Part No. LCLC-41025
-
This 25 Meter 10 Gigabit Aqua OM4 Fiber Optic cable has multimode LC/LC connectors on both ends. Fiber cables have become popular in recent years for a number of reasons, which include their resistance to RF (radio frequency) interference, and their ability to transmit data at longer lengths without the risk of data loss. -
Our 30 Meter (~98 feet) 10 Gigabit Aqua OM4 Fiber Optic Cable comes terminated with LC / LC connectors on both ends. This multimode fiber is designed to transmit information over long distances with increased speeds and extremely limited electrical interference. This cable is classified as duplex (two fibers) which means it permits simultaneous communication between devices. The cladding diameter is 125 microns.Part No. LCLC-41030 -
OM5 Wideband fiber optic cable features the industry standard lime green colored jacket. This 2 meter (~6.6 foot) cable is terminated with LC (Lucent Connector) connectors on both ends. All OM5 cable is multimode duplex and has a core size of 50/125 microns. OM5 Fiber cable is compatible and intermateable with OM3 and OM4 cablePart No. LCLC-51002 -
OM5 Wideband fiber optic cable features the industry standard lime green colored jacket. This 3 meter (~10 foot) cable is terminated with LC (Lucent Connector) connectors on both ends. All OM5 cable is multimode duplex and has a core size of 50/125 microns. OM5 Fiber cable is compatible and intermateable with OM3 and OM4 cablePart No. LCLC-51003 -
OM5 Wideband fiber optic cable features the industry standard lime green colored jacket. This 7 meter (~22.9 foot) cable is terminated with LC (Lucent Connector) connectors on both ends. All OM5 cable is multimode duplex and has a core size of 50/125 microns. OM5 Fiber cable is compatible and intermateable with OM3 and OM4 cablePart No. LCLC-51007 -
OM5 Wideband fiber optic cable features the industry standard lime green colored jacket. This 10 meter (~33 foot) cable is terminated with LC (Lucent Connector) connectors on both ends. All OM5 cable is multimode duplex and has a core size of 50/125 microns. OM5 Fiber cable is compatible and intermateable with OM3 and OM4 cablePart No. LCLC-51010 -
OM5 Wideband fiber optic cable features the industry standard lime green colored jacket. This 20 meter (~66 foot) cable is terminated with LC (Lucent Connector) connectors on both ends. All OM5 cable is multimode duplex and has a core size of 50/125 microns. OM5 Fiber cable is compatible and intermateable with OM3 and OM4 cablePart No. LCLC-51020 -
This 1 meter (~3 feet) fiber optic cable is terminated with a LC (Lucent Connector) connector on one end and a SC (Subscriber Connector) connector on the other end. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCSC-01201 -
This 2 meter (~6 feet) fiber optic cable is terminated with a LC (Lucent Connector) connector on one end and a SC (Subscriber Connector) connector on the other end. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCSC-01202 -
This 3 meter (~10 feet) fiber optic cable is terminated with a LC (Lucent Connector) connector on one end and a SC (Subscriber Connector) connector on the other end. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCSC-01203 -
This 5 meter (~16 feet) fiber optic cable is terminated with a LC (Lucent Connector) connector on one end and a SC (Subscriber Connector) connector on the other end. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCSC-01205 -
This 10 meter (~33 feet) fiber optic cable is terminated with a LC (Lucent Connector) connector on one end and a SC (Subscriber Connector) connector on the other end. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCSC-01210 -
This 15 meter (~49 feet) fiber optic cable is terminated with a LC (Lucent Connector) connector on one end and a SC (Subscriber Connector) connector on the other end. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCSC-01215 -
This 20 meter (~65 feet) fiber optic cable is terminated with a LC (Lucent Connector) connector on one end and a SC (Subscriber Connector) connector on the other end. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCSC-01220 -
This 30 meter (~98 feet) fiber optic cable is terminated with a LC (Lucent Connector) connector on one end and a SC (Subscriber Connector) connector on the other end. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCSC-01230 -
This 1 meter (~3 feet) fiber optic cable is terminated with a LC (Lucent Connector) connector on one end and a SC (Subscriber Connector) connector on the other end. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCSC-11001 -
This 2 meter (~6 feet) fiber optic cable is terminated with a LC (Lucent Connector) connector on one end and a SC (Subscriber Connector) connector on the other end. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCSC-11002 -
This 3 meter (~10 feet) fiber optic cable is terminated with a LC (Lucent Connector) connector on one end and a SC (Subscriber Connector) connector on the other end. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCSC-11003 -
This 5 meter (~16 feet) fiber optic cable is terminated with a LC (Lucent Connector) connector on one end and a SC (Subscriber Connector) connector on the other end. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCSC-11005 -
This 6 meter (~19 feet) fiber optic cable is terminated with a LC (Lucent Connector) connector on one end and a SC (Subscriber Connector) connector on the other end. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCSC-11006 -
This 10 meter (~33 feet) fiber optic cable is terminated with a LC (Lucent Connector) connector on one end and a SC (Subscriber Connector) connector on the other end. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCSC-11010 -
This 15 meter (~49 feet) fiber optic cable is terminated with a LC (Lucent Connector) connector on one end and a SC (Subscriber Connector) connector on the other end. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCSC-11015 -
This 1 meter (~3 feet) fiber optic cable is terminated with a LC (Lucent Connector) connector on one end and a SC (Subscriber Connector) connector on the other end. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCSC-11101 -
This 2 meter (~6 feet) fiber optic cable is terminated with a LC (Lucent Connector) connector on one end and a SC (Subscriber Connector) connector on the other end. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCSC-11102 -
This 3 meter (~10 feet) fiber optic cable is terminated with a LC (Lucent Connector) connector on one end and a SC (Subscriber Connector) connector on the other end. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCSC-11103 -
This 5 meter (~16 feet) fiber optic cable is terminated with a LC (Lucent Connector) connector on one end and a SC (Subscriber Connector) connector on the other end. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCSC-11105 -
This 10 meter (~33 feet) fiber optic cable is terminated with a LC (Lucent Connector) connector on one end and a SC (Subscriber Connector) connector on the other end. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCSC-11110 -
This Aqua Blue jacketed 1 meter (~3 feet) 10 gigabit rated fiber optic cable is terminated with a LC (Lucent Connector) connector on one end and a SC (Subscriber Connector) connector on the other end. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCSC-31001 -
