web analytics
888.865.4639|info@connectivitycenter.com
  •

    Platinum Tools EZ-RJ45 Cat6 crimp Plugs 500 pieces

    $513.95 105004
    The Platinum Tools EZ-RJ45 cat6 crimp connectors are a great easy way to make your crimps are tight and accurate. The individual wires go all the way through this connector head and allow you to make sure everything is lined up before you crimp down. Specifically made to work with crimp tool [part]100054C[/part] or the EXO crimp tool frame with the EZ-RJ45 die part number [part]100072C[/part]. Details
    • Max Cable Outer Diameter: 0.275” (6.98mm)
    • Max Insulation Diameter (Conductors): 0.040” (1.016mm)
    • Meets ANSI/EIA/TIA/TAA specifications
    • Solid or Stranded, 24 – 23 AWG
    • UL Listed and RoHS/FCC compliant
    • 50 micron gold plated contacts
    • Color: Clear/Transparent
    • Made in USA
    Part No. 105004
    Add to cart Details Quick View

  • Platinum Tools EZ-RJ45 Shielded Cat6 Crimp Plugs, 100 Pieces

    $233.95 105020
    These EZ-RJ45 shielded Cat6 crimp plugs will help you crimp your own Cat6 cable with ease. They feature an internal ground for a seamless result. These only work with EZ crimp tools like Part #100054C and #100004C. These plugs come in a bag of 100 pieces. Some shielded Cat6 cables may have an outside diameter large enough to require cutting off the shielding and grounding with the drain wire. In such cases mind the position of the leaf springs on the back side of the connector with respect to the positioning of the drain wire. Details
    • EZ-RJ45® design allows the wires to pass through the connector so the twists in each pair can be pulled closer to the contacts than conventional plugs.
    • Maintaining the twists to the point of termination significantly decreases crosstalk and markedly increases performance.
    • Fully shielded products provide reduced pair-to-pair crosstalk, alien crosstalk, and considerably improved immunity to noise at all frequencies.
    • Substantially improve noise immunity at all frequencies, especially above 30 MHz when cable balance starts to significantly degrade.
    • Category 6 performance per EIA/TIA B.2. FCC compliant, UL rated. RoHS compliant
    • Max Cable OD: 6.60mm (0.260"), Max Insulated wire OD: 1.016mm (0.040")
    • For solid round or stranded wire cables.
    • Made in the USA
    • TAA Compliant
    Part No. 105020
    Add to cart Details Quick View

  • Platinum Tools EZ-RJ45 Shielded Cat6 Crimp Plugs, 100 Pieces

    $269.95 105022
    These EZ-RJ45 shielded Cat6 crimp plugs will help you crimp your own Cat6 cable with ease. They include an external ground for applications where copper tape or soldering is not desired and/or possible. These only work with EZ crimp tools like Part #100054C and #100004C. These plugs come in a bag of 100 pieces. Details
    • For use with CAT5e/6+ shielded cable
    • For solid round or stranded wire cables.
    • Max Cable OD: 7.11mm (0.280")
    • Max Insulated wire OD: 1.016mm (0.040")
    • UL Rated, FCC compliant
    • TAA Compliant
    Part No. 105022
    Add to cart Details Quick View

  • Platinum Tools ezEX-RJ45 Shielded Cat5e/6 Crimp Plugs

    $318.95 105028
    This shielded ezEX-RJ45 connector is designed for larger cables and conductors. Features a unique integrated Hi-Lo stagger load bar and allows 'big' conductors to pass through the front end of the connector making it easy to verify the wiring sequence before terminating. This connector is typically used with Cat6 and is terminated with EXO Crimp Frame and EXO-EX Die ([part]100061C[/part]). Details
    • Hi-Lo stagger to isolate each conductor
    • Simple one piece/pass through design, no bars or liners
    • Shielded 5e/6/6A compliant
    • Insulation Diameter (Conductor) - Size range: 0.039” – 0.044” (1.0 –1.12mm)
    • Max Outer Diameter: 0.305” (7.75mm)
    • 50 micron gold plated contacts
    • Solid or Stranded 24-22 AWG
    • TAA, TIA, RoHS, UL & FCC compliant
    • Made in the USA
    Part No. 105028
    Add to cart Details Quick View

