Part No. 10X8-56110
-
Our 10 foot black HD15 video cable with a 3.5mm Stereo Audio cable built in, more commonly referred to as a SVGA male to male cable with audio, is typically used to connect a computer to a computer monitor. Our SVGA video cables can handle the lowest resolutions used on computer monitors today all the way up to a maximum of 2048 x 1536. Plus this cable is double shielded to extend your video and audio signals without distortion or signal loss.Part No. 10H1-29110
-
Our 10 foot black Slim HD15 video cable, more commonly referred to as a SVGA male to male cable, is typically used to connect a computer to a computer monitor. This specific cable is a slim version, composed of 32 AWG (American Wire Gauge) coaxial wires, which is easier to route and manage. Ferrite Cores are small magnetic cores wrapped around the ends of the cable. They are used to suppress EMI/RFI electronic noise on the cable by absorbing the unwanted high frequencies and dissipating them. Slim SVGA Monitor Cables are smaller diameter than normal SVGA cables. Slim SVGA Cables also have a smaller hood and ferrite's to fit where other SVGA Cables will not. Our SVGA video cables can handle the lowest resolutions used on computer monitors today all the way up to a maximum of 2048 x 1536.Part No. 10H1-11110
-
This 10 foot black SVGA Cable has two HD15 male ends and features ferrite beads, coaxial construction and double shielding. Its primary use is for connecting a computer to a computer monitor for video display. The ferrite beads/cores are small iron oxide alloy cylinders wrapped around the ends of the cable. They are used to suppress EMI/RFI electronic noise on the cable by absorbing the unwanted high frequencies and dissipating them. The coaxial construction and double shielding work to further suppress noise, delivering you the best picture possible. Our SVGA video cables can handle the lowest resolutions used on computer monitors today all the way up to a maximum of 2048 x 1536.Part No. 10H1-20110
-
This 10 foot black SVGA extension cable has a HD15 male and a HD15 female end. The cable features ferrite beads, coaxial construction and double shielding. Its primary use is for extending the length of a computer to computer monitor connection for video display. The ferrite beads/cores are small iron oxide alloy cylinders wrapped around the ends of the cable. They are used to suppress EMI/RFI electronic noise on the cable by absorbing the unwanted high frequencies and dissipating them. The coaxial construction and double shielding work to further suppress noise, delivering you the best picture possible. Our SVGA video extension cables can handle the lowest resolutions used on computer monitors today all the way up to a maximum of 2048 x 1536.Part No. 10H1-20210
-
This 10 foot USB extension cable will extend a standard USB 2.0 cable with a type-A connector. USB 2.0 cables are backwards compatible as they can carry a USB 1.0 and 1.1 signal. USB cables are used to connect devices such as digital cameras, digital video cameras, scanners, printers, web cams, mice, keyboards, joysticks, network connections, etc. The maximum length for a single USB cable is 15 feet. To get more than 15 feet you will need to boost the signal with a repeater Cable (Parts: UC-50200, UC-50500, 11U2-51032 or 11U2-51049) or Hub (Parts: 40U2-14260, 41U2-02707, 41U2-21700 or 41U2-22100).Part No. 10U2-02110E
-
This is a 10 foot male to male USB 2.0 cable with one A-type connection and one B-type. These are more commonly known as USB Printer/Scanner/ Device Cables. Type A is typically the style of connection found on the backs of PCs. Type B is the smaller square connector typically found on devices such as: printers; scanners; external hard drives and USB hubs. USB 2.0 cables are backwards compatible as they can carry a USB 1.0 and 1.1 signal. The maximum length for a single USB cable is 15 feet. To get more than 15 feet you will need to boost the signal with a repeater Cable (Parts: UC-50200, UC-50500, 11U2-51032 or 11U2-51049) or Hub (Parts: 40U2-14260, 41U2-02707, 41U2-21700 or 41U2-22100).Part No. 10U2-02210
-
This is a 10 foot male to male USB 2.0 cable with A-type male connections on both ends. This is typically the style of connection found on the backs of PCs. This is not the standard configuration for a USB cable. Please make sure the device you are connecting to requires a Type A male cable, the port should be a type A female. USB 2.0 cables are backwards compatible, they can carry a USB 1.0 and 1.1 signal. USB cables are used to connect devices such as digital cameras, digital video cameras, scanners, printers, web cams, mice, keyboards, joysticks, network connections, etc.Part No. 10U2-02110
