-
6 Strand Fiber Distribution Pigtail, Singlemode, SC/APC Connectors, Green Boots, 3 meter(1m 900um fanout + 2m distribution tail) -
12 Strand Fiber Distribution Pigtail, Singlemode, LC/UPC Connectors, Blue Boots, 3 meter(1m 900um fanout + 2m distribution tail) -
LC/APC Terminator Connector -
LC/UPC Black Hole Connector -
LC Loopback Module Multimode 50/125 -
LC Loopback Module Singlemode 9/125 -
ST/UPC 9/125 Terminator Connector Back Reflection -50dB -
SC/UPC Female to SC/APC Male Simplex Adapter -
Use these LC Fiber Cap to protect your LC terminated fiber optic cables from contamination by dust and/or dirt.Part No. 30LC-010HD -
You can expect to get the most out of your fiber optic cables without the right coupling equipment. At CableWholesale, we want to ensure you are able to find the right keystone for your coupling needs, which is why we have several options available. With our LC Fiber Optic Network Coupler, you will be able to easily connect two different fiber optic cables together. In fact, this white keystone allows for seamlessly extending your cables at a moment's notice. You can place your order today from CableWholesale, and make sure you get in touch with us if you have any questions!Part No. 30LC-LC400 -
Corning 95-000-40 Unicam Standard-performance Connector, SC, 62.5/125 um Multimode (OM1), Ceramic Ferrule, Single Pack, Beige Housing, Beige Boot -
No matter what type of fiber optic setup you have, you're going to want to keep it as clean and neat as possible. The team at CableWholesale is here to help you get the job done with our selection of white keystone products. We offer the SC Fiber Optic Network Coupler, an easy-to-use accessory that will work seamlessly with your keystone wall plates. If you are attempting to run one of your SC-terminated cables through a wall and into a keystone plate, this coupler will make the process a simple task. Order yours today, and please contact the CableWholesale team if you would like additional details!Part No. 30SC-SC400 -
The team at CableWholesale understands that you want to make your fiber optic network set a simple process. When you are dealing with so many cables and couplers, we understand it can be a bit confusing, which is why we're here to help with our ST Fiber Optic Network Coupler. Any time you are running one of your ST cables in your wall to a plate this coupler will help you complete the project. Keeping your network setup as tidy as possible is always ideal, and you can get started today by placing your order with CableWholesale. Don't hesitate to contact us if you have any questions about our white keystone products!Part No. 30ST-ST400 -
This SC and ST Fiber Dust Cap will save your fiber optic cable from contamination by dust and/or dirt. Comes in a bag of 100 pieces.Part No. 30SX-010HD -
40mm Fusion Splice Sleeves, 50 Pack -
60mm Fusion Splice Sleeves, 50 Pack -
Splice Sleeve Spatula -
Mini 25mm Fusion Splice Sleeves, 50 Pack -
Mini 40mm Fusion Splice Sleeves, 50 Pack -
This SC to ST fiber optic converter will connect SC-terminated duplex fiber cable to an ST-terminated duplex fiber cable. This device includes plastic housing.Part No. 31F1-TC400 -
Fiber Optic Coupler, ST/ST Female, Duplex, Plastic Housing -
This simplex fiber optic coupler comes with its own housing and will connect two SC-terminated fiber cables together.Part No. 31F2-CC400 -
This duplex fiber optic coupler comes with its own housing and will connect two SC-terminated fiber cables together.Part No. 31F2-CC410 -
This LC/LC Female Duplex Fiber Optic Coupler is perfect for connecting two LC/LC fiber patch cables together. Adapter features plastic housing.Part No. 31F2-LL410 -
This MTRJ/MTRJ Female Fiber Optic Coupler will connect two MTRJ-terminated duplex fiber cables together. This device comes with plastic housing.Part No. 31F2-MM410 -
This ST/ST Female Simplex Fiber Optic Coupler is the perfect solution for connecting two ST/ST fiber optic patch cables. This coupler features metal housing.Part No. 31F2-TT400 -
Fiber Optic Cleaning Solution, Pump Bottle, 2 ounce -
Sticklers CleanWipes, Lint-Free Optical Grade Wipes, 800 count -
Pen-Style Cleaner for LC 1.25mm Ferrule Connector -
Pen-Style Cleaner for MTP/MPO Connector -
Pen-Style Cleaner for SC,ST,FC, Connector -
95-200-99 Corning Unicam High-performance Connector, LC, Single-mode (OS2), Ceramic Ferrule, Single Pack, Blue Housing, Blue BootPart No. 31LC-01295 -
