Part No. 10U2-33003
-
Our 3 foot USB C to Micro USB cable allows you to connect any new device that uses the C type USB port, the new reversible one, to any device that uses the micro USB port that is known probably known as the phone charger port. The transfer speeds and charge speeds will be limited to the device and possibly the USB 2.0 specification. -
Our 3 foot USB A to C cable allows you to connect any new device that uses the C type USB port, the new reversible one, to any computer, laptop, wall wartt/charging block or other device which uses the older style rectangular port that is known as the USB A port. The transfer speeds and charge speeds will be limited to the device and possibly the USB 3.1 specification.Part No. 10U3-32003 -
Our blue 3 foot USB 3.0 SuperSpeed extension cables offer the next great leap in data transfer speeds for your devices. These particular USB 3.0 cables feature a Type A Male (Computer/Tablet/Laptop/Hub side) to Type A Female (Device side with Type A Male ended cable). This USB SuperSpeed cable enables the extension of an existing device up to a total of 10 feet without a hub/repeater or up to 60 feet (six cables) with hubs/repeaters. The 3.0 specification boasts amazing performance improvements that will allow consumers and businesses to get more done in less time, while still supplying full backwards compatibility with previous USB versions. USB 3.0 SuperSpeed features a 10 fold improvement in signaling rate that translates to 5 Gbps versus the older 480 Mbps (USB 2.0). The new Sync-N-Go technology which minimizes user wait time (devices detect and sync faster). USB 3.0 is bi-directional allowing information transfers in both directions at the same time. Add to this the new support for a new interrupt driven protocol, the device can initiate the transfer, vs the old host based device polling. The old way had the USB controller constantly pinging the device, now the device lets the host know when actions start. Lastly USB 3.0 increases power output from 500 mA to 900 mA for faster charging of attached devices and support of more robust peripherals.Part No. 10U3-02103E -
Our black 3 foot USB 3.0 SuperSpeed extension cables offer the next great leap in data transfer speeds for your devices. These particular USB 3.0 cables feature a Type A Male (Computer/Tablet/Laptop/Hub side) to Type A Female (Device side with Type A Male ended cable). This USB SuperSpeed cable enables the extension of an existing device up to a total of 10 feet without a hub/repeater or up to 60 feet (six cables) with hubs/repeaters. The 3.0 specification boasts amazing performance improvements that will allow consumers and businesses to get more done in less time, while still supplying full backwards compatibility with previous USB versions. USB 3.0 SuperSpeed features a 10 fold improvement in signaling rate that translates to 5 Gbps versus the older 480 Mbps (USB 2.0). The new Sync-N-Go technology which minimizes user wait time (devices detect and sync faster). USB 3.0 is bi-directional allowing information transfers in both directions at the same time. Add to this the new support for a new interrupt driven protocol, the device can initiate the transfer, vs the old host based device polling. The old way had the USB controller constantly pinging the device, now the device lets the host know when actions start. Lastly USB 3.0 increases power output from 500 mA to 900 mA for faster charging of attached devices and support of more robust peripherals.Part No. 10U3-02103EBK -
Our black 3 foot USB 3.0 SuperSpeed Type A to Type A Male/Male Cables offer the next great leap in data transfer speeds for your devices that require a male A connection. Some routers and USB hard drives use these type of cables. The 3.0 specification boasts amazing performance improvements that will allow consumers and businesses to get more done in less time, while still supplying full backwards compatibility with previous USB versions. USB 3.0 SuperSpeed features a 10 fold improvement in signaling rate that translates to 5 Gbps versus the older 480 Mbps (USB 2.0). The new Sync-N-Go technology which minimizes user wait time (devices detect and sync faster). USB 3.0 is bi-directional allowing information transfers in both directions at the same time. Add to this the new support for a new interrupt driven protocol, the device can initiate the transfer, vs the old host based device polling. The old way had the USB controller constantly pinging the device, now the device lets the host know when actions start. Lastly USB 3.0 increases power output from 500 mA to 900 mA for faster charging of attached devices and support of more robust peripherals.Part No. 10U3-02103BK -
