- USB 2.0/OTG Type Micro-B Male to USB 2.0 Type Mini-B Male
- Micro-B is OTG Host connector
- Black cable
- Fully shielded cable with moulded connectors
- 10 year warranty
-
-
Blocks HDMI CEC signals when there is an incompatibility
Use this adapter when you have problems with incompatibilities between IR remote controls; such problems tend to occur now and then in installations with HDMI splitters and -switches.
The adapter does not pass on the CEC signal further. In principle, you only need to use this adapter upstream of the incompatible devices. However, several adapters installed upstream of a number of devices can be used.
- Short adapter HDMI Type A 19 Pole
- 10 year warranty
" -
- USB 2.0/OTG Type Micro-B Male to USB 2.0 Type Mini-B Male
- Micro-B is OTG Host connector
- Black cable
- Fully shielded cable with moulded connectors
- 10 year warranty
-
- IEEE 1394 compliant
- Gold Plated connectors to prevent oxidisation for maximum reliability
- Transparent cable
- Fully moulded
- Lengths available: 0.3m - 20m
- 10 year warranty
-
- USB 2.0/OTG Type Micro-B Male to USB 2.0 Type Mini-B Male
- Micro-B is OTG Host connector
- Black cable
- Fully shielded cable with moulded connectors
- 10 year warranty
-
- IEEE 1394 compliant
- Gold Plated connectors to prevent oxidization for maximum reliability
- 4 pin connector also known as i.Link or DV connector
- Transparent cable
- Fully moulded
- 10 year warranty
Part No. 30869 -
- Allows you to internally attach a Premium Gold cable to our VGA Face Plate
- Post: # 4-40 UNC, 14mm
- Nut: # 4-40 UNC, 5mm
- Each pack contains 10 nuts and 10 posts
Pack of 50 also availablePart No. 66026 -
This high-quality LINDY USB 2.0 cable is fully-compatible with USB 2.0 specifications and is backwards-compatible with previous standards. It supports all data transfer rates up to 480 MBit/sec.- USB 2.0 cable
- Connector: Micro-A connector to type B connector
- Double-shielded cables with moulded connectors
- Lengths from 0.5m to 3m
Part No. 31950 -
Note: Not for use with Dimage A1, XT, XI, X, X2, F3 & F1IMPORTANT: Camera manufacturers use various different connectors depending on make and model. Before ordering this cable, please ensure that the female connector on your camera corresponds to the male connector end-view as shown in the picture above.Part No. 31679 -
- Internal Data and power cable
- SATA 7 Pin + 9 Pin Male to SATA 7 Pin + 15 Pin SATA power connector, 0.3m
- 10 Year warranty
Part No. 33636 -
- IEEE 1394 compliant
- Gold Plated connectors to prevent oxidization for maximum reliability
- 4 pin connector also known as i.Link or DV connector
- Transparent cable
- Fully moulded
- 10 year warranty
Part No. 30871 -
- Gold Plated connectors to prevent oxidization for maximum reliability
- IEEE 1394b compliant
- Fully moulded
- 4 pin connector also known as i.Link or DV connector
- Color: Transparent
- Length: 1m
- 10 year warranty
Part No. 30785 -
Platinum Tools Strain Relief Boot, For Use w/EZ-RJ45/ezEX-RJ45 Cat6, Clear, 50pc -
HDMI 270 Degree Port Saver Adapter - Up, HDMI Type-A Male to HDMI Type-A Female, 4K 60Hz, Black -
HDMI 90 Degree Port Saver Adapter - Down, HDMI Type-A Male to HDMI Type-A Female, Black -
Stinger, Metallic Finish Stereo Earbuds w/ Microphone, Nylon Braided Cloth Cord, 4 foot, Silver -
Stinger, Metallic Finish Stereo Earbuds w/ Microphone, Nylon Braided Cloth Cord, 4 foot, Gold -
Stinger, Metallic Finish Stereo Earbuds w/ Microphone, Nylon Braided Cloth Cord, 4 foot, Black -
Platinum Tools Phone / Data RJ22 Crimp Connectors for Flat Cable, 4P4C, 100 Pieces/JarPart No. 106103J -
Platinum Tools Phone / Data RJ22 Crimp Connectors for Flat Cable, 4P4C, 500 piecesPart No. 106100 -
Modular Adapter, Gray, DB25 Male to RJ12Part No. 31D3-36210 -
Modular Adapter, Gray, DB9 Female to RJ12 JackPart No. 31D1-16410 -
Modular Adapter, Gray, DB9 Male to RJ12 JackPart No. 31D1-16210 -
2 PC to 1 USB Device, Manual Switch. USB2.0Part No. 40U1-01002 -
-
-
-
- Post-assembly boots clip-together over cables with RJ-45 connectors already crimped on
-
- For cable diameters up to 6mm
-
- Great for identification at patch panels
Part No. 62247 -
-
- 10 pack
- Crimp type
Part No. 62202 -
- 10 pack
- Crimp Type
Part No. 62201 -
5 packPart No. 62051 -
- 10 pack
Part No. 62050 -
- Post-assembly boots clip-together over cables with RJ-45 connectors already crimped on