95-000-99 Corning Unicam High-performance Connector, LC, 62.5 ?m Multimode (OM1), Ceramic Ferrule, Single Pack, Beige Housing, Beige BootPart No. 31LC-11195 -
Corning Unicam High-performance Connector, LC, 50 um Multimode (OM3/OM4 Compatible), Ceramic Ferrule, Single Pack, Black Housing, Aqua Boot -
Corning Unicam High-performance Connector, SC, 50 um Multimode (OM3/OM4 Compatible), Ceramic Ferrule, Single Pack, Black Housing, Aqua Boot -
95-000-41 Corning Unicam High-performance Connector, SC, 62.5 um Multimode (OM1), Ceramic Ferrule, Single Pack, Beige Housing, Beige Boot -
Corning Unicam High-performance Connector, SC, Single-mode (OS2), Ceramic Ferrule, Single Pack, Blue Housing, Blue Boot -
95-051-98-SP-X Corning Anaerobic Connector, LC, 50 um Multimode (OM3/OM4 Compatible), Ceramic Ferrule, Single Pack, Black Housing, Aqua Boot -
95-201-98-SP Corning Anaerobic Connector, LC, Single-mode (OS2), Ceramic Ferrule, Single Pack, Blue Housing, Blue Boot -
Fiber Wall Mount Patch Panel Enclosure, Unloaded, Holds 2 Adapter Plates, Black -
Splice Tray, 12 Position, Fusion Splice, 6.5 inches Long x 4.68 inches Wide x 0.41 High -
1U Fiber Optic Patch Panel, Capacity 3 LGX Adapter Plates / Cassettes / Modules, Unloaded, Solid Door, Black Powder Coat. Our 1RU Patch Panel provides many flexible fiber patching configurations in a 1RU form factor. It accommodates (3) LGX adapter plates, MPO break modules or splitter cassettes. Slide out trays and removable front and back doors allow easy access to the patch bay. Multiple cable retention brackets and tie down spots allow for convenient cable management. Spring-loaded stop latches keep the tray securely in place when retracted. Rackmount installs into a standard 19-inch rack. Includes non-flush brackets for 19-inch racks. Adapter plates, 23-inch mounting brackets, and 19-inch flush mount brackets are sold separately. Slide-Out Patch Panel Enclosures are designed for both high and low-density patching and splicing applications. Constructed from durable 14 gauge aluminum, these enclosures are lightweight and rugged. Cable organization features include may slack management spools, cable routing rings and tie down bridge stances. All our rack mount enclosures fit standard 19-inch racks and cabinets. Details- Slide Out Tray with Spring Loaded Stop Latch
- Holds 3 LGX Adapter Plates, Cassettes, or Modules
- Multiple Tie Downs and Cable Retention Brackets
- Hinged Front and Rear Removable Doors
- Rugged 14 Gauge Aluminum, Black
- Dimensions: 17in W x 14in D x 1.75in H
Part No. 68F1-10320 -
1U 19 inch Flush Mount Rack Adapter Brackets (Pair) in Black Powder Coat. 19-inch 1U Flush Mount Rack Adapter Brackets are used to adjust the orientation of our enclosures within a rack. When installed on an enclosure, these brackets mount the enclosure 3.5 inches further into the rack compared to the standard mounting position. The front of the enclosure sits flush against the rack opening. Compatible with most rack mount enclosures. Includes a pair of brackets and hardware to mount the brackets to the enclosure. Details- Flush Mount 1U Enclosure within a Standard Rack
- Compatible Enclosures- 1U Rack Mount Enclosures
- Compatible Racks- 19 inch Wide Racks
- Color - Black
Part No. 68F1-19010 -
2U 19 inch Flush Mount Rack Adapter Brackets (Pair) in Black Powder Coat. 19-inch 2U Flush Mount Rack Adapter Brackets are used to adjust the orientation of our enclosures within a rack. When installed on an enclosure, these brackets mount the enclosure 3.5 inches further into the rack compared to the standard mounting position. The front of the enclosure sits flush against the rack opening. Compatible with most rack mount enclosures. Includes a pair of brackets and hardware to mount the brackets to the enclosure. Details- Flush Mount 2U Enclosure within a Standard Rack
- Compatible Enclosures- 2U Rack Mount Enclosures
- Compatible Racks- 19 inch Wide Racks
- Color - Black
Part No. 68F1-19020 -
4U 19 inch Flush Mount Rack Adapter Brackets (Pair) in Black Powder Coat. 19-inch 4U Flush Mount Rack Adapter Brackets are used to adjust the orientation of our enclosures within a rack. When installed on an enclosure, these brackets mount the enclosure 3.5 inches further into the rack compared to the standard mounting position. The front of the enclosure sits flush against the rack opening. Compatible with most rack mount enclosures. Includes a pair of brackets and hardware to mount the brackets to the enclosure. Details- Flush Mount 4U Enclosure within a standard Rack