This Aqua Blue jacketed 2 meter (~6 feet) 10 gigabit rated fiber optic cable is terminated with a LC (Lucent Connector) connector on one end and a SC (Subscriber Connector) connector on the other end. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCSC-31002 -
This Aqua Blue jacketed 3 meter (~10 feet) 10 gigabit rated fiber optic cable is terminated with a LC (Lucent Connector) connector on one end and a SC (Subscriber Connector) connector on the other end. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCSC-31003 -
This Aqua Blue jacketed 5 meter (~16 feet) 10 gigabit rated fiber optic cable is terminated with a LC (Lucent Connector) connector on one end and a SC (Subscriber Connector) connector on the other end. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCSC-31005 -
This Aqua Blue jacketed 7 meter (~23 feet) 10 gigabit rated fiber optic cable is terminated with a LC (Lucent Connector) connector on one end and a SC (Subscriber Connector) connector on the other end. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCSC-31007 -
This Aqua Blue jacketed 10 meter (~33 feet) 10 gigabit rated fiber optic cable is terminated with a LC (Lucent Connector) connector on one end and a SC (Subscriber Connector) connector on the other end. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCSC-31010 -
This 1 Meter (~3 foot) fiber optic cable is terminated with an LC (Lucent Connector) on one end and an ST (Straight Tip/Bayonet Connector) on the other end. It is a single-mode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCST-01201 -
This 2 meter (~6 feet) fiber optic cable is terminated with a LC (Lucent Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) connector on the other end. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCST-01202 -
This 3 meter (~10 feet) fiber optic cable is terminated with a LC (Lucent Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) connector on the other end. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCST-01203 -
This 5 meter (~16 feet) fiber optic cable is terminated with a LC (Lucent Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) connector on the other end. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCST-01205 -
This 10 meter (~33 feet) fiber optic cable is terminated with a LC (Lucent Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) connector on the other end. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCST-01210 -
This 2 meter (~6 feet) fiber optic cable is terminated with a LC (Lucent Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) connector on the other end. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCST-11002 -
This 3 meter (~10 feet) fiber optic cable is terminated with a LC (Lucent Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) connector on the other end. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCST-11003 -
This 5 meter (~16 feet) fiber optic cable is terminated with a LC (Lucent Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) connector on the other end. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCST-11005 -
This 2 meter (~6 feet) fiber optic cable is terminated with a LC (Lucent Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) connector on the other end. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCST-11102 -
This 3 meter (~10 feet) fiber optic cable is terminated with a LC (Lucent Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) connector on the other end. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCST-11103 -
This 5 meter (~16 feet) fiber optic cable is terminated with a LC (Lucent Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) connector on the other end. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCST-11105 -
This 10 meter (~33 feet) fiber optic cable is terminated with a LC (Lucent Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) connector on the other end. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCST-11110 -
This 15 meter (~49 feet) fiber optic cable is terminated with a LC (Lucent Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) connector on the other end. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCST-11115 -
This Aqua Blue jacketed 1 meter (~3 feet) 10 gigabit rated fiber optic cable is terminated with a LC (Lucent Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) connector on the other end. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCST-31001 -
This Aqua Blue jacketed 5 meter (~16 feet) 10 gigabit rated fiber optic cable is terminated with a LC (Lucent Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) connector on the other end. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. LCST-31005 -
This 1 meter (3.3 foot) high-quality Plenum approved fiber optic cable is 40/100 gigabit rated MTP / LC (MPO), 12 Strand cable with a Yellow colored jacket. Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Local building codes may require all cables run inside the walls or ceiling be Plenum rated. Singlemode cables can come with many different fiber optic connector types. This particular 40/100 gigabit Singlemode fiber optic cable offers a MTP/APC connector on one end, and 4 duplex LC/UPC connectors on other. It features a 9/125 micron core.Part No. MPLC-21001 -
This 3 meter (9.8 foot) high-quality Plenum approved fiber optic cable is 100 gigabit rated MTP / LC (MPO), 24 Strand cable with a Yellow colored jacket. Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Local building codes may require all cables run inside the walls or ceiling be Plenum rated. Singlemode cables can come with many different fiber optic connector types. This particular 100 gigabit Singlemode fiber optic cable offers a MTP/APC connector on one end, and 10 duplex LC/UPC connectors on other. It features a 9/125 micron core.Part No. MPLC-22003 -
This 5 meter (16.4 foot) high-quality Plenum approved fiber optic cable is 100 gigabit rated MTP / LC (MPO), 24 Strand cable with a Yellow colored jacket. Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Local building codes may require all cables run inside the walls or ceiling be Plenum rated. Singlemode cables can come with many different fiber optic connector types. This particular 100 gigabit Singlemode fiber optic cable offers a MTP/APC connector on one end, and 10 duplex LC/UPC connectors on other. It features a 9/125 micron core.Part No. MPLC-22005 -
This 1 meter (3 foot) high-quality Plenum approved fiber optic cable is 40/100 gigabit rated MTP / LC (MPO), 12 Strand cable with an Aqua Blue colored jacket. Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Local building codes may require all cables run inside the walls or ceiling be Plenum rated. Multimode cables can come with many different fiber optic connector types and a couple different core sizes. This particular 40/100 gigabit Multimode fiber optic cable offers MTP connectors, is duplex, and has a 50/125 micron core.Part No. MPLC-31001 -
This 2 meter (6 foot) high-quality Plenum approved fiber optic cable is 40/100 gigabit rated MTP / LC (MPO), 12 Strand cable with an Aqua Blue colored jacket. Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Local building codes may require all cables run inside the walls or ceiling be Plenum rated. Multimode cables can come with many different fiber optic connector types and a couple different core sizes. This particular 40/100 gigabit Multimode fiber optic cable offers MTP connectors, is duplex, and has a 50/125 micron core.Part No. MPLC-31002 -
