web analytics
  • Platinum Tools Phone / Data RJ22 Crimp Connectors for Flat Cable, 4P4C, 500 pieces
    Part No. 106100
  • Platinum Tools Phone / Data RJ22 Crimp Connectors for Flat Cable, 4P4C, 100 Pieces/Jar
    Part No. 106103J
    • IEEE 802.3af compliant
    • Input: 100-240V AC 50/60Hz 0.4A
    • Output: 48V DC 16W (Max)
    • LED indicators for Link, Activity, and Error
    • Autosensing, detects when a compatible device is connected and turns on
    • Protection circuit detects short circuit, overload and automatically turns off
    • Uses standard RJ45 connections
    • Operating distance: Up to 90m
    • Operating distances may vary depending on the cable type used and the power requirements of the connected device
    • Ideal for use with existing installations where additional power cables cannot be installed easily
    • 2 Year warranty
    Note: This POE Injector may also be used in conjunction with our POE Splitter (sold separately) for powering non POE devices such IP cameras, access points and wireless routers.
    Part No. 25052
  • Our Port Doublers allow two devices to be connected using only one port of a structured cabling system. The CAT5/5e/6 cable used in a conventional Fast Ethernet network is made up of 8 conductors, 4 of which are unused. The port doubler makes use of these 4 spare conductors, to provide a second connection over a single cable run, without any loss of performance.
    Port Doublers must be used in pairs by connecting one to the patch panel and the other to the wall outlet.
    Please note: these doublers are sold as single units not pairs.
    • 1 x 10/100Base-T device and 1 x Voice or Token Ring device to 1 port
    • Low cost solution for adding extra connections
    • Existing installations can be expanded quickly and easily allowing additional devices to be added temporarily or permanently
    • No performance loss
    • Saves adding additional cable runs
    • Ideal for existing installations where additional cables cannot be installed easily
    Part No. 34003
  • Our Port Doublers allow two devices to be connected using only one port of a structured cabling system. The CAT5/5e/6 cable used in a conventional Fast Ethernet network is made up of 8 conductors, 4 of which are unused. The port doubler makes use of these 4 spare conductors, to provide a second connection over a single cable run, without any loss of performance.
    Port Doublers must be used in pairs by connecting one to the patch panel and the other to the wall outlet.
    Please note: these doublers are sold as single units not pairs.
    • 2 x Voice or Token Ring devices to 1 port
    • Low cost solution for adding extra connections
    • Existing installations can be expanded quickly and easily allowing additional devices to be added temporarily or permanently
    • No performance loss
    • Saves adding additional cable runs
    • Ideal for existing installations where additional cables cannot be installed easily
    Part No. 34014
    • RJ12 Cable 6P6C
    • RJ12 Male (6 pin) to RJ12 Male (6 pin)
    • Flat Cable 6 core, Connection 1:1
    • Used for telecommunication connections
    • 10 year warranty

     

    The Lindy RJ12 Cable is a high-quality cable that allows users to connect telecommunication devices with a

    RJ12 6/6 Port

     

    The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. 

    The cables are packaged individually in a polybag.

     

    RJ-12 cables are available in lengths from 2m to 50m.

    "
    • Post-assembly boots clip-together over cables with RJ-45 connectors already crimped on
    • For cable diameters up to 6mm
    • Great for identification at patch panels
    Part No. 60388
    • Post-assembly boots clip-together over cables with RJ-45 connectors already crimped on
    • For cable diameters up to 6mm
    • Great for identification at patch panels
    Part No. 60389
    • Post-assembly boots clip-together over cables with RJ-45 connectors already crimped on
    • For cable diameters up to 6mm
    • Great for identification at patch panels
    Part No. 60390
    • Post-assembly boots clip-together over cables with RJ-45 connectors already crimped on
    • For cable diameters up to 6mm
    • Great for identification at patch panels
    Part No. 60391
Go to Top