Part No. 10W1-02303Y
-
Power two electronic devices with this 13 Amp-rated power Y-cable. Split one C14 plug into two C13 receptacles. This 36 inch(3 foot) cable is an ideal solution for reducing clutter in a data center.The 16 awg conductors are rated to 13 Amps. The cable features an SJT jacket and is UL listed. -
DisplayPort v1.4 Video Cable, 32.4 Gbit/s Data Rate, 8k@60Hz / 4k@120Hz, DisplayPort Male, 3 footPart No. 10H1-70103 -
Computer / Monitor Power Extension Cord, Black, C13 to C14, 14AWG,15 Amp, 3 footPart No. 10W2-02203 -
Computer / Monitor Power Extension Cord, Blue, C13 to C14, 14AWG,15 Amp, 3 footPart No. 10W2-02203BL -
Computer / Monitor Power Extension Cord, Green, C13 to C14, 14AWG,15 Amp, 3 footPart No. 10W2-02203GN -
Computer / Monitor Power Extension Cord, Red, C13 to C14, 14AWG,15 Amp, 3 footPart No. 10W2-02203RD -
Power Cord, C14 to C15 , 14AWG, 15 Amp, UL SJT, Black, 3 footPart No. 10W2-07103 -
USB 3.0 Panel Mount Extension Cable, Type A Male to Panel Mount Female, Black, 3 Foot -
Power Extension Cord, Black, SJT, NEMA 5-15P to NEMA 5-15R, 14 AWG, 3 Conductor, 15 Amp, 3 foot -
This 3 foot black SVGA Cable has two HD15 male ends and features ferrite beads, coaxial construction and double shielding. Its primary use is for connecting a computer to a computer monitor for video display. The ferrite beads/cores are small iron oxide alloy cylinders wrapped around the ends of the cable. They are used to suppress EMI/RFI electronic noise on the cable by absorbing the unwanted high frequencies and dissipating them. The coaxial construction and double shielding work to further suppress noise, delivering you the best picture possible. Our SVGA video cables can handle the lowest resolutions used on computer monitors today all the way up to a maximum of 2048 x 1536.Part No. 10H1-20103 -
Specs- 3 foot length
- C19 to NEMA 5-15P
- 14 awg
- 3 conductors
- Rated to 300 volts
- SJT - Service Junior Thermoplastic
- Black
- Servers, network/medical/professional food equipment, appliances, or any device with a C20 power port./li>
Part No. 10W2-42203 -
Power Y Cord, Black, NEMA 5-15P to Dual NEMA 5-15R, 16AWG, 13 Amp, 3 foot -
Power Extension Cord, Black, Low Profile Right Angle NEMA 5-15P to NEMA 5-15R, 13 Amp, 16 AWG, 3 foot -
Power Cord, C14 to C19, 14 AWG,15 Amp, Green, 3 foot -
This 3 foot black FireWire 800 (IEEE-1394b) cable features a 9 pin connector on both ends. Our cable features thick cable jacketing with a heavy-duty braided shield for protection from abuse and EMI/RFI. FireWire cables are used to transfer data between FireWire enabled devices such as external hard drives, camcorders, DV recorders, digital cameras, etc to computers, laptops and other FireWire capable devices. When selecting your FireWire cable pay attention to pinning of the devices you are connecting to ensure you choose the correct cable for your application. Our FireWire 800 Cables meet the specifications outlined in the IEEE-1394b standard. This means that one can daisy chain up to 63 supported devices on a single FireWire port provided the devices support daisy chaining. The standard supports the following transfer rates: 3200 Mbit/s (400 megabytes/s) and the older S400 (400 Mbit/s), S200 (200 Mbit/s) and S100 (100 Mbit/s). Lastly the 4 pin connector does not supply power while the 6 pin connector is able to supply power. If your device requires a 4 pin connector it will not be powered/charged via FireWire it will instead use its own separate power.Part No. 10E3-99003BK -
This 3 foot black SVGA extension cable has a HD15 male and a HD15 female end. The cable features ferrite beads, coaxial construction and double shielding. Its primary use is for extending the length of a computer to computer monitor connection for video display. The ferrite beads/cores are small iron oxide alloy cylinders wrapped around the ends of the cable. They are used to suppress EMI/RFI electronic noise on the cable by absorbing the unwanted high frequencies and dissipating them. The coaxial construction and double shielding work to further suppress noise, delivering you the best picture possible. Our SVGA video extension cables can handle the lowest resolutions used on computer monitors today all the way up to a maximum of 2048 x 1536.Part No. 10H1-20203 -
This is a 3 foot standard 3-pin power cord has the ability to power two different devices with the same cord, eliminating excess clutter and using one less power outlet. This power cord will fit most computers, monitors, printers, and various other devices. This cable is UL listed and has a 13 Amp rating.Part No. 10W1-01203-16Y -
High Temperature Power Cord, C14 to C15, 14AWG, 15 Amp, UL SJT, Blue, 3 foot -
High Temperature Power Cord, C14 to C15, 14AWG, 15 Amp, UL SJT, Red, 3 foot -
Black NEMA 6-20P TO IEC-60320-C19, 12/3, 20 Amp, UL Listed, SJT, 3 footPart No. 10W3-42503 -
Hospital Grade, Green Dot, Power Cord, Nema 5-15 to C13, 14 AWG, SJT, 15 Amp / 125 Volt, Black, 3 Foot -
Hospital Grade, Green Dot, Power Cord, Nema 5-15 to C13, 14 AWG, SJT, 15 Amp / 125 Volt, 3 Foot -
This 3 foot Displayport to DVI cable will allow you to connect a DVI monitor to a DisplayPort compatible device (PC/Laptop). Perfect for when your display uses DVI yet your computer or laptop only has DisplayPort. Support full HD 1900x1080p This cable is unidirectional from computer Display Port to DVI monitor singlelink This cable does not support audio.Part No. 10H1-61103 -
This three foot black Power Extension Cord will extend your server's power cord to get you the length you need. Specifications: 20 Amps and 12AWG/3C.Part No. 10W3-41203