This 3 meter (10 foot) high-quality Plenum approved fiber optic cable is 40/100 gigabit rated MTP / LC (MPO), 12 Strand cable with an Aqua Blue colored jacket. Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Local building codes may require all cables run inside the walls or ceiling be Plenum rated. Multimode cables can come with many different fiber optic connector types and a couple different core sizes. This particular 40/100 gigabit Multimode fiber optic cable offers MTP connectors, is duplex, and has a 50/125 micron core.Part No. MPLC-31003 -
This 5 meter (16.5 foot) high-quality Plenum approved fiber optic cable is 40/100 gigabit rated MTP / LC (MPO), 12 Strand cable with an Aqua Blue colored jacket. Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Local building codes may require all cables run inside the walls or ceiling be Plenum rated. Multimode cables can come with many different fiber optic connector types and a couple different core sizes. This particular 40/100 gigabit Multimode fiber optic cable offers MTP connectors, is duplex, and has a 50/125 micron core.Part No. MPLC-31005 -
This 10 meter (33 foot) high-quality Plenum approved fiber optic cable is 40/100 gigabit rated MTP / LC (MPO), 12 Strand cable with an Aqua Blue colored jacket. Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Local building codes may require all cables run inside the walls or ceiling be Plenum rated. Multimode cables can come with many different fiber optic connector types and a couple different core sizes. This particular 40/100 gigabit Multimode fiber optic cable offers MTP connectors, is duplex, and has a 50/125 micron core.Part No. MPLC-31010 -
This 30 meter (100 foot) high-quality Plenum approved fiber optic cable is 40/100 gigabit rated MTP / LC (MPO), 12 Strand cable with an Aqua Blue colored jacket. Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Local building codes may require all cables run inside the walls or ceiling be Plenum rated. Multimode cables can come with many different fiber optic connector types and a couple different core sizes. This particular 40/100 gigabit Multimode fiber optic cable offers MTP connectors, is duplex, and has a 50/125 micron core.Part No. MPLC-31030 -
This 1 meter (3.3 foot) high-quality Plenum approved fiber optic cable is 40/100 gigabit rated MTP / MTP (MPO). It features 12 fiber strands with a Yellow colored jacket. Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Local building codes may require all cables run inside the walls or ceiling be Plenum rated. Singlemode cables can come with many different fiber optic connector types. This particular 40/100 gigabit Singlemode fiber optic cable offers MTP connectors, and has a 9/125 micron core. MTP is a perfect solution cable. It can bridge over older legacy 1G/10G networks to the 40G/100G networks. By using a MTP to LC breakout cable you can connect 12LC connections to single MTP device. You can also use the 12 strand MTP cable to use as a trunk line on the backbone of your network. As you can run a single cable to connect 12 devices the higher density is is perfect to condense the amount of cables you need to run, also saving on installation labor.Part No. MPMP-21001 -
This 2 meter (6.6 foot) high-quality Plenum approved fiber optic cable is 40/100 gigabit rated MTP / MTP (MPO). It features 12 fiber strands with a Yellow colored jacket. Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Local building codes may require all cables run inside the walls or ceiling be Plenum rated. Singlemode cables can come with many different fiber optic connector types. This particular 40/100 gigabit Singlemode fiber optic cable offers MTP connectors, and has a 9/125 micron core. MTP is a perfect solution cable. It can bridge over older legacy 1G/10G networks to the 40G/100G networks. By using a MTP to LC breakout cable you can connect 12LC connections to single MTP device. You can also use the 12 strand MTP cable to use as a trunk line on the backbone of your network. As you can run a single cable to connect 12 devices the higher density is is perfect to condense the amount of cables you need to run, also saving on installation labor.Part No. MPMP-21002 -
This 3 meter (9.8 foot) high-quality Plenum approved fiber optic cable is 40/100 gigabit rated MTP / MTP (MPO). It features 12 fiber strands with a Yellow colored jacket. Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Local building codes may require all cables run inside the walls or ceiling be Plenum rated. Singlemode cables can come with many different fiber optic connector types. This particular 40/100 gigabit Singlemode fiber optic cable offers MTP connectors, and has a 9/125 micron core. MTP is a perfect solution cable. It can bridge over older legacy 1G/10G networks to the 40G/100G networks. By using a MTP to LC breakout cable you can connect 12LC connections to single MTP device. You can also use the 12 strand MTP cable to use as a trunk line on the backbone of your network. As you can run a single cable to connect 12 devices the higher density is is perfect to condense the amount of cables you need to run, also saving on installation labor.Part No. MPMP-21003 -
This 30 meter (98.4 foot) high-quality Plenum approved fiber optic cable is 40/100 gigabit rated MTP / MTP (MPO). It features 12 fiber strands with a Yellow colored jacket. Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Local building codes may require all cables run inside the walls or ceiling be Plenum rated. Singlemode cables can come with many different fiber optic connector types. This particular 40/100 gigabit Singlemode fiber optic cable offers MTP connectors, and has a 9/125 micron core. MTP is a perfect solution cable. It can bridge over older legacy 1G/10G networks to the 40G/100G networks. By using a MTP to LC breakout cable you can connect 12LC connections to single MTP device. You can also use the 12 strand MTP cable to use as a trunk line on the backbone of your network. As you can run a single cable to connect 12 devices the higher density is is perfect to condense the amount of cables you need to run, also saving on installation labor.Part No. MPMP-21030 -
This 50 meter (164 foot) high-quality Plenum approved fiber optic cable is 40/100 gigabit rated MTP / MTP (MPO). It features 12 fiber strands with a Yellow colored jacket. Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Local building codes may require all cables run inside the walls or ceiling be Plenum rated. Singlemode cables can come with many different fiber optic connector types. This particular 40/100 gigabit Singlemode fiber optic cable offers MTP connectors, and has a 9/125 micron core. MTP is a perfect solution cable. It can bridge over older legacy 1G/10G networks to the 40G/100G networks. By using a MTP to LC breakout cable you can connect 12LC connections to single MTP device. You can also use the 12 strand MTP cable to use as a trunk line on the backbone of your network. As you can run a single cable to connect 12 devices the higher density is is perfect to condense the amount of cables you need to run, also saving on installation labor.Part No. MPMP-21050 -