  • Platinum Tools ezEX-RJ45 Cat6a Shielded Ext Ground 100 piece

    $406.95 105029
    Platinum Tools ezEX-RJ45 shielded connectors with external ground feature a Hi-Lo stagger to isolate each connector. A simple to use one-piece design. For use with Cat6a cable. These connectors allow the conductors to pass through the front of the connector and must be used in conjunction with crimp tool [part]100061C[/part]. This product comes in a 100 piece bag. This product is RoHS2 and UL compliant Details
    • Hi-Lo stagger to isolate each conductor
    • Simple one piece/pass through design, no bars or liners
    • Shielded 6/6A compliant
    • Insulation Diameter (Conductor) - Size range: 0.043” – 0.048” (1.09 –1.22mm)
    • Max Outer Diameter: 0.305” (7.75mm)
    • Solid or Stranded 23-22 AWG
    • 50 micron gold plated contacts
    • TAA, TIA, RoHS, UL & FCC compliant
    • Made in the USA
    Part No. 105029
    Add to cart Details Quick View

  • RJ22 Phone/Data Crimp Connectors, 4P4C, Flat Cable, 500 pcs

    $46.95 106100
    Platinum Tools Phone / Data RJ22 Crimp Connectors for Flat Cable, 4P4C, 500 pieces
    Part No. 106100
    Add to cart Details Quick View

  • Platinum Tools RJ45 Cat6a Shielded Connector for Solid Cable

    $198.95 106190
    Platinum Tools shielded Cat6a RJ45 Crimp Connectors are designed for use with solid shielded Cat6a cable. So when you are ready to deploy a shielded 10 Gigabit network or merely the infrastructure for one look no further. These connectors are composed of two pieces, the RJ45 modular plug and a wire guide insert which helps keep the individual conductors in the appropriate alignment. Please be advised that this connector is only compatible with the Platinum Tools Tele-TitanXg and Tele-TitanXg 2.0 Crimp Tool. Details
    • Max cable OD: 8.5mm/0.335"
    • Max conductor OD: 1.35mm/0.053"
    • Individual conductor OD range: 0.042” - 0.053” (1.07mm-1.35mm)
    • Wire gauge range (AWG) 24—22
    • Designed for both shielded and unshielded cabling
    • 50µ Gold Contacts
    • UL and RoHS compliant
    Part No. 106190
    Add to cart Details Quick View

  • Platinum Tools EZ-RJ45 cat5e Crimp Plugs 50 pieces

    $48.95 100003C
    The Platinum Tools EZ-RJ45 is a great easy way to make your crimps tight and accurate. The individual wires go all the way through this connector head and allow you to make sure everything is lined up before you crimp down. Specifically made to work with crimp tool 92D5-66800 or the EXO crimp tool frame with the EZ-RJ45 die part number [part]100072C[/part].
    Part No. 100003C
    Add to cart Details Quick View

  • Platinum Tools EZ-RJ45 Cat6 crimp Plugs 10 pieces

    $14.95 100009C
    The Platinum Tools EZ-RJ45 cat6 crimp connectors are a great easy way to make your crimps are tight and accurate. The individual wires go all the way through this connector head and allow you to make sure everything is lined up before you crimp down. Specifically made to work with crimp tool [part]100054C[/part] or the EXO crimp tool frame with the EZ-RJ45 die part number [part]100072C[/part]. Details
    • Max Cable Outer Diameter: 0.275” (6.98mm)
    • Max Insulation Diameter (Conductors): 0.040” (1.016mm)
    • Meets ANSI/EIA/TIA/TAA specifications
    • Solid or Stranded, 24 – 23 AWG
    • UL Listed and RoHS/FCC compliant
    • 50 micron gold plated contacts
    • Color: Clear/Transparent
    • Made in USA
    Part No. 100009C
    Add to cart Details Quick View