-
Our black 10 foot USB 3.0 SuperSpeed Type A to Type A Male/Male Cables offer the next great leap in data transfer speeds for your devices that require a male A connection. Some routers and USB hard drives use these type of cables. The 3.0 specification boasts amazing performance improvements that will allow consumers and businesses to get more done in less time, while still supplying full backwards compatibility with previous USB versions. USB 3.0 SuperSpeed features a 10 fold improvement in signaling rate that translates to 5 Gbps versus the older 480 Mbps (USB 2.0). The new Sync-N-Go technology which minimizes user wait time (devices detect and sync faster). USB 3.0 is bi-directional allowing information transfers in both directions at the same time. Add to this the new support for a new interrupt driven protocol, the device can initiate the transfer, vs the old host based device polling. The old way had the USB controller constantly pinging the device, now the device lets the host know when actions start. Lastly USB 3.0 increases power output from 500 mA to 900 mA for faster charging of attached devices and support of more robust peripherals.Part No. 10U3-02110BK
-
Our blue 10 foot USB 3.0 SuperSpeed Type A to Type A Male/Male Cables offer the next great leap in data transfer speeds for your devices that require a male A connection. Some routers and USB hard drives use these type of cables. The 3.0 specification boasts amazing performance improvements that will allow consumers and businesses to get more done in less time, while still supplying full backwards compatibility with previous USB versions. USB 3.0 SuperSpeed features a 10 fold improvement in signaling rate that translates to 5 Gbps versus the older 480 Mbps (USB 2.0). The new Sync-N-Go technology which minimizes user wait time (devices detect and sync faster). USB 3.0 is bi-directional allowing information transfers in both directions at the same time. Add to this the new support for a new interrupt driven protocol, the device can initiate the transfer, vs the old host based device polling. The old way had the USB controller constantly pinging the device, now the device lets the host know when actions start. Lastly USB 3.0 increases power output from 500 mA to 900 mA for faster charging of attached devices and support of more robust peripherals.Part No. 10U3-02110
-
Our black 10 foot USB 3.0 SuperSpeed extension cables offer the next great leap in data transfer speeds for your devices. These particular USB 3.0 cables feature a Type A Male (Computer/Tablet/Laptop/Hub side) to Type A Female (Device side with Type A Male ended cable). This USB SuperSpeed cable enables the extension of an existing device up to a total of 10 feet without a hub/repeater or up to 60 feet (six cables) with hubs/repeaters. The 3.0 specification boasts amazing performance improvements that will allow consumers and businesses to get more done in less time, while still supplying full backwards compatibility with previous USB versions. USB 3.0 SuperSpeed features a 10 fold improvement in signaling rate that translates to 5 Gbps versus the older 480 Mbps (USB 2.0). The new Sync-N-Go technology which minimizes user wait time (devices detect and sync faster). USB 3.0 is bi-directional allowing information transfers in both directions at the same time. Add to this the new support for a new interrupt driven protocol, the device can initiate the transfer, vs the old host based device polling. The old way had the USB controller constantly pinging the device, now the device lets the host know when actions start. Lastly USB 3.0 increases power output from 500 mA to 900 mA for faster charging of attached devices and support of more robust peripherals.Part No. 10U3-02110EBK
-