This 15 meter (49.2 foot) high-quality Plenum approved fiber optic cable is 100 gigabit rated MTP / MTP (MPO). It features 24 fiber strands with a Yellow colored jacket. Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Local building codes may require all cables run inside the walls or ceiling be Plenum rated. Singlemode cables can come with many different fiber optic connector types. This particular 100 gigabit Singlemode fiber optic cable offers MTP connectors, and has a 9/125 micron core. MTP is a perfect solution cable. It can bridge over older legacy 1G/10G networks to the 40G/100G networks. By using a MTP to LC breakout cable you can connect 12LC connections to single MTP device. You can also use the 24 strand MTP cable as a trunk line on the backbone of your network. As you can run a single cable to connect 12 devices the higher density is perfect to condense the amount of cables you need to run, also saving on installation labor.Part No. MPMP-22015 -
This 1 meter (3.3 foot) high-quality Plenum approved fiber optic cable is 40/100 gigabit rated MTP / MTP (MPO). It features 12 fiber strands with an Aqua Blue colored jacket. Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Local building codes may require all cables run inside the walls or ceiling be Plenum rated. Multimode cables can come with many different fiber optic connector types and a couple different core sizes. This particular 40/100 gigabit Multimode fiber optic cable offers MTP connectors, is and has a 50/125 micron core. MTP is a perfect solution cable. It can bridge over older legacy 1G/10G networks to the 40G/100G networks. By using a MTP to LC breakout cable you can connect 12LC connections to single MTP device. You can also use the 12 strand MTP cable to use as a trunk line on the backbone of your network. As you can run a single cable to connect 12 devices the higher density is is perfect to condense the amount of cables you need to run, also saving on installation labor.Part No. MPMP-31001 -
This 2 meter (6.6 foot) high-quality Plenum approved fiber optic cable is 40/100 gigabit rated MTP / MTP (MPO). It features 12 fiber strands with an Aqua Blue colored jacket. Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Local building codes may require all cables run inside the walls or ceiling be Plenum rated. Multimode cables can come with many different fiber optic connector types and a couple different core sizes. This particular 40/100 gigabit Multimode fiber optic cable offers MTP connectors, is and has a 50/125 micron core. MTP is a perfect solution cable. It can bridge over older legacy 1G/10G networks to the 40G/100G networks. By using a MTP to LC breakout cable you can connect 12LC connections to single MTP device. You can also use the 12 strand MTP cable to use as a trunk line on the backbone of your network. As you can run a single cable to connect 12 devices the higher density is is perfect to condense the amount of cables you need to run, also saving on installation labor.Part No. MPMP-31002 -
This 5 meter (16.5 foot) high-quality Plenum approved fiber optic cable is 40/100 gigabit rated MTP / MTP (MPO). It features 12 fiber strands with an Aqua Blue colored jacket. Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Local building codes may require all cables run inside the walls or ceiling be Plenum rated. Multimode cables can come with many different fiber optic connector types and a couple different core sizes. This particular 40/100 gigabit Multimode fiber optic cable offers MTP connectors, is and has a 50/125 micron core. MTP is a perfect solution cable. It can bridge over older legacy 1G/10G networks to the 40G/100G networks. By using a MTP to LC breakout cable you can connect 12LC connections to single MTP device. You can also use the 12 strand MTP cable to use as a trunk line on the backbone of your network. As you can run a single cable to connect 12 devices the higher density is is perfect to condense the amount of cables you need to run, also saving on installation labor.Part No. MPMP-31005 -
This 10 meter (33 foot) high-quality Plenum approved fiber optic cable is 40/100 gigabit rated MTP / MTP (MPO). It features 12 fiber strands with an Aqua Blue colored jacket. Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Local building codes may require all cables run inside the walls or ceiling be Plenum rated. Multimode cables can come with many different fiber optic connector types and a couple different core sizes. This particular 40/100 gigabit Multimode fiber optic cable offers MTP connectors, is and has a 50/125 micron core. MTP is a perfect solution cable. It can bridge over older legacy 1G/10G networks to the 40G/100G networks. By using a MTP to LC breakout cable you can connect 12LC connections to single MTP device. You can also use the 12 strand MTP cable to use as a trunk line on the backbone of your network. As you can run a single cable to connect 12 devices the higher density is is perfect to condense the amount of cables you need to run, also saving on installation labor.Part No. MPMP-31010 -
This 15 meter (49.5 foot) high-quality Plenum approved fiber optic cable is 40/100 gigabit rated MTP / MTP (MPO). It features 12 fiber strands with an Aqua Blue colored jacket. Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Local building codes may require all cables run inside the walls or ceiling be Plenum rated. Multimode cables can come with many different fiber optic connector types and a couple different core sizes. This particular 40/100 gigabit Multimode fiber optic cable offers MTP connectors, is and has a 50/125 micron core. MTP is a perfect solution cable. It can bridge over older legacy 1G/10G networks to the 40G/100G networks. By using a MTP to LC breakout cable you can connect 12LC connections to single MTP device. You can also use the 12 strand MTP cable to use as a trunk line on the backbone of your network. As you can run a single cable to connect 12 devices the higher density is is perfect to condense the amount of cables you need to run, also saving on installation labor.Part No. MPMP-31015 -
This 30 meter (100 foot) high-quality Plenum approved fiber optic cable is 40/100 gigabit rated MTP / MTP (MPO). It features 12 fiber strands with an Aqua Blue colored jacket. Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Local building codes may require all cables run inside the walls or ceiling be Plenum rated. Multimode cables can come with many different fiber optic connector types and a couple different core sizes. This particular 40/100 gigabit Multimode fiber optic cable offers MTP connectors, is and has a 50/125 micron core. MTP is a perfect solution cable. It can bridge over older legacy 1G/10G networks to the 40G/100G networks. By using a MTP to LC breakout cable you can connect 12LC connections to single MTP device. You can also use the 12 strand MTP cable to use as a trunk line on the backbone of your network. As you can run a single cable to connect 12 devices the higher density is is perfect to condense the amount of cables you need to run, also saving on installation labor.Part No. MPMP-31030 -