- For cable diameters up to 6mm
- Great for identification at patch panels
Part No. 60391 -
- Post-assembly boots clip-together over cables with RJ-45 connectors already crimped on
- For cable diameters up to 6mm
- Great for identification at patch panels
Part No. 60390 -
- Post-assembly boots clip-together over cables with RJ-45 connectors already crimped on
- For cable diameters up to 6mm
- Great for identification at patch panels
Part No. 60389 -
- Post-assembly boots clip-together over cables with RJ-45 connectors already crimped on
- For cable diameters up to 6mm
- Great for identification at patch panels
Part No. 60388 -
- 5 Slots for over 80 types of memory cards
- Slot 1: Compact Flash
- Slot 2: Memory Stick
- Slot 3: SD & Mini-SD
- Slot 4: MicroSD & TransFlash
- Slot 5: xD
- Supports maximum of SDHC 32GB
- Dedicated SIM Card Slot
- High speed USB 2.0 data transfer rate up to 480Mbit/s
- Integrated USB A plug
- USB Extension Cable (AM-AF), approx. 90cm
- Supports PC & Mac* Software to edit the data stored on the SIM card
- Dimensions: 67 x 40 x 13mm (WxDxH)
*SIM maps are not supported by MacPart No. 42982 - 5 Slots for over 80 types of memory cards
-
- Installs into a standard 3.5" floppy drive bay and connects to the motherboard's USB connection
- USB 2.0 interface, backwards compatible with USB 1.1
- Supplied with 3 mobile data trays
- 2.5" IDE HDD Enclosure (drive not included)
Part No. 42977 -
- USB 2.0 to Fast Ethernet Adapter (also known as a USB to Cat5 / USB to RJ-45 adapter)
- Converts a USB 2.0 port into an auto-sensing 10Base-T or 100Base-TX Fast Ethernet port
- Easy plug & play installation
- Backwards compatible with USB 1.1 and 1.0 host controllers
- Both full and half duplex modes supported
- Bus-powered from USB port
- Activity LED
- Compatible with ME/2000/XP/Vista/7/8, Mac OS X, Linux
- 2 year warranty
Part No. 42974 -
The USB 2.0 Audio Adapter is designed to take your standard USB 2.0 port and convert it to a headphone jack, speaker jack or mic jack so you can listen to music, play games, watch movies or video chat. It offers Virtual 7.1 surround sound, which is activated with the supplied software (Windows XP, Windows Vista and Windows 7 only). It has two 3.5-millimeter jack sockets that can be used for headphones, speakers and microphones and is equipped with a handy console with volume and mute buttons so you can adjust the sound from the module. Use this USB audio adapter on Mac or Windows.
Part No. 42961 -
- This cable works in conjunction with Vista's 'Windows Easy Transfer' software to quickly and easily copy data between two computers. It's ideal for XP users who have purchased a new Vista equipped PC and need to transfer their email messages and settings, program data, photos, files etc. It's also especially useful in an IT support environment as a link between two Vista PCs to copy files and settings.
-
- Works automatically with Vista's built-in 'Windows Easy Transfer' software
-
- Allows connection between an XP PC and a Vista PC, or between two Vista PCs
-
- Much neater, more convenient solution than using CDs, DVDs, Flash Drives or external hard drives to transfer data
-
- Very quick and easy to setup and use; allows you to transfer:
-
- User accounts
-
- Files and Folders
-
- Email messages, settings and contacts
-
- Photos, music and videos
-
- Program data, files and settings
-
- Internet settings
-
- USB 2.0 compliant
-
- Compatible with Windows XP/Vista and 7
-
- Length: 2.6m
Please note:- This cable can be used to connect a Vista PC to either an XP PC or another Vista PC only. It cannot be used to connect two XP PCs together.
Part No. 42951 -
-
More InformationThis card reader supports the following memory cards:Compact Flash (CF), Micro Drive (MD), Smart Media (SM), xD Picture Card (xD), MultiMediaCard (MMC), MMC Plus, Secure Digital (SD), Secure Digital High Capacity (SDHC), High Speed SD, Memory Stick (MS), High Speed MS, MS-Pro, High Speed MS-Pro, Mini SD, MS Duo, MS Pro-Duo, RS-MMC, MMC mobile, T-Flash*, MMC-ROM, MMC Plus ROM, MMC Mobile ROM, MS ROM, MS-Pro ROM, SM ROM* An adapter is required which is not included. Usually supplied with the memory card.Part No. 42939 -
- Ideal for USB printer sharing
- Combine with a USB hub to share multiple devices e.g. printers, scanners, etc.
