This 3 meter (~10 feet) fiber optic cable is terminated with a LC (Lucent Connector) connector on one end and a SC (Subscriber Connector) connector on the other end. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)

This 5-foot Category 8.1 cable, Class I channel, features a white PVC jacket, braided outer shield, with four individually mylar foil shielded 24 AWG pure copper pairs as defined in ISO/IEC 11801 and ratified in ANSI/TIA 568-C.2-1. Cat8 cabling was designed primarily for high-speed data centers where switches, servers, and other network hardware are located in close proximity. This newest copper communications cable offers greater flexibility both literally and in distances when compared to QSFP+ and Twinax DAC assemblies which typically cost significantly more and are often much more limited in scope. It has the reach to cover Top-of-Rack and End-of-Row or Middle-of-Row network topologies while delivering 10, 25, and 40 Gigabit data rates over BASE-T technology with RJ45 ends making it a drop-in replacement for Cat6a where rates beyond 10Gb will be needed today or in the future. Cat8 has stricter specifications for noise restriction and crosstalk than any of its predecessors. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat8 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. Each pair of conductors is shielded with an aluminum mylar foil to reduce, if not eliminate, crosstalk. These cables also have a braided shield, which protects from outside electromagnetic interference.

Our 25 foot Cat3 telco trunk cable features two 90 degree Amphenol connectors and 25 twisted pairs. Use these cables to bridge telephone based switch boards and equipment require a Centronics 50 (CN50) type Amphenol connector. 25 twisted pair cables are typically used with 66 type blocks in telephone (distribution and routing) applications.

Cat6 Ethernet cables of the 50 foot length have a variety of uses. These cables will provide a greater reach for those situations that require more serious distances. These Ethernet Cables are great for the home office or any other environment. Cat6 cables are used for networking, data transfer, and phone lines. Cat6 Cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a purple UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat6 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat6 Ethernet patch cables exceed the EIA/TIA-568-C standard.

Cat5e Ethernet cables of the 4 foot length are typically used to connect a Cable or DSL modem to a router/switch in the home or office or for particularly long patch panel runs inside server/network rooms. Though you may find many uses for such a length. This particular cable is a gray UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.

2 Fiber Indoor/Outdoor Fiber Optic Cable, Multimode 50/125 OM3, Corning, 10 Gbit, Black, Riser Rated, Spool, 2000 foot

Use this 100 foot 1/4 inch mono audio extension cable to extend the length of existing 1/4 inch mono cabling. This cable is compatible electric or electronic instruments such as the electric guitar, electric bass, synthesizer, electric piano, or electronic drum machines as well as equipment such as amplifiers, loud speakers and distortion pedals and other signal processors. This cable features a spiral shield for EMI rejection and durable, molded PVC connectors to ensure a lifetime of usage.

• Ideal for situations where space is limited such as in-car AV installations
• Gold plated pins and connectors
• HDMI CAT1 & CAT2 compatible
• Internally shielded with copper foil
• 1080p, CEC and HDCP compliant
• 10 Year Warranty

Our Polymer Base plate includes a rare earth magnet with 26 pounds of pull force for easy deployment in any area with metal they can be placed on. The polymer base is more rugged than plastic and features many holes designed to support several methods of attachment. One can glue, stitch-tie, staple, screw, or rivet heavier objects to it. This variety has a magnet inset for a flat application. The dimensions of this product are 1.2 x 2 inches and an overall thickness of 1-4 inches.

• 3 x Philips drivers:
• #00 x 50mm
• #0 x 50mm
• #1 x 50mm
• 4 x Flathead drivers:
• 1.6mm x 50mm
• 2.0mm x 50mm
• 2.4mm x 50mm
• 3.0mm x 50mm

“

Simply45 Cat6 Pass Through RJ45 Crimp Connectors, Solid 23AWG/Stranded 26-24AWG, Green Tint, Clamshell 50 pieces

• Switch between two DisplayPort 1.2 compatible signals with a simple button push
• Supports high definition video up to 4K@60Hz, multi-channel digital audio, DPCP and HDCP 
• Supports resolutions up to 3840 x 2160
• Supports Dual Mode DisplayPort
• 2 year warranty

This DisplayPort Switch allows you to choose between two sources with a simple push of a button. With full support for 4K UHD the switch supports video resolutions up to 3840 x 2160 with multi-channel digital audio.
Easy to install and easy to use, the LINDY DisplayPort Switch is an obvious choice for switching between two DisplayPort sources.

Please Note – Audio may not be supported when using DisplayPort to HDMI adapters.

Package Contents:

1x 2:1 DisplayPort Switch