  • Platinum Tools EZ-RJ45 cat6 crimp Plugs 50 pieces

    $53.95 100010C
    The Platinum Tools EZ-RJ45 cat5e crimp connectors are a great easy way to make your crimps tight and accurate. The individual wires go all the way through this connector head and allow you to make sure everything is lined up before you crimp down. Specifically made to work with crimp tool [part]100054C[/part] or the EXO crimp tool frame with the EZ-RJ45 die part number [part]100072C[/part].
    Part No. 100010C
    Add to cart Details Quick View

  • Platinum Tools EZ-RJ45 Shielded Cat6 Crimp Plugs

    $27.95 100021C
    The EZ-RJ45 fully shielded plug, with an internal ground, combines the performance advantage exclusive to the EZ-RJ45 design with the performance advantage inherent to shielded products. EZ-RJ45 design allows the wires to pass through the connector so the twists in each pair can be pulled closer to the contacts than conventional plugs.
    Part No. 100021C
    Add to cart Details Quick View

  • Platinum Tools EZ-RJ45 Shielded Cat65e Crimp Plugs

    $32.95 100023C
    The Original EZ-RJ45 shielded CAT5/6 connector simplifies twisted pair terminations by allowing the wires to be inserted through the connector and out the front for EZ verification of wiring sequence. Applications with RF problems or grounding requirements usually specify to use shielded cable and shielded connectors.
    Part No. 100023C
    Add to cart Details Quick View

  • Platinum Tools ezEX44-RJ45 Cat5e/6 Crimp Plugs

    $53.95 100028C
    This RJ45 connector is designed for larger cables and conductors. Features a unique integrated Hi-Lo stagger load bar and allows 'big' conductors to pass through the front end of the connector making it easy to verify the wiring sequence before terminating. This connector is typically used with Cat6 and is terminated with EXO Crimp Frame and EXO-EX Die ([part]100061C[/part]).
    Part No. 100028C
    Add to cart Details Quick View

  • RJ22 Phone/Data Crimp Connectors, 4P4C, Flat Cable, 100 pcs

    $14.95 106103J
    Platinum Tools Phone / Data RJ22 Crimp Connectors for Flat Cable, 4P4C, 100 Pieces/Jar
    Part No. 106103J
    Add to cart Details Quick View

  • EZ-RJ45 Cat5e Crimp Plugs 100 Pieces

    $93.95 202003J
    This EZ crimp is a great easy way to make your crimps tight and accurate. The individual wires go all the way through this connector head and allow you to make sure everything is lined up before you crimp down. After you crimp use a cutter or the specifically made crimp tool 92D5-66800 to trim the end.
    Part No. 202003J
    Add to cart Details Quick View

  • EZ-RJ45 Cat6 Crimp Plugs 100 Pieces

    $105.95 202010J
    This EZ crimp is a great easy way to make your crimps tight and accurate. The individual wires go all the way through this connector head and allow you to make sure everything is lined up before you crimp down. After you crimp, use a cutter or the specifically made crimp tool 92D5-66800 to trim the end.
    Part No. 202010J
    Add to cart Details Quick View

  • Platinum Tools EZ-RJ45 Cat6/5e 50/50 Combo, Jar of 50 and 50

    $79.95 202016J
    This EZ crimp is a great easy way to make your crimps tight and accurate. The individual wires go all the way through this connector head and allow you to make sure everything is lined up before you crimp down. After you crimp, use a cutter or the specifically made crimp tool [part]100054C[/part] to trim the end. The innovative Snag Proof Strain Relief is designed specifically to be crimped with the EZ-RJ45 plugs. The primary strain relief of the plug locks the snag proof strain relief in place so they will not pull off, creating one, integral assembly. Once crimped, this design allows the plug's primary strain relief to relax slightly, preventing the cable pairs from being over compressed. This decrease in stress contributes to achieving peak performance. The tab on the strain relief is designed to extend over the plug's locking tab, making it snag proof when administering patch cords.
    Part No. 202016J
    Add to cart Details Quick View

