TV Wall Plate with 1 F-pin Coupler, 3GHz White

• Connects a legacy PSU to a newer SATA device
• Supports the connection of modern SSDs, HDDs and Blu-Ray disc drive.
• 5.25" Male Power (LP4) to 15 pin Female SATA Power, 90° angled
• Perfect for DIY PC builders and in-house technical teams
• 10 year warranty

The Lindy Power Adapter Cable is a high-performance adapter, allowing users to connect SATA drive with standard 5.25" (LP4) connectors. Perfect for DIY PC builders and in-house technical teams this adapter cable allows the user to connect a legacy PSU to two newer SATA devices such as a SSD, HDD or Blu-Ray disk drive.

“

This white 1.25 inch raceway piece serves as an end cap to cap the end of a cable raceway. This covers both aesthetics, protection and cleanliness. It will prevent ends from being hit and possible chipped or cracked and it will keep unwanted dust bunnies (junk) out of your runs. Use surface mount cable raceways to protect and tidy up cable runs around the home or office where running through walls is not possible or practical. These raceways are useful for nearly any type of cable from phone, network, USB, VGA, Audio/Video, Speaker and more. Some sample applications would be: office cubicles where walls are not available or the working space can change configuration or in the existing home where one wants to install surround speakers and hide/protect the speaker cables/wires.

• Speed: Up to 921Kbit/sec
• Card Connector: 4 x 9 Way D Male (via breakout cable)
• Supports PCI Express Specification Revision 1.1
• Built-in 128K byte DMA software FIFO

• Software Compatability: Windows 2000/XP/Vista/Windows 7/Server 2003, 2008, Linux

• 2 Year Warranty

• Bus Type: 32 Bit PCI
• Speed: Serial ATA-150
• I/O Address: “Plug & Play”
• IRQ Selection: “Plug & Play”
• Internal Connector: 2 x SATA Female
• Supports 2 independent Serial ATA channels
• Supports Serial ATA 1st Generation Data Rates 1.5Gb/s
• Compliant with PCI specifications, Revision 2.2 (5V & 3.3V)
• Integrated PCI DMA engines
• RAID Function Level 0 and 1 (Mirror and Stripe Set)
• Standard and Low Profile PC Back Plates included
• Software Compatibility: Windows 98SE/ME/2000/XP/Vista/Windows 7/8/Server 2003, 2008

Cat5e Ethernet cables of the 50 foot length have a variety of uses. These cables will provide a greater reach for those situations that require more serious distances. These Ethernet Cables are great for the home office or any other environment. This particular cable is a white UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.

This 50-foot Category 8.1 cable, Class I channel, features a purple PVC jacket, braided outer shield, with four individually mylar foil shielded 24 AWG pure copper pairs as defined in ISO/IEC 11801 and ratified in ANSI/TIA 568-C.2-1. Cat8 cabling was designed primarily for high-speed data centers where switches, servers, and other network hardware are located in close proximity. This newest copper communications cable offers greater flexibility both literally and in distances when compared to QSFP+ and Twinax DAC assemblies which typically cost significantly more and are often much more limited in scope. It has the reach to cover Top-of-Rack and End-of-Row or Middle-of-Row network topologies while delivering 10, 25, and 40 Gigabit data rates over BASE-T technology with RJ45 ends making it a drop-in replacement for Cat6a where rates beyond 10Gb will be needed today or in the future. Cat8 has stricter specifications for noise restriction and crosstalk than any of its predecessors. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat8 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. Each pair of conductors is shielded with an aluminum mylar foil to reduce, if not eliminate, crosstalk. These cables also have a braided shield, which protects from outside electromagnetic interference.

This 10 foot PS/2 (MiniDin6) extension cable is designed to work with keyboards and mice that utilize the MiniDin6 connector. Our cable features PS/2 (MiniDin6) male and female ends and 6 conductors with straight through pinning. Before the USB connection established its dominance connecting devices to a computer, the PS/2 connector was the primary method to secure a mouse or keyboard.

This high-quality LINDY USB 2.0 cable is fully-compatible with USB 2.0 specifications and is backwards-compatible with previous standards. It supports all data transfer rates up to 480 MBit/sec.

• USB 2.0 cable

• Connector: Micro-A connector to type B connector

• Double-shielded cables with moulded connectors

• Lengths from 0.5 m to 3m

Important! Manufacturers use different interfaces on their products. Make sure your device has the standard USB connections

Armored Cat6a Copper Ethernet Cable, Anti-Rodent, 10 Gigabit, 24AWG, POE Compliant, 500MHz, POE Compliant, 10 foot

This beige single gang Keystone wall plate features spaces for up to 2 keystones. You can mix and match keystones to create any combination of connections at the point of entry in a clean professional manner. Common usage may include networking, home theater, audio/video systems, projectors and general work areas. The wall plate does the job of allowing for easy interchange of connections and aesthetics.

Our blue plenum solid Cat6a Ethernet cable is used for networking and phone infrastructure and comes in a convenient spool. Cat6a Cable is used in network applications and has been designed specifically for 10 Gigabit Ethernet applications. This particular cable is a plenum rated blue UTP (Unshielded Twisted Pair) bulk cable. The individual conductors are 23 AWG (American wire gauge) solid pure copper. Our Cat6a Ethernet cable exceeds the EIA/TIA-568-C standard. In a typical residential environment, an in-wall rated cable will suffice. However, commercial installations of cabling will have more requirements. In commercial buildings, there will be an area between floors or above office areas for heating/cooling airflow called the Plenum. If an office were to catch fire, this plenum area could easily allow the spread of the fire to more floors or across the entire building. Cables that do not have a jacket rated for in wall or plenum use could actually cause the fire to become more intense. Plenum rated cables are jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP) for less toxicity during a fire. If a fire gets into a plenum rated area that contains plenum rated cables and the fire spreads, the cables will not be to blame.