• 1000Base-T (copper) to 1000Base-SX/LX (fiber)

• Standards: IEEE 802.3, 802.3u, 802.3x
• Connectors: LC (fiber), RJ-45 (copper)

• fiber Type: Multi-mode

• Maximum fiber cable distance – 550m using 50/125µm multi-mode cable, 220m using 62.5/125µm multi-mode cable

• Network data transfer rate: 2000Mbps (Full-duplex)
• Auto MDI-X support for RJ-45 port connection
• Status LED for Speed, Link/Activity, Full-duplex, Power
• External power supply 5V DC, 2A
• Dimensions: 74 x 102 x 22mm (WxDxH)

“

Shielded Security/Alarm Wire, Gray, 18/4 (18AWG 4 Conductor), Stranded, CM / Inwall rated, Spool, 500 foot

Shielded Plenum HDMI Active Optical Cable, 4K@60, Black, HDMI Male, 75 foot

Plenum MTP Fiber Optic Cable, Type A, 12 Strand, 50/125 OM4, 40/100 Gbps, MTP Female, 15 meter (49.2 foot)

This is a black bulk 1000 foot spool of indoor/outdoor plenum rated fiber optic distribution cable intended for long distance runs at high speeds. It is composed of 6 singlemode fibers (9 micron core) inside a water blocking Aramid yarn wrapped in a black PVC outer jacket. Single mode fiber is optimized to work with fiber optic equipment using light wave lengths of 1310nm (nanometers) or 1550nm. The cladding diameter is 125 microns. The core and cladding of our black bulk indoor/outdoor fiber optic cable is constructed using a high quality singlemode fiber that is ITU-T G.652.D compliant and backwards compatible with other legacy singlemode fibers. This particular cable is Plenum Rated. Plenum spaces are the area between floors or above office areas for heating/cooling airflow. If an office were to catch fire, this plenum area could easily allow the spread of the fire to more floors or across the entire building. Plenum rated cables are jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP) for less toxicity during a fire.

6 Fiber Indoor Distribution Fiber Optic Cable, Multimode, 62.5/125, Orange, Riser Rated, Spool, 1000 foot

• Provides a convenient and secure method of remotely locating workstations or servers without compromising convenience and control
• Distances of up to 300m supported between local and remote units
• Dual console operation – control your computer / KVM Switch from both local and remote locations
• High-resolution video support: 800 x 600 @ 300m; 1600 x 1200/1680 x 1050 @ 200m
• Easy, user-friendly installation – no special software required
• 2 Year warranty

ProSeries Pass Through Cat6/6a UTP Starter Kit, 1ea (S45-1700P, S45-C101, S45-801, S45-S01YL , S45-B002)

Fiber Distribution Panel Enclosure, Rack Mount, 2RU, 6 Plate/Cassette Openings

Our 75 foot black HD15 video cable with a 3.5mm Stereo Audio cable built in, more commonly referred to as a SVGA male to male cable with audio, is typically used to connect a computer to a computer monitor. Our SVGA video cables can handle the lowest resolutions used on computer monitors today all the way up to a maximum of 2048 x 1536. Plus this cable is double shielded to extend your video and audio signals without distortion or signal loss. This cable also features a plenum (CMP) rated jacket. This means the plastics used to create the jacket are designed to burn less than non-plenum rated cables thus reducing the chances for fires to be spread. This cable meets the strictest requirements for any building codes.

This is an aqua bulk 1000 foot spool of plenum fiber optic distribution cable intended for large installations of short range runs at 10 Gigabit speeds. It is composed of 2 multimode fibers (50 micron core) inside an Aramid yarn wrapped in a aqua PVC outer jacket. Multimode fiber is optimized to work with fiber optic equipment using light wave lengths of 850nm (nanometers) or 1300nm. The cladding diameter is 125 microns. The Graded-Step core and cladding of our aqua bulk 50/125 distribution fiber optic cable is constructed using a high quality multimode fiber that is compliant with TIA/EIA 455-220A and IEC 60793-1-49. It also maintains compliance with legacy and LED based systems per TIA/EIA 455-204 and IEC 607-1-41. This particular cable is Plenum Rated. Plenum spaces are the area between floors or above office areas for heating/cooling airflow. If an office were to catch fire, this plenum area could easily allow the spread of the fire to more floors or across the entire building. Plenum rated cables are jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP) for less toxicity during a fire.

2U Fiber Optic Patch Panel, Capacity 6 LGX Adapter Plates / Cassettes / Modules, Unloaded, Lexan Front Door, Black Powder Coat. Our 2U Fiber Optic Patch Panel provides many flexible fiber patching configurations in a 2U form factor. It accommodates up to 6 LGX adapter plates, MPO break modules, or splitter cassettes. Slide out trays and removable front and back doors allow easy access to the patch bay. Multiple cable retention brackets and tie down spots allow for convenient cable management. Spring-loaded stop latches keep the tray securely in place when retracted. This enclosure installs into a standard 19-inch rack and includes non-flush brackets. Adapter plates, 23 inch mounting brackets and 19 inch flush mounting brackets are sold separately. Slide-Out Patch Panel Enclosures are designed for both high and low density patching and splicing applications. Constructed from durable 14 gauge aluminum, these enclosures are lightweight and rugged. Cable organization features include may slack management spools, cable routing rings and tie down bridge stances. All our fiber rack mount enclosures fit standard 19 inch racks and cabinets. Details

• Slide Out Tray with Spring Loaded Stop Latch
• Holds 6 LGX Adapter Plates, Cassettes, or Modules
• Multiple Tie Downs and Cable Retention Brackets
• Hinged Front and Rear Removable Doors
• Transparent Lexan Front Door
• Rugged 14 Gauge Aluminum, Black
• Dimensions: 17in W x 14in D x 3.5in H