Part No. 10W2-01506
-
This 6 foot black FireWire 400 (IEEE-1394a) cable features a 6 pin connectors on both ends. Our cable features thick cable jacketing with a heavy-duty braided shield for protection from abuse and EMI/RFI. FireWire cables are used to transfer data between FireWire enabled devices such as external hard drives, camcorders, DV recorders, digital cameras, etc to computers, laptops and other FireWire capable devices. When selecting your FireWire cable pay attention to pinning of the devices you are connecting to ensure you choose the correct cable for your application. Our FireWire 400 Cables meet the specifications outlined in the IEEE-1394a standard. This means that one can daisy chain up to 63 supported devices on a single FireWire port provided the devices support daisy chaining. The standard supports the following transfer rates: S400 (400 Mbit/s), S200 (200 Mbit/s) and S100 (100 Mbit/s). The 6 pin connector is able to supply power if your device supports powering/charging over FireWire.Part No. 10E3-01106
-
This 6 foot black FireWire 400 (IEEE-1394a) cable features a 9 pin connector on one end and a 6 pin connector on the other end. Our cable features thick cable jacketing with a heavy-duty braided shield for protection from abuse and EMI/RFI. FireWire cables are used to transfer data between FireWire enabled devices such as external hard drives, camcorders, DV recorders, digital cameras, etc to computers, laptops and other FireWire capable devices. When selecting your FireWire cable pay attention to pinning of the devices you are connecting to ensure you choose the correct cable for your application. Our FireWire 400 Cables meet the specifications outlined in the IEEE-1394a standard. This means that one can daisy chain up to 63 supported devices on a single FireWire port provided the devices support daisy chaining. The standard supports the following transfer rates: S400 (400 Mbit/s), S200 (200 Mbit/s) and S100 (100 Mbit/s). The 6 pin connector is able to supply power if your device supports power/charging via FireWire.Part No. 10E3-96006BK
-
Our standard 6 foot RCA extension cable is an economical way to extend your existing RCA cables used for audio and video devices, such as stereo equipment, DVD players, and TVs. This solidly constructed Male to Female RCA extension cable features Copper wiring and fully molded Nickel plated connectors.Part No. 10R1-01206
-
This is an Apple authorized cable that will both sync and charge your apple devices. This 6 foot white cable is MFi certified and is compatible with Apple products that use a Lightning port. The color is classic Apple white. Compatible with: iPhone: 5, 5C, 5S, SE, 6, 6+, 6S, 6S+, 7, 7+ iPod Nano 7G, Touch 5G & 6G iPad w/ Retina, Mini, Mini 2, 3 & 4, Air, Air 2, ProPart No. 10U2-05106WH
-
Our blue 6 foot USB 3.0 SuperSpeed Type A to Type A Male/Male Cables offer the next great leap in data transfer speeds for your devices that require a male A connection. Some routers and USB hard drives use these type of cables. The 3.0 specification boasts amazing performance improvements that will allow consumers and businesses to get more done in less time, while still supplying full backwards compatibility with previous USB versions. USB 3.0 SuperSpeed features a 10 fold improvement in signaling rate that translates to 5 Gbps versus the older 480 Mbps (USB 2.0). The new Sync-N-Go technology which minimizes user wait time (devices detect and sync faster). USB 3.0 is bi-directional allowing information transfers in both directions at the same time. Add to this the new support for a new interrupt driven protocol, the device can initiate the transfer, vs the old host based device polling. The old way had the USB controller constantly pinging the device, now the device lets the host know when actions start. Lastly USB 3.0 increases power output from 500 mA to 900 mA for faster charging of attached devices and support of more robust peripherals.Part No. 10U3-02106
-
Our black 6 foot USB 3.0 SuperSpeed extension cables offer the next great leap in data transfer speeds for your devices. These particular USB 3.0 cables feature a Type A Male (Computer/Tablet/Laptop/Hub side) to Type A Female (Device side with Type A Male ended cable). This USB SuperSpeed cable enables the extension of an existing device up to a total of 10 feet without a hub/repeater or up to 60 feet (six cables) with hubs/repeaters. The 3.0 specification boasts amazing performance improvements that will allow consumers and businesses to get more done in less time, while still supplying full backwards compatibility with previous USB versions. USB 3.0 SuperSpeed features a 10 fold improvement in signaling rate that translates to 5 Gbps versus the older 480 Mbps (USB 2.0). The new Sync-N-Go technology which minimizes user wait time (devices detect and sync faster). USB 3.0 is bi-directional allowing information transfers in both directions at the same time. Add to this the new support for a new interrupt driven protocol, the device can initiate the transfer, vs the old host based device polling. The old way had the USB controller constantly pinging the device, now the device lets the host know when actions start. Lastly USB 3.0 increases power output from 500 mA to 900 mA for faster charging of attached devices and support of more robust peripherals.Part No. 10U3-02106EBK
-
Cat6 Ethernet cables of the 6 foot length have a variety of uses. These cables will suffice for connecting routers/switches to Cable/DSL modems, computers to routers/switches or even in the server/network room for connecting ports on patch panels. These Ethernet Cables are great for the home office or any other environment. Cat6 cables are used for networking, data transfer, and phone lines. Cat6 Cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a purple UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat6 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat6 Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X8-04106