- "Plug & Play"
- Supports high speed (480Mbit/sec), full speed (12Mbit/sec) and low speed (1.5Mbit/sec)
- Bus-powered with no external power supply required
- Electronic switching via push button or from the PC keyboard hotkeys (hotkey switching is not available for Mac and SUN computers)
- Connectors: 1 x USB Type A Female (USB Device) and 4 x USB Type B Female (Computer)
- Maximum cable lengths: 2m (input), 2m (output)
- A Type A to Type B USB cable (not included) is required for each computer and device connection
- Compatible with Windows 95(OSR2.1)/98/ME/2000/XP/Vista, Mac OS 8.6 to 9.2 & 10 and SUN computers
2 Port USB 2.0 Switch also availablePart No. 42904 -
- Connects to any serial RS422 device via USB Type A
- 9 Way D Male to USB A Male connectors
- Plug & Play - USB bus-powered with no external power supply required
- Compatible with Windows, Mac and Linux operating systems
- 2 year warranty
The Lindy USB to Serial Converter allows simple connection of peripheral devices featuring 9 Way Serial RS422 to a USB Type A port. With both USB Type A and serial connectors, this device is a perfect solution for connecting legacy RS422 equipment such as barcode scanners and industrial devices to notebooks and Macbooks, in retail, IT and digital signage scenarios.
This converter is compatible with Windows, Mac and Linux operating systems. It supports hot-swapping so the user can quickly switch serial devices without shutting down their computer. The converter is USB bus-powered, it can be installed quickly and simply with no need for additional power supplies.
" -
Print from your USB ready PC to a parallel printer! This USB to Parallel adapter allows any Windows compatible PC with USB support to print to any bi-directional printer equipped with a 36 way Centronics Female parallel port.Part No. 42813 -
- Extends a single USB port up to 50m using low cost Cat.5/5e/6 network cable (not included)
- Supports data transfer rates of up to 12Mbps
- Plug and Play Installation, OS independant
- Powered by the USB Bus
- 2 year warranty
The Lindy Cat.5 USB Extender can be used to extend the distance between a USB device and a host computer by up to 50m. It consists of a local unit, which can be connected to the computer or laptop and a remote unit which connects to USB devices including webcams and storage devices, perfect for long distance access to files or in video conferencing scenarios.
Standard, low cost Cat.5e/6 cable (not included) is used to connect the two units together. For best performance and compatibility, we recommend the use of solid core patched cables.
A power supply can be connected optionally for use with high current USB devices.
" -
- Easy to install smart card reader compatible with a variety of computer operating systems
- Supports smart card operations for digital signature, authentication security etc.
- Compatible with corporate ISO 7816 smart card applications
- USB 2.0 High Speed data rates up to 480Mbps
- 2 year warranty
The Lindy USB 2.0 Smart Card Reader makes it easy to manage a variety of smart cards from a Windows or Mac computer with a USB Type A interface. It supports relevant industry standards like ISO 7816 or PC/SC 1.0/2.0 and multiple smart card protocols. Possible applications can include e-banking, e-payment, digital signature, authentication security, e-government etc.
The Lindy USB 2.0 Smart Card Reader is powered by the USB Bus and easy to install and use. Simply install the smart card driver from the Lindy website, then connect the reader to the PC and plug in the smart card.
" -
- Compliant with USB 2.0 specification
- Can be used as mirror or extended desktop
- Resumes from hibernation and suspend modes
- Supports up to 6 additional connections
- DisplayLink Chipset
- Easy to install - no need to open the computer case
- Supports resolutions up to 1080p (see full list below)
- Bus powered
- Compatible with Windows 2000/XP/Vista/ 7 (32/64bit) & 8, Mac OS 10.4
- 2 year warranty
Part No. 42744 -
- Supports DVI and VGA Displays
- USB 2.0 Compliant (USB 1.1 not supported)
- Up to 6 adapters can be connected to one PC
- Bus Powered
- Displaylink chipset
- Supports Resolutions up to 2048 x 1152 (32 Bit)
- Supports video playbck up to 1080p
- Requires a minimum 1.2GHz single core processor
- Supports up to 6 USB displays simultaneously
- Hot plug: easily add or remove displays without the need for system reboot
- Windows XP/Vista/7/8 compatible
- 2 year warranty
Part No. 42728