  • Platinum Tools EZ-RJ45 Shielded Cat5e/6 Connectors

    $127.95 202020J
    Platinum Tools EZ-RJ45 shielded Cat6/5e crimp plugs feature an internal ground simplify twisted pair terminations by allowing the wires to be inserted through the connector and out the front, to easily verify the proper wiring order. Pulling the connector down over the cable jacket and seating it tightly in the rear of the connector optimizes electrical performance of the termination. Reducing the distance between the wire twists and contacts also improves performance. Terminate with the patented EZ-RJ45 Crimp Tools - crimp and trim in one cycle.
    Part No. 202020J
    Add to cart Details Quick View

  • Platinum Tools EZ-RJ45 Shielded Cat5e/6 Connectors

    $136.95 202022J
    Platinum Tools EZ-RJ45 shielded Cat6/5e crimp plugs feature an external ground simplify twisted pair terminations by allowing the wires to be inserted through the connector and out the front, to easily verify the proper wiring order. Pulling the connector down over the cable jacket and seating it tightly in the rear of the connector optimizes electrical performance of the termination. Reducing the distance between the wire twists and contacts also improves performance. Terminate with the patented EZ-RJ45 Crimp Tools - crimp and trim in one cycle.
    Part No. 202022J
    Add to cart Details Quick View

  • Platinum Tools EZ-RJ45 Cat6 Strain Relief, Clear, 100 pieces

    $39.95 202036J
    The innovative Snag Proof Strain Relief is designed specifically to be crimped with the EZ-RJ45 plugs. The primary strain relief of the plug locks the snag proof strain relief in place so they will not pull off, creating one, integral assembly. Once crimped, this design allows the plug's primary strain relief to relax slightly, preventing the cable pairs from being over compressed. This decrease in stress contributes to achieving peak performance. The tab on the strain relief is designed to extend over the plug's locking tab, making it snag proof when administering patch cords.
    Part No. 202036J
    Add to cart Details Quick View

  • Platinum Tools Cat5e/6 ezEX44-RJ45 Crimp Plugs, 100 pc

    $114.95 202044J
    Platinum Tools ezEX44-RJ45 crimp plugs for Cat6 feature a Hi-Lo stagger to isolate each conductor. Simple to use one piece connectors with a pass through design allow conductors to feed through the front end of the connector and be cut flush when the crimp is completed. Crimp tool [part]100061C[/part] is required for this connector. This product comes in a plastic tub with 100 pieces. This product is RoHS2 and UL compliant Max OD of cable: 0.290" (7.36mm) Insulation diameter (conductor) size range: 0.039" - 0.044"(0.99 - 1.12mm)
    Part No. 202044J
    Add to cart Details Quick View

  • Platinum Tools ezEX-RJ45 Shielded Cat5e/6 Internal Gnd 50pc

    $154.95 202050J
    Platinum Tools ezEX-RJ45 shielded connectors with internal ground feature a Hi-Lo stagger to isolate each connector. A simple to use one-piece design. For use with Cat5e and Cat6 cable. These connectors allow the conductors to pass through the front of the connector and must be used in conjunction with crimp tool [part]100061C[/part] This product comes in a plastic tub and contains 50 pieces. This product is RoHS2 and UL compliant Max OD of cable: 0.280"(7.1mm) Insulation diameter (conductor) size range: 0.039" - 0.044" (0.99 - 1.12mm)
    Part No. 202050J
    Add to cart Details Quick View

