Part No. 10X4-011HD
-
This 100 foot black high quality coaxial cable can be used with your VCR, TV, Cable Box, Satellite Receivers, etc. Great for older devices that dont have RCA or any of the newer audio/video connections. -
This 100 foot Black BNC RG59/U 75 Ohm coaxial cable is primarily used for connecting up video systems that require BNC connectors. The cable features fully molded nickel connectors for superior signal retention.Part No. 10X3-011HD -
Our 100 foot Active High Speed with Ethernet HDMI cable meets the latest standard put forth by the HDMI standards committee. It is fully backwards compatible with all previous HDMI versions. This active cable comes with a booster chip to enhance the signal on longer cable runs. The HDMI cable is the newest and best digital video connection on the market. HDMI is the only cable that can transfer uncompressed high-definition video and multi channel digital audio. HDMI cables are convenient because they will allow the transfer of digital audio and video in a single cable, permitting a less confusing mess of wires and a cleaner entertainment center. The HDMI connector is small, which makes it ideal for installers and in-wall use. HDMI cables can be used with any device with HDMI such as HDTVs, DVD players, Blu-ray players, game consoles (PS3, Xbox 360), cable and satellite set top boxes, DVRs, computers, etc. NOTE: This Active cable only works in one direction. The connector marked "input" plugs into your source HDMI device, cable box etc. and the connector marked "output" plugs into your display or TV. Due to the length, this 100ft active HDMI cable can only achieve 10080p. It will not achieve 4K picture.Part No. 10V3-411HD -
Our 100 foot black HD15 video cable with a 3.5mm Stereo Audio cable built in, more commonly referred to as a SVGA male to male cable with audio, is typically used to connect a computer to a computer monitor. Our SVGA video cables can handle the lowest resolutions used on computer monitors today all the way up to a maximum of 2048 x 1536. Plus this cable is double shielded to extend your video and audio signals without distortion or signal loss.Part No. 10H1-291HD -
This 100 foot black SVGA Cable has two HD15 male ends and features ferrite beads, coaxial construction and double shielding. Its primary use is for connecting a computer to a computer monitor for video display. The ferrite beads/cores are small iron oxide alloy cylinders wrapped around the ends of the cable. They are used to suppress EMI/RFI electronic noise on the cable by absorbing the unwanted high frequencies and dissipating them. The coaxial construction and double shielding work to further suppress noise, delivering you the best picture possible. Our SVGA video cables can handle the lowest resolutions used on computer monitors today all the way up to a maximum of 2048 x 1536.Part No. 10H1-201HD -
This white 16 AWG (American Wire Gauge) 2 conductor Speaker cable is CM rated for in-wall use, though it need not be used strictly in-wall. It comes in a convenient 100 foot spool and is ideal for wiring the speakers in your home theater or house to your receiver. Each conductor (wire) is composed of 65 0.16 mm strands made from pure copper which provides the optimal conductivity/low resistance to drive high quality audio to your speakers. Our speaker wire is made from pure copper. Some companies use the marketing term oxygen free copper which really means there is no iron oxide in the wire. When oxides of iron are in the copper, the conductivity of the wire reduces due to the higher resistance of the iron oxide. So it is in your best interest to install speaker wire made with pure copper like ours are. Another misnomer is that copper clad aluminum is the same quality as pure copper; this is false. The resistance (Ohms) between the two differ and as resistance in the cable increases the power delivered to the speaker is reduced. The sound will be lower and can lose some of its quality. If copper's conductivity, due to resistance, is rated at 100% then aluminum's conductivity would be rated at 61%. In order to deliver the same quality of sound with aluminum one would need a much larger gauge.Part No. 10G2-291HD -
Our 100 foot high quality RS-232 serial cable features molded connectors and gold plated contacts for superior corrosion resistance ensuring a solid connection for the life of the cable. The connectors are DB25 male and DB25 female supporting 25 conductors in a 1:1 configuration. This cable is ideal for extending 25 pin serial device cables. This male to male serial cable is solidly constructed, RoHS Compliant.Part No. 10D3-012HD -
This 100 foot stereo extension/patch cable is perfect for use as a patch cord extension or for extending headphones, guitars, amplifiers and more. It features a braided shield for EMI rejection and durable, molded PVC connectors to ensure a lifetime of usage. The ends are both 1/4 inch with one being male and the other being female.Part No. 10A1-622HD -
Use this 100 foot 1/4 inch patch cable to connect stereo devices to the amplifier, such as other amplifiers, mixer boards and pre-amps. Sound Engineers setting up a studio or concert venue often use longer cables (from 10 to 20 feet) between their mixers and amplifiers on stage, and then use shorter patch cords (from a few inches to one or two feet long) to connect other devices closer to the main mixer board. This cable features a braided shield for EMI rejection and durable, molded PVC connectors to ensure a lifetime of usage.Part No. 10A1-621HD -
Use this 100 foot 1/4 inch mono audio extension cable to extend the length of existing 1/4 inch mono cabling. This cable is compatible electric or electronic instruments such as the electric guitar, electric bass, synthesizer, electric piano, or electronic drum machines as well as equipment such as amplifiers, loud speakers and distortion pedals and other signal processors. This cable features a spiral shield for EMI rejection and durable, molded PVC connectors to ensure a lifetime of usage.Part No. 10A1-612HD -
Easily connect electric guitars, electric bass guitars, synthesizers, electronic drums or other electronic instruments to an amplifier with this quality 100-foot, 1/4-inch mono male to 1/4 mono male patch cable. This high performance nickel-plated cable features a spiral shield, which effectively minimizes interference and EMI rejection in order to provide a clean, noise-free sound. A black outer PVC jacket protects the cable from wear, moisture and other factors that could damage the cable or reduce its effectiveness. This cable is RoHS compliant and has a lifetime warranty.Part No. 10A1-611HD
