetic Interference (EMI) and Radio Frequency Interference (RFI)
- 10 year warranty
Pinout:1 ---- 32 ---- 63 ---- 14 ---- 75 ---- 86 ---- 27 ---- 48 ---- 5Part No. 44301 -
- Full CAT5e specification with moulded boots
- Gigabit ready
- 100% performance tested
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- Useful for Color coding your departments, workgroups, etc.
- Crossover cables, generally used for hub to hub connection, are instantly recognisable with their contrasting cable and boot Colors
- Foil Twisted-Pair (FTP) - the extra foil shielding protects against Electro Magnetic Interference (EMI) and Radio Frequency Interference (RFI)
- 10 year warranty
Pinout:1 ---- 32 ---- 63 ---- 14 ---- 75 ---- 86 ---- 27 ---- 48 ---- 5Part No. 44302 -
- Full CAT5e specification with moulded boots
- Gigabit ready
- 100% performance tested
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- Useful for Color coding your departments, workgroups, etc.
- Crossover cables, generally used for hub to hub connection, are instantly recognisable with their contrasting cable and boot Colors
- Foil Twisted-Pair (FTP) - the extra foil shielding protects against Electro Magnetic Interference (EMI) and Radio Frequency Interference (RFI)
- 10 year warranty
Part No. 44309 -
- Full CAT5e specification with moulded boots
- Gigabit ready
- 100% performance tested
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- Useful for Color coding your departments, workgroups, etc.
- Crossover cables are generally used for hub to hub connections and are instantly recognisable with their contrasting cable and boot Colors
- 10 year warranty
Part No. 44747 -
- Full CAT5e specification with moulded boots
- Gigabit ready
- 100% performance tested
- Ideal for connecting computers, hubs, switches, print servers, patch panels, etc.
- Useful for Color coding your departments, workgroups, etc.
- Crossover cables are generally used for hub to hub connections and are instantly recognisable with their contrasting cable and boot Colors
- 10 year warranty
Part No. 44745 -
This network cable tester is designed to quickly and accuratly test some of the most popular network wire set-ups such as 258A, which is the eight-wire system specifid by bAT&T networks as well as being the 10Base-T standard.Part No. 31D3-51450 -
USB 2.0 Type A Male to RJ45 Male 8P8C Flat Console Cable, Periwinkle Blue, 6 Foot -
NeverDull 110 Punchdown Blade. ClamshellPart No. 13032C -
Cat5e Keystone Jack, Orange, RJ45 Female to 110 Punch Down -
Orange RJ45 Strain Relief Boots are designed to fit over the end of a Cat5, Cat5e and Cat6 cable to relieve the strain on the connector and to clean up the cosmetics of the cable. These particular boots are sold in bags of 50 pieces.Part No. SR-8P8C-OR -
Parallel Print Server, 1 Parallel Port, One 10/100 Fast Ethernet RJ45 Port. The 74X5-04112 print server is an ideal network printing solution for small offices, home offices, schools and other businesses that require printer sharing over the same network. This print server is equipped with a 10/100Mbps autosensing Ethernet port and a DB-36-pin male bi-directional Centronic port that connects to parallel printers.Part No. 74X5-04112 -
Screws, spacers, bolts, nuts and jumpers for PC installation personnelPart No. 66050 -
This convenient adapter allows you to plug two phones into one phone jack. Also great for having a phone and a fax machine in the same area, where only one jack is available.Part No. PA-6P6C-ST -
This convenient adapter allows you to plug two phones into one phone jack. Also great for having a phone and a fax machine in the same area where only one jack is available.Part No. PA-6P4C-ST -
These RJ22 4P4C Crimp Connectors are for flat telephone cables and come in bags of 100 pieces. The color is clear.Part No. 31D0-440HD -
These Platinum Tools 5" Side Cutting Pliers are designed for cutting copper wire or trimming leads with full flush cutting blades. These pliers will cut copper wire and soft metals up to 16 AWG.Part No. 10531C -