  • Platinum Tools ezEX-RJ45 Cat5e/6 Shielded Crimp Plugs, 50 pc

    $163.95 202051J
    Platinum Tools ezEX-RJ45 shielded connectors with external ground feature a Hi-Lo stagger to isolate each conductor. A simple to use one-piece design. For use with Cat5e and Cat6 cable. These connectors allow the conductors to pass through the front of the connector and must be used in conjunction with crimp tool [part]100061C[/part]. This product comes in a plastic tub and contains 50 pieces. This product is RoHS2 and UL compliant Max OD of cable: 0.305" (7.74mm) Insulation diameter (conductor) size range: 0.039" - 0.044" (1.0 - 1.12 mm)
    Part No. 202051J
    Add to cart Details Quick View

  • Phone/Data RJ22 Crimp Connectors Flat Cable 4P4C

    $7.95 31D0-440HD
    These RJ22 4P4C Crimp Connectors are for flat telephone cables and come in bags of 100 pieces. The color is clear.
    Part No. 31D0-440HD
    Add to cart Details Quick View

  • Cat5 RJ45 Crimp Connectors Solid/Stranded Cable 100 Piece

    $17.95 31D0-500HD
    These Cat5 RJ45 crimp connectors are for Cat5 phone wiring/cable. They are designed specifically for telephone applications. (Not for Ethernet or internet use!) The contacts are gold plated to prevent corrosion and to avoid connectivity issues for the life of the cable.
    Part No. 31D0-500HD
    Add to cart Details Quick View

  • Shielded Cat5e RJ45 Crimp Connectors 50 Piece

    $16.95 31D0-51007
    These crimp connectors are used to terminate a CAT-5 or CAT-5E cable. The connectors are shielded and come in a bag of 50 pieces.
    Part No. 31D0-51007
    Add to cart Details Quick View

  • Cat6 RJ45 Crimp Connectors Solid/Stranded Cable 100 Piece

    $38.95 31D0-580HD
    These crimp connectors are used to terminate a CAT-6 cable. The wire insertion guide is fixed inside of the connectors and cannot be removed. It features a staggered insertion as the individual wires of CAT6 are too thick to be arranged in a straight line as with CAT5E connectors.
    Part No. 31D0-580HD
    Add to cart Details Quick View

  • Shielded Cat6 RJ45 Crimp Connectors 100 Piece

    $59.95 31D0-584HD
    This shielded Cat6 crimp connector works with stranded Cat6 cable and comes in a bag of 100 pieces. Note: These will not work with 23AWG Solid Cat6.
    Part No. 31D0-584HD
    Add to cart Details Quick View

  • Cat6a RJ45 Ends, wire guide, spacer bar, for stranded 50 Pcs

    $20.95 31D0-62050
    These three piece Cat6a connectors make the task of terminating a stranded cable to TIA/EIA standards easy. Each bag of 50 modular connectors includes 50 spacer bars and 50 wire guides. The spacer bar exists to help maintain the twist of each pair as close to the crimp as possible. The wire guide insert helps maintain the individual conductor/wire order.
    Part No. 31D0-62050
    Add to cart Details Quick View

  • RJ11 6P4C Modular Plug for Stranded Wire Bag of 50

    $3.95 31D0-6P4CS
    RJ11 plugs are a type of plug typically used for carrying telephone signals. 6P4C means that the contacts on these plugs have 6 positions in which are placed 4 gold plated contacts, a standard for RJ11 jacks. These plugs are also designed for use with stranded wire. These come in a bag of 50.
    Part No. 31D0-6P4CS
    Add to cart Details Quick View

  • RJ12 6P4C Modular Plug for Flat Wire Bag of 50

    $4.95 31D0-6P6CF
    RJ12 plugs are a type of plug typically used for carrying telephone and data signals. 6P6C means that the contacts on these plugs have 6 positions in which are placed 6 gold plated contacts, a standard for RJ12 jacks. These plugs are also designed for use with stranded wire. They come in a bag of 50.
    Part No. 31D0-6P6CF
    Add to cart Details Quick View