This is a black 3 foot male to male USB 2.0 cable with A-type male connections on both ends. This is typically the style of connection found on the backs of PCs. This is not the standard configuration for a USB cable. Please make sure the device you are connecting to requires a Type A male cable, the port should be a type A female. USB 2.0 cables are backwards compatible, they can carry a USB 1.0 and 1.1 signal. USB cables are used to connect devices such as digital cameras, digital video cameras, scanners, printers, web cams, mice, keyboards, joysticks, network connections, etc.Part No. 10U2-02103BK -
This cable has matching A-Type USB 2.0 connectors on both ends. This style is typically found on the backs of PCs, and not the standard configuration for a USB cable. Please double check and make sure the device you are connecting to requires Type A Male cables, as the port should be a Type-A female. USB 2.0 cables are backwards compatible. This cable is usually used to connect devices such as digital cameras, digital video cameras, scanners, printers, web cams, mice, keyboards, joysticks, and network connections.Part No. 10U2-02103 -
This is a 3 foot male to male USB 2.0 cable with one A-type connection and one B-type. These are more commonly known as USB Printer/Scanner/ Device Cables. Type A is typically the style of connection found on the backs of PCs. Type B is the smaller square connector typically found on devices such as: printers; scanners; external hard drives and USB hubs. USB 2.0 cables are backwards compatible as they can carry a USB 1.0 and 1.1 signal. The maximum length for a single USB cable is 15 feet. To get more than 15 feet you will need to boost the signal with a repeater Cable (Parts: UC-50200, UC-50500, 11U2-51032 or 11U2-51049) or Hub (Parts: 40U2-14260, 41U2-02707, 41U2-21700 or 41U2-22100).Part No. 10U2-02203 -
This 3 foot USB extension cable will extend a standard USB 2.0 cable with a type-A connector. USB 2.0 cables are backwards compatible as they can carry a USB 1.0 and 1.1 signal. USB cables are used to connect devices such as digital cameras, digital video cameras, scanners, printers, web cams, mice, keyboards, joysticks, network connections, etc. The maximum length for a single USB cable is 15 feet. To get more than 15 feet you will need to boost the signal with a repeater Cable (Parts: UC-50200, UC-50500, 11U2-51032 or 11U2-51049) or Hub (Parts: 40U2-14260, 41U2-02707, 41U2-21700 or 41U2-22100).Part No. 10U2-02103E -
This 3 foot black SVGA extension cable has a HD15 male and a HD15 female end. The cable features ferrite beads, coaxial construction and double shielding. Its primary use is for extending the length of a computer to computer monitor connection for video display. The ferrite beads/cores are small iron oxide alloy cylinders wrapped around the ends of the cable. They are used to suppress EMI/RFI electronic noise on the cable by absorbing the unwanted high frequencies and dissipating them. The coaxial construction and double shielding work to further suppress noise, delivering you the best picture possible. Our SVGA video extension cables can handle the lowest resolutions used on computer monitors today all the way up to a maximum of 2048 x 1536.Part No. 10H1-20203 -
This 3 foot black SVGA Cable has two HD15 male ends and features ferrite beads, coaxial construction and double shielding. Its primary use is for connecting a computer to a computer monitor for video display. The ferrite beads/cores are small iron oxide alloy cylinders wrapped around the ends of the cable. They are used to suppress EMI/RFI electronic noise on the cable by absorbing the unwanted high frequencies and dissipating them. The coaxial construction and double shielding work to further suppress noise, delivering you the best picture possible. Our SVGA video cables can handle the lowest resolutions used on computer monitors today all the way up to a maximum of 2048 x 1536.Part No. 10H1-20103 -
Our 3 foot black Slim HD15 video cable, more commonly referred to as a SVGA male to male cable, is typically used to connect a computer to a computer monitor. This specific cable is a slim version, composed of 32 AWG (American Wire Gauge) coaxial wires, which is easier to route and manage. Ferrite Cores are small magnetic cores wrapped around the ends of the cable. They are used to suppress EMI/RFI electronic noise on the cable by absorbing the unwanted high frequencies and dissipating them. Slim SVGA Monitor Cables are smaller diameter than normal SVGA cables. Slim SVGA Cables also have a smaller hood and ferrite's to fit where other SVGA Cables will not. Our SVGA video cables can handle the lowest resolutions used on computer monitors today all the way up to a maximum of 2048 x 1536.Part No. 10H1-11103 -
Shielded Cat6 Blue Ethernet Patch Cable, Snagless/Molded Boot, 3 footPart No. 10X8-56103 -
Our 3 foot high quality serial extension cable features molded connectors and gold plated contacts for superior corrosion resistance ensuring a solid connection for the life of the cable. This male to female 1:1 serial cable is solidly constructed, UL rated and RoHS Compliant.Part No. 10D1-03203 -