This Platinum Tools BR1 Multi-Stripper is adjustable for stripping multiple cables, such as twisted Pair (Data) PVC & Plenum: Cat5e shielded; Cat6; Cat6 shielded; Cat6A shielded. Comes in clamshell packaging.Part No. 15041C -
Platinum Tools ezEX44-RJ45 crimp plugs for Cat6 feature a Hi-Lo stagger to isolate each conductor. Simple to use one piece connectors with a pass through design allow conductors to feed through the front end of the connector and be cut flush when the crimp is completed. Crimp tool [part]100061C[/part] is required for this connector. This product comes in a plastic tub with 100 pieces. This product is RoHS2 and UL compliant Max OD of cable: 0.290" (7.36mm) Insulation diameter (conductor) size range: 0.039" - 0.044"(0.99 - 1.12mm)Part No. 202044J -
This Platinum Tools Double Ended Coaxial Stripper will strip a broad range of coax cables in a single step.Part No. 15020C -
These Platinum Tools Electrician's Scissors are designed for cutting through foil and wire, and can even cut through Kevlar. These scissors will cut solid wire up to 16 AWG, and stranded wire up to 12 AWG. These scissors also feature stripping notches for 19 & 23 AWG wire.Part No. 10517C -
Two pack of replacement blades specifically for the EXO-EX Die([part]100061C[/part]). A sharp blade assures your tool will neatly trim the wire from the ends of the connectors for crisp, clean crimps every time. Always have a spare on hand.Part No. 100071BL -
Platinum Tools patented EXO-EX Die is used with the EXO Crimp Frame([part]100061C[/part]) to terminate ezEX-RJ45 connectors (typically used in Cat6 and Cat6a). The EXO-EX Die is interchangeable and reversible when used with EXO Crimp Frame. Designed for the new ezEX-RJ45 connectors (ezEX44 and ezEX48). The ezEX-RJ45 connectors are an RJ45 pass through connector, developed for larger cables and conductors. Integrated Hi-Lo stagger for improved performance and one piece design pass through system.Part No. 100071C -
Platinum Tools EXO-RJ45 Ethernet Crimp ToolPart No. 100061C -
The Platinum Tools EZ-RJ45 is a great easy way to make your crimps tight and accurate. The individual wires go all the way through this connector head and allow you to make sure everything is lined up before you crimp down. Specifically made to work with crimp tool 92D5-66800 or the EXO crimp tool frame with the EZ-RJ45 die part number [part]100072C[/part].Part No. 100003C -
The Platinum Tools EZ-RJ45 cat6 crimp connectors are a great easy way to make your crimps are tight and accurate. The individual wires go all the way through this connector head and allow you to make sure everything is lined up before you crimp down. Specifically made to work with crimp tool [part]100054C[/part] or the EXO crimp tool frame with the EZ-RJ45 die part number [part]100072C[/part]. Details- Max Cable Outer Diameter: 0.275” (6.98mm)
- Max Insulation Diameter (Conductors): 0.040” (1.016mm)
- Meets ANSI/EIA/TIA/TAA specifications
- Solid or Stranded, 24 – 23 AWG
- UL Listed and RoHS/FCC compliant
- 50 micron gold plated contacts
- Color: Clear/Transparent
- Made in USA
Part No. 100009C -
The Platinum Tools EZ-RJ45 cat5e crimp connectors are a great easy way to make your crimps tight and accurate. The individual wires go all the way through this connector head and allow you to make sure everything is lined up before you crimp down. Specifically made to work with crimp tool [part]100054C[/part] or the EXO crimp tool frame with the EZ-RJ45 die part number [part]100072C[/part].Part No. 100010C -
The Platinum Tools EZ-RJ45 cat6 crimp connectors are a great easy way to make your crimps are tight and accurate. The individual wires go all the way through this connector head and allow you to make sure everything is lined up before you crimp down. Specifically made to work with crimp tool [part]100054C[/part] or the EXO crimp tool frame with the EZ-RJ45 die part number [part]100072C[/part]. Details- Max Cable Outer Diameter: 0.275” (6.98mm)