This 50 meter (165 foot) high-quality Plenum approved fiber optic cable is 40/100 gigabit rated MTP / MTP (MPO). It features 12 fiber strands with an Aqua Blue colored jacket. Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Local building codes may require all cables run inside the walls or ceiling be Plenum rated. Multimode cables can come with many different fiber optic connector types and a couple different core sizes. This particular 40/100 gigabit Multimode fiber optic cable offers MTP connectors, is and has a 50/125 micron core. MTP is a perfect solution cable. It can bridge over older legacy 1G/10G networks to the 40G/100G networks. By using a MTP to LC breakout cable you can connect 12LC connections to single MTP device. You can also use the 12 strand MTP cable to use as a trunk line on the backbone of your network. As you can run a single cable to connect 12 devices the higher density is is perfect to condense the amount of cables you need to run, also saving on installation labor.Part No. MPMP-31050 -
This 3 meter (10 foot) high-quality Plenum MTP / MTP (MPO) fiber optic cable supports 100 gigabit transmissions over 24 Strands with an Aqua Blue colored jacket. Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Local building codes may require all cables run inside the walls or ceiling be Plenum rated. Multimode cables can come with many different fiber optic connector types and a couple different core sizes. This particular 100 gigabit Multimode fiber optic cable offers MTP connectors, is and has a 50/125 micron core.Part No. MPMP-32003 -
This 7 meter (23 foot) high-quality Plenum MTP / MTP (MPO) fiber optic cable supports 100 gigabit transmissions over 24 Strands with an Aqua Blue colored jacket. Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Local building codes may require all cables run inside the walls or ceiling be Plenum rated. Multimode cables can come with many different fiber optic connector types and a couple different core sizes. This particular 100 gigabit Multimode fiber optic cable offers MTP connectors, is and has a 50/125 micron core.Part No. MPMP-32007 -
This 10 meter (33 foot) high-quality Plenum MTP / MTP (MPO) fiber optic cable supports 100 gigabit transmissions over 24 Strands with an Aqua Blue colored jacket. Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Local building codes may require all cables run inside the walls or ceiling be Plenum rated. Multimode cables can come with many different fiber optic connector types and a couple different core sizes. This particular 100 gigabit Multimode fiber optic cable offers MTP connectors, is and has a 50/125 micron core.Part No. MPMP-32010 -
This 15 meter (49.2 foot) high-quality Plenum MTP / MTP (MPO) fiber optic cable supports 100 gigabit transmissions over 24 Strands with an Aqua Blue colored jacket. Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Local building codes may require all cables run inside the walls or ceiling be Plenum rated. Multimode cables can come with many different fiber optic connector types and a couple different core sizes. This particular 100 gigabit Multimode fiber optic cable offers MTP connectors, is and has a 50/125 micron core.Part No. MPMP-32015 -
This 30 meter (100 foot) high-quality Plenum MTP / MTP (MPO) fiber optic cable supports 100 gigabit transmissions over 24 Strands with an Aqua Blue colored jacket. Plenum cable is jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP). Local building codes may require all cables run inside the walls or ceiling be Plenum rated. Multimode cables can come with many different fiber optic connector types and a couple different core sizes. This particular 100 gigabit Multimode fiber optic cable offers MTP connectors, is and has a 50/125 micron core.Part No. MPMP-32030 -
This 1 meter (~3 feet) fiber optic cable is terminated with SC (Subscriber Connector) connectors on both ends. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCSC-01201 -
This 2 meter (~6 feet) fiber optic cable is terminated with SC (Subscriber Connector) connectors on both ends. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCSC-01202 -
This 3 meter (~10 feet) fiber optic cable is terminated with SC (Subscriber Connector) connectors on both ends. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCSC-01203 -
This 4 meter (~13 feet) fiber optic cable is terminated with SC (Subscriber Connector) connectors on both ends. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCSC-01204 -
This 5 meter (~16 feet) fiber optic cable is terminated with SC (Subscriber Connector) connectors on both ends. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCSC-01205 -
This 10 meter (~33 feet) fiber optic cable is terminated with SC (Subscriber Connector) connectors on both ends. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCSC-01210 -
This 1 meter (~3 feet) fiber optic cable is terminated with SC (Subscriber Connector) connectors on both ends. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCSC-11001 -
This 2 meter (~6 feet) fiber optic cable is terminated with SC (Subscriber Connector) connectors on both ends. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCSC-11002 -
This 3 meter (~10 feet) fiber optic cable is terminated with SC (Subscriber Connector) connectors on both ends. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCSC-11003 -
This 4 meter (~13 feet) fiber optic cable is terminated with SC (Subscriber Connector) connectors on both ends. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCSC-11004 -
This 15 meter (~49 feet) fiber optic cable is terminated with SC (Subscriber Connector) connectors on both ends. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCSC-11015 -
This 1 meter (~3 feet) fiber optic cable is terminated with SC (Subscriber Connector) connectors on both ends. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCSC-11101 -
This 2 meter (~6 feet) fiber optic cable is terminated with SC (Subscriber Connector) connectors on both ends. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCSC-11102 -
This 3 meter (~10 feet) fiber optic cable is terminated with SC (Subscriber Connector) connectors on both ends. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCSC-11103 -
This 4 meter (~13 feet) fiber optic cable is terminated with SC (Subscriber Connector) connectors on both ends. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCSC-11104 -
This 5 meter (~16 feet) fiber optic cable is terminated with SC (Subscriber Connector) connectors on both ends. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCSC-11105 -
This 10 meter (~33 feet) fiber optic cable is terminated with SC (Subscriber Connector) connectors on both ends. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCSC-11110 -
This Aqua Blue jacketed 1 meter (~3 feet) 10 gigabit rated fiber optic cable is terminated with SC (Subscriber Connector) connectors on both ends. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCSC-31001 -
This Aqua Blue jacketed 2 meter (~6 feet) 10 gigabit rated fiber optic cable is terminated with SC (Subscriber Connector) connectors on both ends. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCSC-31002 -
This Aqua Blue jacketed 3 meter (~10 feet) 10 gigabit rated fiber optic cable is terminated with SC (Subscriber Connector) connectors on both ends. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCSC-31003 -
This Aqua Blue jacketed 5 meter (~16 feet) 10 gigabit rated fiber optic cable is terminated with SC (Subscriber Connector) connectors on both ends. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCSC-31005 -