This high quality 3 foot Serial extension cable has male and female DB37 ends. It features 37 conductors in a 1 to 1 pin-out, molded connectors and gold-plated contacts for a superior connection and optimal signal transfer.Part No. 10D4-01203 -
This high quality 3 foot DB37 Male to DB37 Male 37 conductor(1:1) serial cable features molded connectors and gold-plated contacts for a superior connection and optimal signal transfer.Part No. 10D4-01103 -
This is a 3 foot high quality external SCSI II device cable that features gold-plated connectors on 25 twisted pairs for superior data transfer. This particular cable features a Half Pitch DB50 (HPDB50) male connector on one end and a DB50 male on the other.Part No. 10P1-02103 -
Our standard 3 foot RCA Audio/Video cable is an economical way to connect audio and video devices, such as stereo equipment, DVD players, and TVs. These solidly constructed 2 x Male to 2 x Male extension cables feature Copper wiring and molded Nickel shells.Part No. 10R1-02103 -
This 3 foot male PS/2 (MiniDin6) cable is designed to work with keyboards and mice that utilize the MiniDin6 connector. Before the USB connection established its dominance connecting devices to a computer, the PS/2 connector was the primary method to secure a mouse or keyboard. To extend a PS/2 mouse or PS/2 keyboard that have a built in PS/2 cable with this, you would need a PS/2 coupler. This PS/2 cable can also be used to connect a computer to a PS/2 KVM switch if you are controlling multiple computers with a single monitor, keyboard and mouse.Part No. 10M2-01103 -
This 3 foot PS/2 (MiniDin6) extension cable is designed to work with keyboards and mice that utilize the MiniDin6 connector. Our cable features PS/2 (MiniDin6) male and female ends and 6 conductors with straight through pinning. Before the USB connection established its dominance connecting devices to a computer, the PS/2 connector was the primary method to secure a mouse or keyboard.Part No. 10M2-01203 -
This 3 foot Toslink (Toshiba Link) is the standard for fiber optic audio connections. It carries a digital audio signal from CD, DVD, Blu-ray, satellite box, cable box and computers to AV receivers for multi-channel surround sound reproduction. Fiber optic cable can faithfully send data without fear of traditional interferences that are typical in a copper-based medium. Virtually unaffected by electromagnetic and radio frequency interference, this cable reliable transfers a lossless signal for your entertainment. This connection is also known as: optical audio cable; digital optical; fiber optic audio and S/PDIF.Part No. 10TT-40103 -
This is a 3 foot standard power extension cable. This power cable features the NEMA 5/15P (standard three prong power plug) to a NEMA 5/15R (female) power cord. Use this cord to extend an existing outlet or cable. The jacket is durable and long lasting but flexible enough to wrap in tight spaces. The 16AWG pure copper conductor transfers maximum power. This cable operates on 125 volts and 13 Amps power. Operating temperature is 75C/167F.Part No. 10W1-04203-16 -
Power Cord Adapter, Black, C14 to NEMA 5-15R, 10 Amp, 3 foot -
This 3 foot power cord will power notebook computers and other appliances that require a non-polarized connection. The connector on this cable is shaped like a figure 8 with, or two circles side by side. It has a NEMA 1-15P on one end, and a Non-Polarized IEC C7 on the other. While this cable is listed as a notebook power cord, it will work with any device that uses a Non-Polarized IEC C7 power connection.Part No. 10W1-13203 -
Cat5e Ethernet cables of the 3 foot length are typically used to connect a Cable or DSL modem to a router/switch in the home or office or for particularly long patch panel runs inside server/network rooms. Though you may find many uses for such a length. This particular cable is a white UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-09103 -
This Cat5e 3 foot red crossover cable is used for networking, data transfer and phone lines. For use from a DSL/cable modem directly to the PC and for a direct link from PC to PC. This particular cable is a red UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-33703 -
This Cat5e 3 foot orange crossover cable is used for networking, data transfer and phone lines. For use from a DSL/cable modem directly to the PC and for a direct link from PC to PC. This particular cable is a orange UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-33303 -
This Cat5e 3 foot gray crossover cable is used for networking, data transfer and phone lines. For use from a DSL/cable modem directly to the PC and for a direct link from PC to PC. This particular cable is a gray UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-33103 -
This 3 foot Mini Displayport to HDMI cable will allow you to connect a HDMI monitor to a Mini-DisplayPort compatible device. Perfect for when your display uses HDMI yet your computer or laptop only has Mini-DisplayPort. This cable does not support audio.Part No. 10H1-62303 -
