Cat6 Keystone Jack, Red, RJ45 Female to 110 Punch Down

Cat6 Keystone Jack, Orange, RJ45 Female to 110 Punch Down

Cat6 Keystone Jack, Beige/Ivory, RJ45 Female to 110 Punch Down

Cat6 Keystone Jack, Green, RJ45 Female to 110 Punch Down

Cat6 Keystone Jack, Blue, RJ45 Female to 110 Punch Down

Cat6 Keystone Jack, Black, RJ45 Female to 110 Punch Down

Cat5e Keystone Jack, Black, RJ45 Female to 110 Punch Down

Security/Alarm Wire, Gray, 22/4 (22AWG 4 Conductor), Solid, CMR, Pullbox, 1000 foot

• High performance hub with active cable that provides an extended 10m connection between a computer and up to 4 USB 3.0 devices
• Can be used standalone or as part of the Lindy Active Extension System Pro to create bespoke extension systems of over 40m (depending on the cable configurations used)
• Supports the full USB 3.0 SuperSpeed bandwidth for speeds of 5Gbps
• Easy to use – connects to the device’s existing USB cable (5m maximum)
• 2 year warranty

The Lindy USB Active Extension Hub Pro is a high performance hub with active cable that allows access to four USB 3.0 SuperSpeed peripherals over long distances. With support for data transfer speeds of up to 5Gbps this extension hub is perfect for transferring large data volumes quickly and reliably.

This 10m extension hub can be used standalone or as part of the Lindy USB 3.0 Active Extension System Pro. This system is a modular solution that can combine multiple USB Active Extension Pro cables and a USB 3.0 Active Extension Pro hub to distribute USB signals to up to 4 devices at up to about 40m (depending on the cable configurations used).

Please note that only the USB 3.0 Active Extension Pro 8m (Nr. 43158) or 15m (Nr. 43229) can be connected directly to your computer. If you are creating an extension using multiple units from the Extension Pro System then the first unit must always be the USB 3.0 Active Extension Pro 8m (Nr. 43158) or 15m (Nr. 43229). Once the first cable has been connected, you can then cascade further cables to achieve a maximum distance of 40m. The final part of the extension can be any of the three parts of the Extension Pro System. If you need to extend multiple devices or if you connect a USB device with high power requirement, then you should use the 10m Hub Pro unit (Nr. 43159) with it’s power supply as the final part of the extension.

This cable features industry-proven active technology and locking connectors to ensure full signal integrity in the most demanding environments.

Information about USB 3.0, 3.1 & 3.2

USB 3.0, USB 3.1 and USB 3.2 PCs, cables and devices are all compatible with each other, when using either a USB Type A or USB Type C host interface.
USB 3.0, USB 3.1 Gen 1 and USB 3.2 Gen 1 all support data transfer rates up to 5 Gbps.
USB 3.1 Gen 2 and USB 3.2 Gen 2 both support data transfer rates up to 10 Gbps.

“

20m Premium Super Long Distance DVI-D Extension Cable

• 4 x Voice or Token Ring devices to 1 port

• Only for analogue telephone lines, not VoIP, LAN

• Must be used in pairs by connecting one to a patch panel and the other to a wall outlet

• Low cost solution for adding extra connections
• Existing installations can be expanded quickly and simply
• Additional devices can easily be added temporarily or permanently
• No performance loss
• Saves adding additional cable runs
• Ideal for existing installations where additional cables cannot be installed easily

“

Premium cable for use with USB OTG devices.

• USB 2.0/OTG Type Micro-B Male to USB 2.0 Type Micro-B Male

• Red Micro-B is the OTG Host connector

• Black cable

• Fully shielded cable with moulded connectors

• Cable length: 1m

• 10 year warranty

“