- Max Insulation Diameter (Conductors): 0.040” (1.016mm)
- Meets ANSI/EIA/TIA/TAA specifications
- Solid or Stranded, 24 – 23 AWG
- UL Listed and RoHS/FCC compliant
- 50 micron gold plated contacts
- Color: Clear/Transparent
- Made in USA
Part No. 105004 -
The innovative Snag Proof Strain Relief is designed specifically to be crimped with the EZ-RJ45 plugs. The primary strain relief of the plug locks the snag proof strain relief in place so they will not pull off, creating one, integral assembly. Once crimped, this design allows the plug's primary strain relief to relax slightly, preventing the cable pairs from being over compressed. This decrease in stress contributes to achieving peak performance. The tab on the strain relief is designed to extend over the plug's locking tab, making it snag proof when administering patch cords.Part No. 202036J -
This EZ crimp is a great easy way to make your crimps tight and accurate. The individual wires go all the way through this connector head and allow you to make sure everything is lined up before you crimp down. After you crimp, use a cutter or the specifically made crimp tool [part]100054C[/part] to trim the end. The innovative Snag Proof Strain Relief is designed specifically to be crimped with the EZ-RJ45 plugs. The primary strain relief of the plug locks the snag proof strain relief in place so they will not pull off, creating one, integral assembly. Once crimped, this design allows the plug's primary strain relief to relax slightly, preventing the cable pairs from being over compressed. This decrease in stress contributes to achieving peak performance. The tab on the strain relief is designed to extend over the plug's locking tab, making it snag proof when administering patch cords.Part No. 202016J -
Replacement blade specifically for the EZ-RJ45 Die. A sharp blade assures your tool will neatly trim the wire from the ends of the connectors for crisp, clean crimps every time. Always have a spare on hand.Part No. 100072BL -
Platinum Tools EZ-RJ45 shielded Cat6/5e crimp plugs feature an external ground simplify twisted pair terminations by allowing the wires to be inserted through the connector and out the front, to easily verify the proper wiring order. Pulling the connector down over the cable jacket and seating it tightly in the rear of the connector optimizes electrical performance of the termination. Reducing the distance between the wire twists and contacts also improves performance. Terminate with the patented EZ-RJ45 Crimp Tools - crimp and trim in one cycle.Part No. 202022J -
Platinum Tools EZ-RJ45 shielded Cat6/5e crimp plugs feature an internal ground simplify twisted pair terminations by allowing the wires to be inserted through the connector and out the front, to easily verify the proper wiring order. Pulling the connector down over the cable jacket and seating it tightly in the rear of the connector optimizes electrical performance of the termination. Reducing the distance between the wire twists and contacts also improves performance. Terminate with the patented EZ-RJ45 Crimp Tools - crimp and trim in one cycle.Part No. 202020J -
The EZ-RJ45 fully shielded plug, with an internal ground, combines the performance advantage exclusive to the EZ-RJ45 design with the performance advantage inherent to shielded products. EZ-RJ45 design allows the wires to pass through the connector so the twists in each pair can be pulled closer to the contacts than conventional plugs.Part No. 100021C -
These EZ-RJ45 shielded Cat6 crimp plugs will help you crimp your own Cat6 cable with ease. They include an external ground for applications where copper tape or soldering is not desired and/or possible. These only work with EZ crimp tools like Part #100054C and #100004C. These plugs come in a bag of 100 pieces. Details- For use with CAT5e/6+ shielded cable
- For solid round or stranded wire cables.