Bring HDMI capabilities to your Sprint Evo 4g or Motorola Droid X smart phone or other device that is equipped with micro HDMI with this 3 foot Micro HDMI (Type D Connector) cable. Even with its small form factor, this cable supports the full HDMI specifications including: high speed 10.2 Gbps data rate, Ethernet over HDMI, 4k x 2k support, audio return channel, 3D and deep color support. This is the newest and best digital video connection on the market. HDMI is the only cable that can transfer uncompressed high-definition video and multi channel digital audio in resolutions higher than 1440p. This CL2 rated(In Wall) cable will allow the transfer of digital audio and video in a single cable, permitting a less confusing mess of wires and a cleaner entertainment center. The HDMI connector is small, which makes it is ideal for installers and in-wall use. HDMI cables can be used with your HDTV's, DVD players, game consoles, cable and satellite set top boxes and DVRs. This cable conforms to the latest HDMI high speed with Ethernet specification.Part No. 10V3-44103 -
This 3 foot Mini Displayport to DVI cable will allow you to connect a DVI monitor to a Mini-DisplayPort compatible device. Perfect for when your display uses DVI yet your computer or laptop only has Mini-DisplayPort. This cable does not support audio.Part No. 10H1-62203 -
This 3 foot Displayport to VGA cable will allow you to connect a VGA monitor to a DisplayPort compatible device. Perfect for when your display uses VGA yet your computer or laptop only has DisplayPort. This cable does not support audio.Part No. 10H1-65103 -
This 3 foot Displayport to DVI cable will allow you to connect a DVI monitor to a DisplayPort compatible device (PC/Laptop). Perfect for when your display uses DVI yet your computer or laptop only has DisplayPort. Support full HD 1900x1080p This cable is unidirectional from computer Display Port to DVI monitor singlelink This cable does not support audio.Part No. 10H1-61103 -
Hospital Grade, Green Dot, Power Cord, Nema 5-15 to C13, 14 AWG, SJT, 15 Amp / 125 Volt, Black, 3 Foot -
Hospital Grade, Green Dot, Power Cord, Nema 5-15 to C13, 14 AWG, SJT, 15 Amp / 125 Volt, 3 Foot -
Our 3 foot HDMI to DVI-D single link cable will connect to a DVI-D or DVI-I digital flat panel and home theater devices such as DVD players, set-top boxes, projectors, switches and splitters with HDMI to DVI or vice versa. This premium high performance cable supports HDCP, high-bandwidth, uncompressed video, and has double shielding and 24k Gold connectors which prevents signal loss and screen ghosting for maximum video performance. This cable is compatible with all HDTV resolutions up to 1080p and is UL listed. In wall rated CL2. NOTE: HDMI-DVI cables are a VIDEO ONLY solution. The audio signal is not transmitted.Part No. 10V3-21503 -
Our 3 foot High Speed with Ethernet HDMI cable meets the latest standard put forth by the HDMI standards committee. It is fully backwards compatible with all previous HDMI versions. The HDMI cable is the newest and best digital video connection on the market. HDMI is the only cable that can transfer uncompressed high-definition video and multi channel digital audio in resolutions up to 4K (Ultra HD). HDMI cables are convenient because they will allow the transfer of digital audio and video in a single cable, permitting a less confusing mess of wires and a cleaner entertainment center. The HDMI connector is small, which makes it ideal for installers and in-wall use. HDMI cables can be used with any device with HDMI such as HDTVs, DVD players, Blu-ray players, game consoles (PS3, Xbox 360), cable and satellite set top boxes, DVRs, computers, etc.Part No. 10V3-41103 -
HDMI Cable, High Speed with Ethernet,1080p Full HD, HDMI Male, 3 footPart No. 10V1-41103 -
This 3 foot black cable features a flat body (only 1.8mm thick) for running on the floor or against baseboards. Cat6 cables can support 10 / 100 / 1000Mbps. The cable has stranded 32 AWG (American Wire Gauge) conductors for greater flexibility. Cat6 cables are used for networking, data transfer, and phone lines. Cat6 Cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a black UTP (Unshielded Twisted Pair) patch cable with molded boots. The connectors are wired to the T568B standard. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat6 Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X8-62203 -
This 3 foot Displayport to HDMI cable will allow you to connect a HDMI monitor to a DisplayPort compatible device. Perfect for when your display uses HDMI yet your computer or laptop only has DisplayPort. This cable does not support audio.Part No. 10H1-64103 -