This 1 meter (~3 feet) fiber optic cable is terminated with a SC (Subscriber Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) on the other end. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCST-01201 -
This 2 meter (~6 feet) fiber optic cable is terminated with a SC (Subscriber Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) on the other end. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCST-01202 -
This 3 meter (~10 feet) fiber optic cable is terminated with a SC (Subscriber Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) on the other end. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCST-01203 -
This 5 meter (~16 feet) fiber optic cable is terminated with a SC (Subscriber Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) on the other end. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCST-01205 -
This 10 meter (~33 feet) fiber optic cable is terminated with a SC (Subscriber Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) on the other end. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCST-01210 -
This 1 meter (~3 feet) fiber optic cable is terminated with a SC (Subscriber Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) connector on the other end. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCST-11001 -
This 2 meter (~6 feet) fiber optic cable is terminated with a SC (Subscriber Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) connector on the other end. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCST-11002 -
This 3 meter (~10 feet) fiber optic cable is terminated with a SC (Subscriber Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) connector on the other end. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCST-11003 -
This 1 meter (~3 feet) fiber optic cable is terminated with a SC (Subscriber Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) connector on the other end. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCST-11101 -
This 2 meter (~6 feet) fiber optic cable is terminated with a SC (Subscriber Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) connector on the other end. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCST-11102 -
This 3 meter (~10 feet) fiber optic cable is terminated with a SC (Subscriber Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) connector on the other end. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCST-11103 -
This 5 meter (~16 feet) fiber optic cable is terminated with a SC (Subscriber Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) connector on the other end. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCST-11105 -
This 10 meter (~33 feet) fiber optic cable is terminated with a SC (Subscriber Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) connector on the other end. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. SCST-11110 -
This 1 meter (~3 feet) fiber optic cable is terminated with ST (Straight Tip/Bayonet Connector) connectors on both ends. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. STST-01201 -
This 2 meter (~6 feet) fiber optic cable is terminated with ST (Straight Tip/Bayonet Connector) connectors on both ends. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. STST-01202 -
This 3 meter (~10 feet) fiber optic cable is terminated with ST (Straight Tip/Bayonet Connector) connectors on both ends. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. STST-01203 -
This 4 meter (~13 feet) fiber optic cable is terminated with ST (Straight Tip/Bayonet Connector) connectors on both ends. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. STST-01204 -
This 5 meter (~16 feet) fiber optic cable is terminated with ST (Straight Tip/Bayonet Connector) connectors on both ends. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. STST-01205 -
This 10 meter (~33 feet) fiber optic cable is terminated with ST (Straight Tip/Bayonet Connector) connectors on both ends. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. STST-01210 -
This 1 meter (~3 feet) fiber optic cable is terminated with ST (Straight Tip/Bayonet Connector) connectors on both ends. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. STST-11001 -
This 2 meter (~6 feet) fiber optic cable is terminated with ST (Straight Tip/Bayonet Connector) connectors on both ends. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. STST-11002 -
This 3 meter (~10 feet) fiber optic cable is terminated with ST (Straight Tip/Bayonet Connector) connectors on both ends. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. STST-11003 -
This 1 meter (~3 feet) fiber optic cable is terminated with ST (Straight Tip/Bayonet Connector) connectors on both ends. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. STST-11101 -
This 2 meter (~6 feet) fiber optic cable is terminated with ST (Straight Tip/Bayonet Connector) connectors on both ends. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. STST-11102 -
This 3 meter (~10 feet) fiber optic cable is terminated with ST (Straight Tip/Bayonet Connector) connectors on both ends. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. STST-11103 -
This 10 meter (~33 feet) fiber optic cable is terminated with ST (Straight Tip/Bayonet Connector) connectors on both ends. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)Part No. STST-11110 -
This 1-meter 62.5/125 mode conditioning fiber optic patch cable allows Gigabit 1000 Base-LX and 10GBASE-LRM routers and switches to be installed into existing multimode cable plants. This particular cable uses duplex ST connectors on the singlemode side and duplex ST connectors on the multimode side. The single mode leg is marked by a yellow jacket, this leg should always be plugged into the transmit of the single mode device in order for the connection to function. Mode conditioning fiber patch cables eliminate the effects of Differential Mode Delay (DMM) by offsetting the entry point of the singlemode laser as it enters the multimode medium.Part No. STST-12101 -
1U Fiber Optic Patch Panel, Capacity 3 LGX Adapter Plates / Cassettes / Modules, Unloaded, Solid Door, Black Powder Coat. Our 1RU Patch Panel provides many flexible fiber patching configurations in a 1RU form factor. It accommodates (3) LGX adapter plates, MPO break modules or splitter cassettes. Slide out trays and removable front and back doors allow easy access to the patch bay. Multiple cable retention brackets and tie down spots allow for convenient cable management. Spring-loaded stop latches keep the tray securely in place when retracted. Rackmount installs into a standard 19-inch rack. Includes non-flush brackets for 19-inch racks. Adapter plates, 23-inch mounting brackets, and 19-inch flush mount brackets are sold separately. Slide-Out Patch Panel Enclosures are designed for both high and low-density patching and splicing applications. Constructed from durable 14 gauge aluminum, these enclosures are lightweight and rugged. Cable organization features include may slack management spools, cable routing rings and tie down bridge stances. All our rack mount enclosures fit standard 19-inch racks and cabinets. Details- Slide Out Tray with Spring Loaded Stop Latch
- Holds 3 LGX Adapter Plates, Cassettes, or Modules
- Multiple Tie Downs and Cable Retention Brackets
- Hinged Front and Rear Removable Doors
- Rugged 14 Gauge Aluminum, Black
- Dimensions: 17in W x 14in D x 1.75in H
Part No. 68F1-10320 -