Our blue 10 foot USB 3.0 SuperSpeed extension cables offer the next great leap in data transfer speeds for your devices. These particular USB 3.0 cables feature a Type A Male (Computer/Tablet/Laptop/Hub side) to Type A Female (Device side with Type A Male ended cable). This USB SuperSpeed cable enables the extension of an existing device up to a total of 10 feet without a hub/repeater or up to 60 feet (six cables) with hubs/repeaters. The 3.0 specification boasts amazing performance improvements that will allow consumers and businesses to get more done in less time, while still supplying full backwards compatibility with previous USB versions. USB 3.0 SuperSpeed features a 10 fold improvement in signaling rate that translates to 5 Gbps versus the older 480 Mbps (USB 2.0). The new Sync-N-Go technology which minimizes user wait time (devices detect and sync faster). USB 3.0 is bi-directional allowing information transfers in both directions at the same time. Add to this the new support for a new interrupt driven protocol, the device can initiate the transfer, vs the old host based device polling. The old way had the USB controller constantly pinging the device, now the device lets the host know when actions start. Lastly USB 3.0 increases power output from 500 mA to 900 mA for faster charging of attached devices and support of more robust peripherals.Part No. 10U3-02110E
-
This cable takes advantage of the latest USB standard, USB Type-C Alternate Modes, to bring you a simple video cable for your device, be it the newest Galaxy, Android tablet, MacBook, or PC laptop. If your device has a USB-C port look for the USB trident. Next to the trident will be the DP symbol (the P will be in the D.) With this port, streaming on a big screen is as easy as plugging the USB-C end into your device and the HDMI end into your display. There are no drivers to install, it just works! For those interested in technical details, the cable works because VESA decided to release DisplayPort over USB-C in order to make the newest connector on the universal serial bus even more universal. This standard that they developed keeps all the good of USB SuperSpeed and augments it with DisplayPort A/V which includes 4K HDMI! Please note that not all USB C equipped devices allow video out via a cable like this. Please check the specifications on your device to ensure it is capable. Hint look for the USB trident logo with DisplayPorts D logo next to it. If that does not work you can always check the manual for DisplayPort over USB-C or use the Google, you can try asking in over live chat or by phone but please be prepared to supply the make and model of your device.Part No. 10U2-34010
-
This is a 10-foot computer/monitor power cord featuring a right angle connector on the device end (C13). The right angle permits one to power devices in very tight spaces like server racks and communications closets. This power cord fits most computers, monitors, printers and various other devices. The cables ends are NEMA 5-15P (Wall Socket) and C13 (Computer/Monitor). It is rated for up to 10 AMPs. If you need a replacement computer or monitor power cord designed for tight spaces, this is likely the cable you need. These cables do carry other uses, such as larger laser printers and more industrial equipment such as embroidery machines. Please consult your manual to verify the C13 connector, your equipment would have a C14 socket.Part No. 10W1-06210
-
This is a 10 foot standard 3-pin power cord has the ability to power two different devices with the same cord, eliminating excess clutter and using one less power outlet. This power cord will fit most computers, monitors, printers, and various other devices. This cable features a thicker, 16 awg wire that is capable of 13 amps. This cable is UL listedPart No. 10W1-01210-16Y
-
Our 10 foot locking HDMI High Speed cable features a simple slide lock mechanism to secure your connections and prevent accidental disconnection. The HDMI cable is the newest and best digital video connection on the market. HDMI is the only cable that can transfer uncompressed high-definition video and multi channel digital audio in resolutions up to 4K (Ultra HD). HDMI cables are convenient because they will allow the transfer of digital audio and video in a single cable, permitting a less confusing mess of wires and a cleaner entertainment center. The HDMI connector is small, which makes it ideal for installers and in-wall use. HDMI cables can be used with any device with HDMI such as HDTVs, DVD players, Blu-ray players, game consoles (PS3, Xbox 360), cable and satellite set top boxes, DVRs, computers, etc.Part No. 10V3-45110
-
Professional audio cables are a must for any musician looking to take their act to the next level. Our premium TS-M (Tip Sleeve Mono) cable is perfect for guitars and other instruments requiring an unbalanced connection to amplifiers and other equipment. They feature a pure copper conductor, a tough outer PVC jacket wrapped in a woven sleeve designed to keep you playing for years. 10-foot length Gold Plated Tip Braided ShieldPart No. 10A2-66110