Our 3 foot USB mini cable features a USB type A male connector on one end and a Mini-B 5 pin male on the other. It supports USB Hi-Speed/2.0 and is backwards compatible with USB 1.1. A USB type A male to USB mini-B male cable is commonly used as a digital video camera cable, cell phone cable, digital picture frame cable and many others. The cable listed here has a USB type A male connection to be plugged into a computer on one side. On the other side is a USB mini-B type connector with 5 pins. In the world of portable devices, many different types of mini USB cables are used. The picture above shows exactly how the connectors on this cable look, so make sure this matches your device. You may need to consult the specifications of your device to make sure what type of cable you need. This USB-A male to mini USB-B male cable features gold contacts to prevent corrosion and prolong the life of the cable. A USB 2.0 cord offers the fastest USB speeds currently available on most devices and is fully backwards compatible with USB 1.0 and USB 1.1. The maximum length of a USB 2.0 A-male to Mini-B cable is 15 ft. If you desire a length longer than 15 feet, you can use an active 2.0 repeater cable or a hub, both of which we offer at a great price. 2.0 repeater cable or a hub, both of which we offer at a great price.Part No. 10UM-02103BK -
This 3 foot high quality serial / modem cable features molded connectors and gold plated contacts for superior corrosion resistance ensuring a solid connection for the life of the cable. Our cable is ideal for connecting 25 pin serial devices to laptops, computers and expansion / interface cards that have a 9 pin serial port. This female to male 9 conductor serial cable is solidly constructed, UL rated and RoHS Compliant.Part No. 10D1-02303 -
This 3 foot black computer/monitor/printer power extension cord features a C13 (female) connector on one end and a C14 (male) connector on the other end. The cable is SVT with 3 18AWG(American Wire Gauge) conductors rated for 125 Volts, 10 Amps and an operating temperature of 75C. This cable can be used to extend any C13 ended cable, while its primary use is computer and printer power it will work for any device that requires a C13 end and does not exceed the power rating. Some examples of other devices would be plotters, vinyl cutters and industrial embroidery machines such as the Happy line.Part No. 10W1-02203 -
This is a 3ft standard computer/monitor power cable. This power cord fits most computers, monitors, printers home theater receiver, and various other devices. The cables ends are NEMA 5-15P (Wall Socket) and C13 (Computer/Monitor). It is rated for up to 10 AMPs. If you need a replacement computer or monitor power cord, this is likely the cable you need. These cables do carry other uses, such as larger laser printers and more industrial equipment such as embroidery machines. Please consult your manual to verify the C13 connector, your equipment would have a C14 socket.Part No. 10W1-01203 -
This is a 3 foot heavy duty 16 AWG (American Wire Gauge) computer/monitor power cord. This power cord fits most computers, monitors, printers and various other devices. The cables ends are NEMA 5-15P (Wall Socket) and C13 (Computer/Monitor). It is rated for up to 13 AMPs. If you need a replacement computer or monitor power cord, this is likely the cable you need. These cables do carry other uses, such as larger laser printers and more industrial equipment such as embroidery machines. Please consult your manual to verify the C13 connector, your equipment would have a C14 socket.Part No. 10W1-01203-16 -
Cat6 Ethernet cables of the 3 foot length are typically used to connect a Cable or DSL modem to a router/switch in the home or office or for particularly long patch panel runs inside server/network rooms. Though you may find many uses for such a length. Cat6 cables are used for networking, data transfer, and phone lines. Cat6 Cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a yellow UTP (Unshielded Twisted Pair) bootless patch cable. Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat6 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat6 Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X8-18103 -
Cat6 Ethernet cables of the 3 foot length are typically used to connect a Cable or DSL modem to a router/switch in the home or office or for particularly long patch panel runs inside server/network rooms. Though you may find many uses for such a length. Cat6 cables are used for networking, data transfer, and phone lines. Cat6 Cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a white UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat6 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat6 Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X8-09103 -
Cat6 Ethernet cables of the 3 foot length are typically used to connect a Cable or DSL modem to a router/switch in the home or office or for particularly long patch panel runs inside server/network rooms. Though you may find many uses for such a length. Cat6 cables are used for networking, data transfer, and phone lines. Cat6 Cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a white UTP (Unshielded Twisted Pair) bootless patch cable. Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat6 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat6 Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X8-19103