- Max Cable OD: 7.11mm (0.280")
- Max Insulated wire OD: 1.016mm (0.040")
- UL Rated, FCC compliant
- TAA Compliant
Part No. 105022 -
These EZ-RJ45 shielded Cat6 crimp plugs will help you crimp your own Cat6 cable with ease. They feature an internal ground for a seamless result. These only work with EZ crimp tools like Part #100054C and #100004C. These plugs come in a bag of 100 pieces. Some shielded Cat6 cables may have an outside diameter large enough to require cutting off the shielding and grounding with the drain wire. In such cases mind the position of the leaf springs on the back side of the connector with respect to the positioning of the drain wire. Details- EZ-RJ45® design allows the wires to pass through the connector so the twists in each pair can be pulled closer to the contacts than conventional plugs.
- Maintaining the twists to the point of termination significantly decreases crosstalk and markedly increases performance.
- Fully shielded products provide reduced pair-to-pair crosstalk, alien crosstalk, and considerably improved immunity to noise at all frequencies.
- Substantially improve noise immunity at all frequencies, especially above 30 MHz when cable balance starts to significantly degrade.
- Category 6 performance per EIA/TIA B.2. FCC compliant, UL rated. RoHS compliant
- Max Cable OD: 6.60mm (0.260"), Max Insulated wire OD: 1.016mm (0.040")
- For solid round or stranded wire cables.
- Made in the USA
- TAA Compliant
Part No. 105020 -
The Original EZ-RJ45 shielded CAT5/6 connector simplifies twisted pair terminations by allowing the wires to be inserted through the connector and out the front for EZ verification of wiring sequence. Applications with RF problems or grounding requirements usually specify to use shielded cable and shielded connectors.Part No. 100023C -
Platinum Tools ezEX-RJ45 shielded connectors with external ground feature a Hi-Lo stagger to isolate each conductor. A simple to use one-piece design. For use with Cat5e and Cat6 cable. These connectors allow the conductors to pass through the front of the connector and must be used in conjunction with crimp tool [part]100061C[/part]. This product comes in a plastic tub and contains 50 pieces. This product is RoHS2 and UL compliant Max OD of cable: 0.305" (7.74mm) Insulation diameter (conductor) size range: 0.039" - 0.044" (1.0 - 1.12 mm)Part No. 202051J -
Platinum Tools ezEX-RJ45 shielded connectors with external ground feature a Hi-Lo stagger to isolate each connector. A simple to use one-piece design. For use with Cat6a cable. These connectors allow the conductors to pass through the front of the connector and must be used in conjunction with crimp tool [part]100061C[/part]. This product comes in a 100 piece bag. This product is RoHS2 and UL compliant Details- Hi-Lo stagger to isolate each conductor
- Simple one piece/pass through design, no bars or liners
- Shielded 6/6A compliant
- Insulation Diameter (Conductor) - Size range: 0.043” – 0.048” (1.09 –1.22mm)
- Max Outer Diameter: 0.305” (7.75mm)
- Solid or Stranded 23-22 AWG
- 50 micron gold plated contacts
- TAA, TIA, RoHS, UL & FCC compliant
- Made in the USA
Part No. 105029 -
This shielded ezEX-RJ45 connector is designed for larger cables and conductors. Features a unique integrated Hi-Lo stagger load bar and allows 'big' conductors to pass through the front end of the connector making it easy to verify the wiring sequence before terminating. This connector is typically used with Cat6 and is terminated with EXO Crimp Frame and EXO-EX Die ([part]100061C[/part]). Details- Hi-Lo stagger to isolate each conductor
- Simple one piece/pass through design, no bars or liners
- Shielded 5e/6/6A compliant
- Insulation Diameter (Conductor) - Size range: 0.039” – 0.044” (1.0 –1.12mm)
- Max Outer Diameter: 0.305” (7.75mm)
- 50 micron gold plated contacts
- Solid or Stranded 24-22 AWG
- TAA, TIA, RoHS, UL & FCC compliant
- Made in the USA
Part No. 105028 -
