• Connects a HDMI cable to a HDMI display or device with recessed ports or within limited spaces
• Install at a 90° angle for setup where connection is required in a downward configuration
• Supports resolutions up to 4K UHD 3840×2160@60Hz 4:4:4 8bit
• Compact design, perfect for use in discreet or wall mounted display installations
• 10 year warranty

The Lindy HDMI 90° downward angled adapter is a compact solution for connecting HDMI cables to HDMI displays or devices with recessed ports, or within limited space where cable connector sizing may affect installation. This adapter allows for a 90° connection in a downward direction if ports are situated on the back of the display or PC.

This is an ideal tool within wall mounted digital signage installations, gaming setups or educational spaces, with no lasting impact on a connected cables strain relief or lifespan. In installations where the cable connection is frequently disconnected and reconnected (e.g. in the area of hardware testing), the adapter can be used to extend the lifespan of the actual ports on the devices.

Please note: it is common for desktop PCs to have HDMI ports function in the opposite configuration. If this is applicable, please check whether this or the opposing adapter (41086) is required.

“

This 35 foot black SVGA Cable has two HD15 male ends and features ferrite beads, coaxial construction and double shielding. Its primary use is for connecting a computer to a computer monitor for video display. The ferrite beads/cores are small iron oxide alloy cylinders wrapped around the ends of the cable. They are used to suppress EMI/RFI electronic noise on the cable by absorbing the unwanted high frequencies and dissipating them. The coaxial construction and double shielding work to further suppress noise, delivering you the best picture possible. Our SVGA video cables can handle the lowest resolutions used on computer monitors today all the way up to a maximum of 2048 x 1536.

• Extends S-Video and Stereo L + R audio over CAT5e or higher cable
• Consists of a transmitter and receiver unit
• Very easy to install – simply connect the cables
• No power supply required
• Supports transmission distances of up to 300m*

Cat5e Ethernet cables of the 3 foot length are typically used to connect a Cable or DSL modem to a router/switch in the home or office or for particularly long patch panel runs inside server/network rooms. Though you may find many uses for such a length. This particular cable is a green UTP (Unshielded Twisted Pair) bootless patch cable. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.

• 25 Way D Male to 2 x 6 Pin Mini DIN Male & 1 x HD15 Male to 2 x 3.5mm Stereo Jack Male
• PS/2 connectors are PC99 Color coded
• Innovative locking method
• Reduces cable clutter and tangle
• Reduces the number of cables required by a third making the final solution neat and tidy
• Mouse and keyboard connectors are clearly marked at each end to avoid confusion
• High quality triple shielded S-VGA video cable for optimal video performance
• 10 year warranty

Security/Alarm Wire, White, 18/2 (18AWG 2 Conductor), Stranded, CMR / Inwall rated, Pullbox, 500 foot

Cat6 Ethernet cables of the 1.5 foot length are typically used in server/network rooms for plugging between patch panels. This is not to say one cannot use them for other purposes such as connecting a Cable or DSL modem to a router/switch in the home or office. Cat6 cables are used for networking, data transfer, and phone lines. Cat6 Cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a orange UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat6 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat6 Ethernet patch cables exceed the EIA/TIA-568-C standard.

Box of 20 – 1.75 inch Surface Mount Cable Raceway, Ivory, Straight 6 foot Section

This Aqua Blue jacketed 15 meter (~49 feet) 10 gigabit rated fiber optic cable is terminated with LC (Lucent Connector) connectors on both ends. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)

Armored 6 Strand Indoor Fiber Optic Distribution Cable, OS2 9/125 Singlemode, Corning Optical Fiber, Riser Rated, Yellow, Spool, 500 foot

This surface mount phone jack comes with a flat piece of adhesive that enables it to be attached directly to the wall without the need of tools.

This 5 meter (~16 feet) fiber optic cable is terminated with a SC (Subscriber Connector) connector on one end and a ST (Straight Tip/Bayonet Connector) connector on the other end. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. (Not for Home Theater)