-
The RedMere chipset featured in these ultra-thin cables allows full transmission of 4K video at refresh rates up to 30Hz in a much more slender package. This thin HDMI cable has a much tighter bend radius than a standard cable permitting access to tighter spaces and/or facilitating a cleaner more professional installation. This cable is an excellent option for anyone looking to push a beautiful picture to their displays while reducing cable clutter. Road warriors, installers, and vacationers alike will appreciate how much less luggage and storage space these RedMere enabled HDMI cords take in comparison to the thick cables of yesteryear. Specifications
- Max Resolution: 4K @ 30Hz
- HDCP 2.2 Compliant
- Supports ARC(audio return channel)
- Directional cable with clearly labeled connectors
- Cable OD: 3.6 mm
- 36 AWG
- Length: 10 feet
- Color: Black
Part No. 10V3-48110 -
This is a 10-foot standard power extension cable. This power cable features the NEMA 5/15P (standard three-prong power plug) to a NEMA 5/15R (female) power cord. Use this cord to extend an existing outlet or cable. The jacket is durable and long-lasting but flexible enough to wrap in tight spaces. The 18AWG pure copper conductor transfers maximum power. This UL and CSA listed cable operates on 125 volts and 10 Amps power. Operating temperature is 75C/167F.Part No. 10W1-03210
-
Cat5e Ethernet cables of the 10 foot length have a variety of uses. These cables will suffice for connecting routers/switches to Cable/DSL modems, computers to routers/switches or even in the server/network room for connecting ports on patch panels. These Ethernet Cables are great for the home office or any other environment. This particular cable is a gray UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-02110
-
Cat5e Ethernet cables of the 10 foot length have a variety of uses. These cables will suffice for connecting routers/switches to Cable/DSL modems, computers to routers/switches or even in the server/network room for connecting ports on patch panels. These Ethernet Cables are great for the home office or any other environment. This particular cable is a orange UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-03110
-
Cat5e Ethernet cables of the 10 foot length have a variety of uses. These cables will suffice for connecting routers/switches to Cable/DSL modems, computers to routers/switches or even in the server/network room for connecting ports on patch panels. These Ethernet Cables are great for the home office or any other environment. This particular cable is a black UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-02210
-
Cat5e Ethernet cables of the 10 foot length have a variety of uses. These cables will suffice for connecting routers/switches to Cable/DSL modems, computers to routers/switches or even in the server/network room for connecting ports on patch panels. These Ethernet Cables are great for the home office or any other environment. This particular cable is a blue UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-06110
-
Cat5e Ethernet cables of the 10 foot length have a variety of uses. These cables will suffice for connecting routers/switches to Cable/DSL modems, computers to routers/switches or even in the server/network room for connecting ports on patch panels. These Ethernet Cables are great for the home office or any other environment. This particular cable is a green UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-05110
-
Cat5e Ethernet cables of the 10 foot length have a variety of uses. These cables will suffice for connecting routers/switches to Cable/DSL modems, computers to routers/switches or even in the server/network room for connecting ports on patch panels. These Ethernet Cables are great for the home office or any other environment. This particular cable is a purple UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-04110
-
Cat5e Ethernet cables of the 10 foot length have a variety of uses. These cables will suffice for connecting routers/switches to Cable/DSL modems, computers to routers/switches or even in the server/network room for connecting ports on patch panels. These Ethernet Cables are great for the home office or any other environment. This particular cable is a red UTP (Unshielded Twisted Pair) patch cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat5e patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat5e Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X6-07110