  • Cat6 Shielded Crimp Connector Stranded Cable 100 Pieces

    $65.95 31X8-580HD
    CAT6 Shielded Crimp Connector for Stranded Cable w/guides (100 Pcs Per Bag). These Shielded Cat6 Crimp Connectors for Stranded Cables come in bags of 100 pieces and come with guides.
    Part No. 31X8-580HD
    Add to cart Details Quick View

  • Black RJ45 Strain Relief Boots, 50 Pieces / Bag

    $5.95 SR-8P8C-BK
    Black RJ45 Strain Relief Boots are designed to fit over the end of a Cat5, Cat5e and Cat6 cable to relieve the strain on the connector and to clean up the cosmetics of the cable. These particular boots are sold in bags of 50 pieces.
    Part No. SR-8P8C-BK
    Add to cart Details Quick View

  • Blue RJ45 Strain Relief Boots, 50 Pieces / Bag

    $5.95 SR-8P8C-BL
    Blue RJ45 Strain Relief Boots are designed to fit over the end of a Cat5, Cat5e and Cat6 cable to relieve the strain on the connector and to clean up the cosmetics of the cable. These particular boots are sold in bags of 50 pieces.
    Part No. SR-8P8C-BL
    Add to cart Details Quick View

  • Green RJ45 Strain Relief Boots, 50 Pieces / Bag

    $5.95 SR-8P8C-GR
    Green RJ45 Strain Relief Boots are designed to fit over the end of a Cat5, Cat5e and Cat6 cable to relieve the strain on the connector and to clean up the cosmetics of the cable. These particular boots are sold in bags of 50 pieces.
    Part No. SR-8P8C-GR
    Add to cart Details Quick View

  • Gray RJ45 Strain Relief Boots, 50 Pieces / Bag

    $5.95 SR-8P8C-GY
    Gray RJ45 Strain Relief Boots are designed to fit over the end of a Cat5, Cat5e and Cat6 cable to relieve the strain on the connector and to clean up the cosmetics of the cable. These particular boots are sold in bags of 50 pieces.
    Part No. SR-8P8C-GY
    Add to cart Details Quick View

  • Orange RJ45 Strain Relief Boots, 50 Pieces / Bag

    $5.95 SR-8P8C-OR
    Orange RJ45 Strain Relief Boots are designed to fit over the end of a Cat5, Cat5e and Cat6 cable to relieve the strain on the connector and to clean up the cosmetics of the cable. These particular boots are sold in bags of 50 pieces.
    Part No. SR-8P8C-OR
    Add to cart Details Quick View

  • Yellow RJ45 Strain Relief Boots, 50 Pieces / Bag

    $5.95 SR-8P8C-YL
    Yellow RJ45 Strain Relief Boots are designed to fit over the end of a Cat5, Cat5e and Cat6 cable to relieve the strain on the connector and to clean up the cosmetics of the cable. These particular boots are sold in bags of 50 pieces.
    Part No. SR-8P8C-YL
    Add to cart Details Quick View

  • UTP Port Doubler, 1 x 10/100Base-T + 1 x Voice/Token Ring to 1 Port

    $10.00 34003
    Our Port Doublers allow two devices to be connected using only one port of a structured cabling system. The CAT5/5e/6 cable used in a conventional Fast Ethernet network is made up of 8 conductors, 4 of which are unused. The port doubler makes use of these 4 spare conductors, to provide a second connection over a single cable run, without any loss of performance.
    Port Doublers must be used in pairs by connecting one to the patch panel and the other to the wall outlet.
    Please note: these doublers are sold as single units not pairs.
    • 1 x 10/100Base-T device and 1 x Voice or Token Ring device to 1 port
    • Low cost solution for adding extra connections
    • Existing installations can be expanded quickly and easily allowing additional devices to be added temporarily or permanently
    • No performance loss
    • Saves adding additional cable runs
    • Ideal for existing installations where additional cables cannot be installed easily
    Part No. 34003
    Add to cart Details Quick View