1U 19 inch Flush Mount Rack Adapter Brackets (Pair) in Black Powder Coat. 19-inch 1U Flush Mount Rack Adapter Brackets are used to adjust the orientation of our enclosures within a rack. When installed on an enclosure, these brackets mount the enclosure 3.5 inches further into the rack compared to the standard mounting position. The front of the enclosure sits flush against the rack opening. Compatible with most rack mount enclosures. Includes a pair of brackets and hardware to mount the brackets to the enclosure. Details- Flush Mount 1U Enclosure within a Standard Rack
- Compatible Enclosures- 1U Rack Mount Enclosures
- Compatible Racks- 19 inch Wide Racks
- Color - Black
Part No. 68F1-19010 -
2U 19 inch Flush Mount Rack Adapter Brackets (Pair) in Black Powder Coat. 19-inch 2U Flush Mount Rack Adapter Brackets are used to adjust the orientation of our enclosures within a rack. When installed on an enclosure, these brackets mount the enclosure 3.5 inches further into the rack compared to the standard mounting position. The front of the enclosure sits flush against the rack opening. Compatible with most rack mount enclosures. Includes a pair of brackets and hardware to mount the brackets to the enclosure. Details- Flush Mount 2U Enclosure within a Standard Rack
- Compatible Enclosures- 2U Rack Mount Enclosures
- Compatible Racks- 19 inch Wide Racks
- Color - Black
Part No. 68F1-19020 -
4U 19 inch Flush Mount Rack Adapter Brackets (Pair) in Black Powder Coat. 19-inch 4U Flush Mount Rack Adapter Brackets are used to adjust the orientation of our enclosures within a rack. When installed on an enclosure, these brackets mount the enclosure 3.5 inches further into the rack compared to the standard mounting position. The front of the enclosure sits flush against the rack opening. Compatible with most rack mount enclosures. Includes a pair of brackets and hardware to mount the brackets to the enclosure. Details- Flush Mount 4U Enclosure within a standard Rack
- Compatible Enclosures- 4U Rack Mount Enclosures
- Compatible Racks- 19 inch Wide Racks
- Color - Black
Part No. 68F1-19040 -
LGX Styled Blank plate with No Holes Unloaded - Black Powder Coat. Cover up unused LGX slots in our fiber patch panels with this LGX Styled Adapter Plates are easy snap-in style mount for use in Rack and wall-mount enclosures. Available in black powder coat. Details- 5.1 inch (130mm) x 1.13 inch (28.7mm)
- Easy snap-in mounting in FIS Rack and wallmount enclosures
- Multimode adapters utilize a phosphour bronze alignment sleeve
- Singlemode and APC adapter utilize a ceramic alignment sleeve
- Available in black powder coat
- LGX Compatible
Part No. 68F1-20010 -
2U Fiber Optic Patch Panel, Capacity 4 LGX Adapter Plates / Cassettes / Modules, Unloaded, Lexan Front Door, Black Powder Coat. Our 2U Fiber Optic Patch Panel provides many flexible fiber patching configurations in a 2U form factor. It accommodates up to 4 LGX adapter plates, MPO break modules or splitter cassettes. Slide out trays and removable front and back doors allow easy access to the patch bay. Multiple cable retention brackets and tie down spots allow for convenient cable management. Spring-loaded stop latches keep the tray securely in place when retracted. This enclosure installs into a standard 19-inch rack and includes non-flush brackets. Adapter plates, 23 inch mounting brackets and 19 inch flush mounting brackets are sold separately. Slide-Out Patch Panel Enclosures are designed for both high and low density patching and splicing applications. Constructed from durable 14 gauge aluminum, these enclosures are lightweight and rugged. Cable organization features include may slack management spools, cable routing rings and tie down bridge stances. All our fiber rack mount enclosures fit standard 19 inch racks and cabinets. Details- Slide Out Tray with Spring Loaded Stop Latch
- Holds 4 LGX Adapter Plates, Cassettes, or Modules
- Multiple Tie Downs and Cable Retention Brackets
- Hinged Front and Rear Removable Doors
- Transparent Lexan Front Door
- Rugged 14 Gauge Aluminum, Black
- Dimensions: 17in W x 14in D x 3.5in H
Part No. 68F1-20410 -
2U Fiber Optic Patch Panel, Capacity 6 LGX Adapter Plates / Cassettes / Modules, Unloaded, Lexan Front Door, Black Powder Coat. Our 2U Fiber Optic Patch Panel provides many flexible fiber patching configurations in a 2U form factor. It accommodates up to 6 LGX adapter plates, MPO break modules, or splitter cassettes. Slide out trays and removable front and back doors allow easy access to the patch bay. Multiple cable retention brackets and tie down spots allow for convenient cable management. Spring-loaded stop latches keep the tray securely in place when retracted. This enclosure installs into a standard 19-inch rack and includes non-flush brackets. Adapter plates, 23 inch mounting brackets and 19 inch flush mounting brackets are sold separately. Slide-Out Patch Panel Enclosures are designed for both high and low density patching and splicing applications. Constructed from durable 14 gauge aluminum, these enclosures are lightweight and rugged. Cable organization features include may slack management spools, cable routing rings and tie down bridge stances. All our fiber rack mount enclosures fit standard 19 inch racks and cabinets. Details- Slide Out Tray with Spring Loaded Stop Latch
- Holds 6 LGX Adapter Plates, Cassettes, or Modules
- Multiple Tie Downs and Cable Retention Brackets
- Hinged Front and Rear Removable Doors
- Transparent Lexan Front Door
- Rugged 14 Gauge Aluminum, Black
- Dimensions: 17in W x 14in D x 3.5in H
Part No. 68F1-20610 -
4U Fiber Optic Patch Panel, Capacity 12 LGX Adapter Plates / Cassettes / Modules, Unloaded, Solid Door, Black Powder Coat. Our 4U Fiber Optic Patch Panel provides many flexible fiber patching configurations in a 2U form factor. It accommodates up to 12 LGX adapter plates, MPO break modules or splitter cassettes. Slide out trays and removable front and back doors allow easy access to the patch bay. Multiple cable retention brackets and tie down spots allow for convenient cable management. Spring-loaded stop latches keep the tray securely in place when retracted. This enclosure installs into a standard 19-inch rack and includes non-flush brackets. Adapter plates, 23 inch mounting brackets and 19 inch flush mounting brackets are sold separately. Slide-Out Patch Panel Enclosures are designed for both high and low density patching and splicing applications. Constructed from durable 14 gauge aluminum, these enclosures are lightweight and rugged. Cable organization features include may slack management spools, cable routing rings and tie down bridge stances. All our fiber rack mount enclosures fit standard 19 inch racks and cabinets. Details- 19 or 23 inch rack mountable (23 inch mounting brackets sold separately)
- Accepts 12 LGX style adapter plates, modules or cassettes
- Vertically mounted panels with cable retaining rings on the front entry
- Hinged front and rear removable doors
- Dimensions: 17in W x 14in D x 7.125in H
- Powder coated 0.60 inch Aluminum
Part No. 68F1-41220 -