Platinum Tools ezEX-RJ45 shielded connectors with internal ground feature a Hi-Lo stagger to isolate each connector. A simple to use one-piece design. For use with Cat5e and Cat6 cable. These connectors allow the conductors to pass through the front of the connector and must be used in conjunction with crimp tool [part]100061C[/part] This product comes in a plastic tub and contains 50 pieces. This product is RoHS2 and UL compliant Max OD of cable: 0.280"(7.1mm) Insulation diameter (conductor) size range: 0.039" - 0.044" (0.99 - 1.12mm)Part No. 202050J -
This RJ45 connector is designed for larger cables and conductors. Features a unique integrated Hi-Lo stagger load bar and allows 'big' conductors to pass through the front end of the connector making it easy to verify the wiring sequence before terminating. This connector is typically used with Cat6 and is terminated with EXO Crimp Frame and EXO-EX Die ([part]100061C[/part]).Part No. 100028C -
Get your cables together the quick and professional way with Platinum Tools Heavy Duty Cable Tie Gun. This tool works with both standard and heavy duty cable ties, giving you a tailored look every time. Comes in clamshell packaging.Part No. 10200C -
The LANSeeker Cable Tester is a fast, rugged cable tester and tone generator in one unit. It displays cable test results using LED indicators on the main and remote unit. The LANSeeker Tester is an easy-to-use professional grade tool. When the unit senses a connection between the main and remote unit. the battery-saving auto-on feature initiates test results within 2 seconds. The tester automatically powers off within 5 seconds of the cable being disconnected. LANSeeker tests for shorts, opens, miswires, reversals, and split pairs and can display connection and fault information on a pair-by-pair basis. It also generates audio tones for use with tone tracers on all pairs. Made in the USAPart No. TP500C -
This Platinum Tools PRO 6-in-1 Screwdriver is designed to be used for extended periods of time without causing hand fatigue. Multiple bits: Phillips: 1,2, Slotted: 3/16, Nut Drivers 1/4.Part No. 19002C -
This Platinum Tools Pro Drywall Saw has teeth that are precision ground for fast and effortless cutting in both directions, push and pull. This saw is ideal for cutting drywall, plaster board, plastic paneling, plywood, wallboard and ceiling tile.Part No. 10711C -
Platinum Tools PRO Universal Crimp Tool -
Ideal for electrical, telephone and datacom projects and applications. These scissors easily cut 12 AWG stranded wire, 16 AWG solid wire, and kevlar such as that found in fiber optic cable. The blade is notched for stripping 19 to 23 AWG wire and features a serrated edge for cleaning binding posts and wire.Part No. 10525C -
This Platinum Tools ProStrip 10/20 Wire Stripper is color-coded for quick identification and delivers reliable results. The tools can be used left or right handed - wire sizes are marked on both sides. Curved cutting blades ensure cleaner, precise cuts. Comes in clamshell packaging.Part No. 15003C -
This Platinum Tools ProStrip 16/30 Wire Stripper will cut and strip 16-30 AWG solid and 18-32 AWG stranded, as well as cutting and chasing threads on a 16/32 & 8/32 bolt.Part No. 15005C
The Connectivity Center is a supplier of some of the leading physical cybersecurity technologies and physical data security products. We pride ourselves in quality, value, variety, and versatility. We want to be a one-stop shop for most of your physical cybersecurity needs, and we love to serve our partners in this evolving industry.
ACCOUNT
RESOURCES
INFO
The Connectivity Center is committed to ensuring that its website is accessible to people with disabilities. We strive to have all pages on our website meet W3C Web Content Accessibility Guidelines 2.0, Level AA conformance. Any issues should be reported to mail@connectivitycenter.com.
Copyright © 2012 –    |   The Connectivity Center   |   All Rights Reserved   |   Powered by LeadWorks