  • RJ-45 Female to Female, UTP CAT6 (Line Coupler)

    $9.00 34009
    • RJ-45 Female to RJ-45 Female, Unshielded
    "
    Add to cart Details Quick View

  • STP Port Doubler, 2 x Voice/Token Ring to 1 Port

    $13.00 34014
    Our Port Doublers allow two devices to be connected using only one port of a structured cabling system. The CAT5/5e/6 cable used in a conventional Fast Ethernet network is made up of 8 conductors, 4 of which are unused. The port doubler makes use of these 4 spare conductors, to provide a second connection over a single cable run, without any loss of performance.
    Port Doublers must be used in pairs by connecting one to the patch panel and the other to the wall outlet.
    Please note: these doublers are sold as single units not pairs.
    • 2 x Voice or Token Ring devices to 1 port
    • Low cost solution for adding extra connections
    • Existing installations can be expanded quickly and easily allowing additional devices to be added temporarily or permanently
    • No performance loss
    • Saves adding additional cable runs
    • Ideal for existing installations where additional cables cannot be installed easily
    Part No. 34014
    Add to cart Details Quick View

  • 6 Way RJ-12 Cable, 50m

    $25.90 34229
    • RJ12 Cable 6P6C
    • RJ12 Male (6 pin) to RJ12 Male (6 pin)
    • Flat Cable 6 core, Connection 1:1
    • Used for telecommunication connections
    • 10 year warranty

     

    The Lindy RJ12 Cable is a high-quality cable that allows users to connect telecommunication devices with a

    RJ12 6/6 Port

     

    The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. 

    The cables are packaged individually in a polybag.

     

    RJ-12 cables are available in lengths from 2m to 50m.

    "
    Add to cart Details Quick View

  • Post-assembly RJ-45 Male Strain Relief Boot, Green (10 per pack)

    $5.00 60388
    • Post-assembly boots clip-together over cables with RJ-45 connectors already crimped on
    • For cable diameters up to 6mm
    • Great for identification at patch panels
    Part No. 60388
    Add to cart Details Quick View

  • Post-assembly RJ-45 Male Strain Relief Boot, Yellow (10 per pack)

    $5.00 60389
    • Post-assembly boots clip-together over cables with RJ-45 connectors already crimped on
    • For cable diameters up to 6mm
    • Great for identification at patch panels
    Part No. 60389
    Add to cart Details Quick View

  • Post-assembly RJ-45 Male Strain Relief Boot, Blue (10 per pack)

    $5.00 60390
    • Post-assembly boots clip-together over cables with RJ-45 connectors already crimped on
    • For cable diameters up to 6mm
    • Great for identification at patch panels
    Part No. 60390
    Add to cart Details Quick View

  • Post-assembly RJ-45 Male Strain Relief Boot, White (10 per pack)

    $5.00 60391
    • Post-assembly boots clip-together over cables with RJ-45 connectors already crimped on
    • For cable diameters up to 6mm
    • Great for identification at patch panels
    Part No. 60391
    Add to cart Details Quick View

The Connectivity Center is a supplier of some of the leading physical cybersecurity technologies and physical data security products. We pride ourselves in quality, value, variety, and versatility. We want to be a one-stop shop for most of your physical cybersecurity needs, and we love to serve our partners in this evolving industry.

ACCOUNT

RESOURCES

INFO

The Connectivity Center is committed to ensuring that its website is accessible to people with disabilities. We strive to have all pages on our website meet W3C Web Content Accessibility Guidelines 2.0, Level AA conformance. Any issues should be reported to mail@connectivitycenter.com.

Copyright © 2012 –    |   The Connectivity Center   |   All Rights Reserved   |   Powered by LeadWorks

CALL NOW preloader
Go to Top