This is a black bulk 1000 foot spool of indoor/outdoor rated Plenum fiber optic distribution cable intended for large installations of short range runs at 10 Gigabit speeds. It is composed of 6 multimode fibers (50 micron core) inside a water blocking Aramid yarn wrapped in a black PVC outer jacket. Multimode fiber is optimized to work with fiber optic equipment using light wave lengths of 850nm (nanometers) or 1300nm. The cladding diameter is 125 microns. The Graded-Step core and cladding of our black bulk 50/125 indoor/outdoor fiber optic cable is constructed using a high quality multimode fiber that is compliant with TIA/EIA 455-220A and IEC 60793-1-49. It also maintains compliance with legacy and LED based systems per TIA/EIA 455-204 and IEC 607-1-41. This particular cable is Plenum Rated. Plenum spaces are the area between floors or above office areas for heating/cooling airflow. If an office were to catch fire, this plenum area could easily allow the spread of the fire to more floors or across the entire building. Plenum rated cables are jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP) for less toxicity during a fire.

• Distribute signals across 4 DP displays
• Supports resolutions up to 2560×1600
• Supports digital audio pass-through
• Metal housing
• 2 Year Warranty

The Lindy 4 Port DisplayPort 1.1 Splitter is a high-end solution for sharing DP signals across 4 displays.

Supporting resolutions up to 2560×1600, this splitter is ideal for use in premium DP distribution setups when providing information to a wider audience with greater coverage, such as digital signage in retail or informative displays in university libraries. Digital audio up to 7.1CH is seamlessly passed through for immersive multi-channel audio to support the video content.

“

Armored 12 Strand Indoor Fiber Optic Distribution Cable, 10Gbit, OM3 50/125 Multimode, Corning Optical Fiber, Riser Rated, Aqua, Spool, 500 foot

This user station sends KVM- and audio signals via Cat 5 RJ45 cables. It is used either at the Cat.5 KVM switch MC5/-IP as a user station or as a stand-alone KVM extender with matching Cat.5 KVM module. The KVM switches MC5 and MC5-IP allow you to spatially separate admin workstations via Cat.5 cables. This Cat.5 KVM module is already integrated in the KVM switch.

Plenum Speaker Cable, White, Pure Copper, 14/2 (14 AWG 2 Conductor), 19 Strand / 0.373mm, CMP, Spool, 1000 foot

• Extends digital display signals with absolutely no degradation
• Built-in connector design allows direct connection to source and display
• Supports HDMI resolutions of up to 2160p 30hz
• 3D ready with a Channel bandwidth of 10.2Gbps
• Ideal for home cinema, medical, factory automation, public display installations etc.
• Several different lengths available

• Integrated cable ties can secure the cable to devices, equipment or other cables to prevent it from being accidentally disconnected

• Dimensions: 59.3 x 48 x 25mm (WxDxH)

• 2 year warranty

This Quad Shielded White RG6 cable comes in an easy to use and store 1000 foot pullbox. The cable is constructed of the following: outer jacket made from low smoke PVC, aluminum outer braid (40% coverage), aluminum mylar foil (25% overlap), inner aluminum braid (60% coverage), aluminum mylar foil (25% overlap), foam FEP (fluorinated ethylene propylene) dielectric and an 18AWG solid copper center conductor.

This is a orange bulk 1000 foot spool of plenum fiber optic distribution cable intended for large installations of short range runs at LAN Speeds. It is composed of 6 multimode fibers (62.5 micron core) inside an Aramid yarn wrapped in a orange PVC outer jacket. Multimode fiber is optimized to work with fiber optic equipment using light wave lengths of 850nm (nanometers) or 1300nm. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. The Graded-Step core and cladding of our orange bulk 62.5/125 distribution fiber optic cable is constructed using a high quality multimode fiber that is compliant with TIA/EIA 492AAAA-A, IEC 60793-2-10 and ISO/IEC 111801 (type OM1 fiber). This particular cable is Plenum Rated. Plenum spaces are the area between floors or above office areas for heating/cooling airflow. If an office were to catch fire, this plenum area could easily allow the spread of the fire to more floors or across the entire building. Plenum rated cables are jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP) for less toxicity during a fire.

• Allows you to connect up to 5 devices to a single HDTV display or projector

• Scales any PC (VGA to WUXGA) or HD (480i to 1080p) input resolution to any other PC / HD resolution

• Infra red remote control for easy switching between devices
• On-screen display for ease of use
• HDCP compliant for trouble-free operation
• 2 year warranty

48 Strand Indoor/Outdoor Fiber Optic Cable, OS2 9/125 Singlemode, Corning SMF-28 Ultra, Black, Riser Rated, Spool, 500 foot

2 Fiber Indoor/Outdoor Fiber Optic Cable, Multimode 50/125 OM3, Corning, 10 Gbit, Black, Riser Rated, Spool, 2000 foot

This is an aqua bulk 1000 foot spool of fiber optic distribution cable intended for large installations of short range runs at 10 Gigabit speeds. It is composed of 6 multimode fibers (50 micron core) inside an Aramid yarn wrapped in a aqua PVC outer jacket. Multimode fiber is optimized to work with fiber optic equipment using light wave lengths of 850nm (nanometers) or 1300nm. The cladding diameter is 125 microns. The Graded-Step core and cladding of our aqua bulk 50/125 distribution fiber optic cable is constructed using a high quality multimode fiber that is compliant with TIA/EIA 455-220A and IEC 60793-1-49. It also maintains compliance with legacy and LED based systems per TIA/EIA 455-204 and IEC 607-1-41. This particular cable is Riser Rated (CMR) meaning it complies with UL-1666. It is for usage in vertical tray applications without environmental air. Examples being: cable runs between floors through cable risers or in elevator shafts. These cables self extinguish and prevent the flame from traveling up the cable in a vertical burn test. This fiber optic cable is solidly constructed, UL rated and RoHS Compliant.