• USB 3.0 SuperSpeed compliant
• Full Duplex cable capable of transfer rates up to 5 Gbps

• Upgraded 99.99% OFC copper conductors
• Double shielded construction
• Fully moulded

• USB Type A Male to USB Type A Male
• Length: 2m
• 10 year warranty

Rackmount Vented Eco Shelf, 19 inch Rack 14 inch deep, 2U. The 2U 14 inch Vented Component Shelf is one of our medium duty component rack shelves. This shelf has a 50 pound weight capacity and it will easily support LCD monitors, switches, and other non-rackmountable components.The 2U 14 inch Vented Component Shelf has 4 mounting holes per shelf and rounded corners.

Heavy Duty Server Power Extension Cord, Black, C20 to C19, 12AWG/3C, 20 Amp, 2 foot

• Supports Video-mirroring or Extended desktop modes
• Supports HDCP signals
• Supports resolutions up to 1080p & 1920 x 1200
• Supports 8/10/12 bit Color depths
• Plug & Play – no drivers to install
• For use with Thunderbolt & Mini DisplayPort equipped computers
• Bus powered
• Color: White
• 2 years warranty

LGX Compatible Adapter Plate featuring a Bank of 6 Multimode Duplex LC Connectors in Beige for OM1 and OM2 applications, Black Powder Coat. All CableWholesale LGX Styled Adapter Plates are easy snap-in mounting in our Rack and wallmount enclosures. Available in black powder coat. Details

• 6 Multimode Duplex LC Connectors
• Beige for OM1 and OM2 applications
• 5.1 inch (130mm) x 1.13 inch (28.7mm)
• Easy snap-in mounting in our fiber Rack and wallmount enclosures
• utilizes a ceramic alignment sleeve
• Available in black powder coat
• LGX Compatible

• USB Type A Male to USB Type B Male
• Features 28AWG for Data and 26AWG for Power
• Fully moulded
• Length: 0.5m
• 10 year warranty

The LINDY Type A to Type B high quality USB cable complies fully with the USB 2.0 specification allowing data transfer speeds of up to 480Mbit/sec.

Slim Cat6 Ethernet cables of the 20 foot length have a variety of uses and are often run under carpets. These cables will provide a greater reach for those situations that require more serious distances. These Ethernet Cables are great for the home office or any other environment. Cat6 cables are used for networking, data transfer, and phone lines. Cat6 Cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a orange UTP (Unshielded Twisted Pair) patch cable with translucent clear boot (snagless installation) and extra protection for the RJ45 connector and clip. Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk. The connectors are wired to the T568B standard. The individual conductors are 28AWG (American wire gauge) stranded pure copper. Cat6 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat6 Ethernet patch cables exceed the EIA/TIA-568-C standard.

• ADSL splitter used to separate data and voice signals on the DSL line
• Suitable for all phone networks to which the devices can be connected via RJ11 connectors.

“

Hook and Loop Tape, 3/4 inch Wide, Black, 50ft Roll

Cat6a Ethernet cables of the 7 foot length have a variety of uses. These cables will suffice for connecting routers/switches to Cable/DSL modems, computers to routers/switches or even in the server/network room for connecting ports on patch panels. These Ethernet Cables are great for the home office or any other environment. Cat6a was developed to achieve maximum distance of 90 meters for full 10-Gigabit network speeds. This robust spec will afford you the extra headroom across your network that Cat6 can not. The 500 Mhz performance is double that of Category 6 and five times the bandwidth capacity of Category 5e. The extra performance is ideal for Power over Ethernet (PoE) and Voice Over Internet Protocol (VoIP) applications where data loss is audibly and visually seen and heard. The latest draft declares a new measurement for Power-Sum Alien Crosstalk to ensure neighboring pairs do not cause disturbance to the other cables. The cable center isolator maintains strict pair separation optimizing NEXT performance. Our Cat6a patch cables are complete end-to-end solution and are tested for compliance with all EIA/TIA-568-C Category 6 specifications. This particular cable is a yellow UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. Cat6a cable includes a spline and ribbing to help ensure separation between the pairs which limits cross talk. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat6a patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life.

This adapter can be used to join two male DB25 cables together or change the gender of one end. If you have a cable with a DB25 male connector, this adapter would change that into a DB25 female while maintaining whatever pinout was on your original cable.

Cat6 Ethernet cables of the 6 foot length have a variety of uses. These cables will suffice for connecting routers/switches to Cable/DSL modems, computers to routers/switches or even in the server/network room for connecting ports on patch panels. These Ethernet Cables are great for the home office or any other environment. Cat6 cables are used for networking, data transfer, and phone lines. Cat6 Cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a blue UTP (Unshielded Twisted Pair) bootless patch cable. Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat6 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat6 Ethernet patch cables exceed the EIA/TIA-568-C standard.