- Compatible Enclosures- 4U Rack Mount Enclosures
- Compatible Racks- 19 inch Wide Racks
- Color - Black
Part No. 68F1-19040 -
LGX Styled Blank plate with No Holes Unloaded - Black Powder Coat. Cover up unused LGX slots in our fiber patch panels with this LGX Styled Adapter Plates are easy snap-in style mount for use in Rack and wall-mount enclosures. Available in black powder coat. Details- 5.1 inch (130mm) x 1.13 inch (28.7mm)
- Easy snap-in mounting in FIS Rack and wallmount enclosures
- Multimode adapters utilize a phosphour bronze alignment sleeve
- Singlemode and APC adapter utilize a ceramic alignment sleeve
- Available in black powder coat
- LGX Compatible
Part No. 68F1-20010 -
2U Fiber Optic Patch Panel, Capacity 4 LGX Adapter Plates / Cassettes / Modules, Unloaded, Lexan Front Door, Black Powder Coat. Our 2U Fiber Optic Patch Panel provides many flexible fiber patching configurations in a 2U form factor. It accommodates up to 4 LGX adapter plates, MPO break modules or splitter cassettes. Slide out trays and removable front and back doors allow easy access to the patch bay. Multiple cable retention brackets and tie down spots allow for convenient cable management. Spring-loaded stop latches keep the tray securely in place when retracted. This enclosure installs into a standard 19-inch rack and includes non-flush brackets. Adapter plates, 23 inch mounting brackets and 19 inch flush mounting brackets are sold separately. Slide-Out Patch Panel Enclosures are designed for both high and low density patching and splicing applications. Constructed from durable 14 gauge aluminum, these enclosures are lightweight and rugged. Cable organization features include may slack management spools, cable routing rings and tie down bridge stances. All our fiber rack mount enclosures fit standard 19 inch racks and cabinets. Details- Slide Out Tray with Spring Loaded Stop Latch
- Holds 4 LGX Adapter Plates, Cassettes, or Modules
- Multiple Tie Downs and Cable Retention Brackets
- Hinged Front and Rear Removable Doors
- Transparent Lexan Front Door
- Rugged 14 Gauge Aluminum, Black
- Dimensions: 17in W x 14in D x 3.5in H
Part No. 68F1-20410 -
2U Fiber Optic Patch Panel, Capacity 6 LGX Adapter Plates / Cassettes / Modules, Unloaded, Lexan Front Door, Black Powder Coat. Our 2U Fiber Optic Patch Panel provides many flexible fiber patching configurations in a 2U form factor. It accommodates up to 6 LGX adapter plates, MPO break modules, or splitter cassettes. Slide out trays and removable front and back doors allow easy access to the patch bay. Multiple cable retention brackets and tie down spots allow for convenient cable management. Spring-loaded stop latches keep the tray securely in place when retracted. This enclosure installs into a standard 19-inch rack and includes non-flush brackets. Adapter plates, 23 inch mounting brackets and 19 inch flush mounting brackets are sold separately. Slide-Out Patch Panel Enclosures are designed for both high and low density patching and splicing applications. Constructed from durable 14 gauge aluminum, these enclosures are lightweight and rugged. Cable organization features include may slack management spools, cable routing rings and tie down bridge stances. All our fiber rack mount enclosures fit standard 19 inch racks and cabinets. Details- Slide Out Tray with Spring Loaded Stop Latch
- Holds 6 LGX Adapter Plates, Cassettes, or Modules
- Multiple Tie Downs and Cable Retention Brackets
- Hinged Front and Rear Removable Doors
- Transparent Lexan Front Door
- Rugged 14 Gauge Aluminum, Black
- Dimensions: 17in W x 14in D x 3.5in H
Part No. 68F1-20610
The Connectivity Center is a supplier of some of the leading physical cybersecurity technologies and physical data security products. We pride ourselves in quality, value, variety, and versatility. We want to be a one-stop shop for most of your physical cybersecurity needs, and we love to serve our partners in this evolving industry.
ACCOUNT
RESOURCES
INFO
The Connectivity Center is committed to ensuring that its website is accessible to people with disabilities. We strive to have all pages on our website meet W3C Web Content Accessibility Guidelines 2.0, Level AA conformance. Any issues should be reported to mail@connectivitycenter.com.
Copyright © 2012 –    |   The Connectivity Center   |   All Rights Reserved   |   Powered by LeadWorks