1U Swing Out Fiber Optic Patch Panel, Capacity 2 LGX Adapter Plates / Cassettes / Modules, Unloaded, Black Powder Coat. Our 1U Swing Out Patch Panel accommodates 2 LGX adapter plates, modules or cassettes. It is designed to house fiber terminations and accommodate patching of fiber links. The swing-out design offers easy access to cable and splices located in the patch and splice bay. Multiple cable retention brackets and tie down spots allow for convenient cable management. These units can be flush mounted or mounted with 3.5 inch protrusion from the rack with no additional accessories. Rack mount installs into a standard 19 inch rack with included mounting hardware. Adapter panels and 23 inch telco rack mounting brackets are sold separately. Details- Swing Out Shelf
- Holds 2 LGX Adapter Plates, Cassettes, or Modules
- Multiple Tie Downs and Cable Retention Brackets
- Flush Mount or 3.5 inch Protrusion; No Accessories Required
- Rugged 14 Gauge Aluminum, Black
- Dimensions: 17in W x 11.5in D x 1.75in H
Part No. 68F2-10210 -
LGX Compatible Adapter Plate featuring a Bank of 6 Singlemode SC Connectors in Blue for OS1 and OS2 applications, Black Powder Coat. All CableWholesale LGX Styled Adapter Plates are easy snap-in mounting in our Rack and wallmount enclosures. Available in black powder coat. Details- 6 Singlemode SC Connectors
- Blue for OS1 and OS2 applications
- 5.1 inch (130mm) x 1.13 inch (28.7mm)
- Easy snap-in mounting in our fiber Rack and wallmount enclosures
- utilizes a ceramic alignment sleeve
- Available in black powder coat
- LGX Compatible
Part No. 68F3-00060 -
LGX Compatible Adapter Plate featuring a Bank of 8 Singlemode ST Connectors, Black Powder Coat. All CableWholesale LGX Styled Adapter Plates are easy snap-in mounting in our Rack and wallmount enclosures. Available in black powder coat. Details- 8 Singlemode ST Connectors
- 5.1 inch (130mm) x 1.13 inch (28.7mm)
- Easy snap-in mounting in our fiber Rack and wallmount enclosures
- utilizes a ceramic alignment sleeve
- Available in black powder coat
- LGX Compatible
Part No. 68F3-00380 -
LGX Compatible Adapter Plate featuring a Bank of 6 Singlemode Duplex SC Connectors in Blue for OS1 and OS2 applications, Black Powder Coat. All CableWholesale LGX Styled Adapter Plates are easy snap-in mounting in our Rack and wallmount enclosures. Available in black powder coat. Details- 6 Singlemode Duplex SC Connectors
- Blue for OS1 and OS2 applications
- 5.1 inch (130mm) x 1.13 inch (28.7mm)
- Easy snap-in mounting in our fiber Rack and wallmount enclosures
- utilizes a ceramic alignment sleeve
- Available in black powder coat
- LGX Compatible
Part No. 68F3-01060 -
LGX Compatible Adapter Plate featuring a Bank of 6 Singlemode Duplex LC Connectors in Blue for OS1 and OS2 applications, Black Powder Coat. All CableWholesale LGX Styled Adapter Plates are easy snap-in mounting in our Rack and wallmount enclosures. Available in black powder coat. Details- 6 Singlemode Duplex LC Connectors
- Blue for OS1 and OS2 applications
- 5.1 inch (130mm) x 1.13 inch (28.7mm)
- Easy snap-in mounting in our fiber Rack and wallmount enclosures
- utilizes a ceramic alignment sleeve
- Available in black powder coat
- LGX Compatible
Part No. 68F3-01160 -
LGX Compatible Adapter Plate featuring a Bank of 6 Singlemode LC Quad Connectors in Blue for OS1 and OS2 applications, Black Powder Coat. All CableWholesale LGX Styled Adapter Plates are easy snap-in mounting in our Rack and wallmount enclosures. Available in black powder coat. Details- 6 Singlemode Quad LC Connectors
- Blue for OS1 and OS2 applications
- 5.1 inch (130mm) x 1.13 inch (28.7mm)
- Easy snap-in mounting in our fiber Rack and wallmount enclosures
- utilizes a ceramic alignment sleeve
- Available in black powder coat
- LGX Compatible
Part No. 68F3-02160 -
LGX Compatible Adapter Plate featuring a Bank of 6 Multimode SC Connectors in Beige for OM1 and OM2 applications, Black Powder Coat. All CableWholesale LGX Styled Adapter Plates are easy snap-in mounting in our Rack and wallmount enclosures. Available in black powder coat. Details- 6 Multimode Duplex SC Connectors
- Beige for OM1 and OM2 applications
- 5.1 inch (130mm) x 1.13 inch (28.7mm)
- Easy snap-in mounting in our fiber Rack and wallmount enclosures
- utilizes a ceramic alignment sleeve
- Available in black powder coat
- LGX Compatible
Part No. 68F3-10060 -
LGX Compatible Adapter Plate featuring a Bank of 6 Multimode ST Connectors, Black Powder Coat. All CableWholesale LGX Styled Adapter Plates are easy snap-in mounting in our Rack and wallmount enclosures. Available in black powder coat. Details- 6 Multimode ST Connectors
- 5.1 inch (130mm) x 1.13 inch (28.7mm)
- Easy snap-in mounting in our fiber Rack and wallmount enclosures
- utilizes a ceramic alignment sleeve
- Available in black powder coat
- LGX Compatible
Part No. 68F3-10360 -
LGX Compatible Adapter Plate featuring a Bank of 6 Multimode Duplex SC Connectors in Beige for OM1 and OM2 applications, Black Powder Coat. All CableWholesale LGX Styled Adapter Plates are easy snap-in mounting in our Rack and wallmount enclosures. Available in black powder coat. Details- 6 Multimode Duplex SC Connectors
- Beige for OM1 and OM2 applications
- 5.1 inch (130mm) x 1.13 inch (28.7mm)
- Easy snap-in mounting in our fiber Rack and wallmount enclosures
- utilizes a ceramic alignment sleeve
- Available in black powder coat
- LGX Compatible
Part No. 68F3-11060 -
LGX Compatible Adapter Plate featuring a Bank of 6 Multimode Duplex LC Connectors in Beige for OM1 and OM2 applications, Black Powder Coat. All CableWholesale LGX Styled Adapter Plates are easy snap-in mounting in our Rack and wallmount enclosures. Available in black powder coat. Details- 6 Multimode Duplex LC Connectors
- Beige for OM1 and OM2 applications
- 5.1 inch (130mm) x 1.13 inch (28.7mm)
- Easy snap-in mounting in our fiber Rack and wallmount enclosures
- utilizes a ceramic alignment sleeve
- Available in black powder coat
- LGX Compatible
Part No. 68F3-11160 -
LGX Compatible Adapter Plate featuring a Bank of 6 Multimode Quad LC Connectors in Beige for OM1 and OM2 applications, Black Powder Coat. All CableWholesale LGX Styled Adapter Plates are easy snap-in mounting in our Rack and wallmount enclosures. Available in black powder coat. Details- 6 Multimode Quad LC Connectors
- Beige for OM1 and OM2 applications
- 5.1 inch (130mm) x 1.13 inch (28.7mm)
- Easy snap-in mounting in our fiber Rack and wallmount enclosures
- utilizes a ceramic alignment sleeve
- Available in black powder coat
- LGX Compatible
Part No. 68F3-12160 -
LGX Compatible Adapter Plate featuring a Bank of 6 Multimode Duplex SC Connectors in Aqua for OM3 and OM4 10Gbit applications, Black Powder Coat. All CableWholesale LGX Styled Adapter Plates are easy snap-in mounting in our Rack and wallmount enclosures. Available in black powder coat. Details- 6 Multimode Duplex SC Connectors
- Aqua for OM3 and OM4 10 Gigabit applications
- 5.1 inch (130mm) x 1.13 inch (28.7mm)
- Easy snap-in mounting in our fiber Rack and wallmount enclosures
- utilizes a ceramic alignment sleeve
- Available in black powder coat
- LGX Compatible
Part No. 68F3-20060 -
LGX Compatible Adapter Plate featuring a Bank of 6 Multimode Duplex LC Connectors in Aqua for OM3 and OM4 10Gbit applications, Black Powder Coat. All CableWholesale LGX Styled Adapter Plates are easy snap-in mounting in our Rack and wallmount enclosures. Available in black powder coat. Details- 6 Multimode Duplex LC Connectors
- Aqua for OM3 and OM4 10 Gigabit applications
- 5.1 inch (130mm) x 1.13 inch (28.7mm)
- Easy snap-in mounting in our fiber Rack and wallmount enclosures
- utilizes a ceramic alignment sleeve
- Available in black powder coat
- LGX Compatible
Part No. 68F3-21160
