Part No. 10X8-33110
-
This Cat6 10 foot gray crossover cable is used for networking, data transfer and phone lines. For use from a DSL/cable modem directly to the PC and for a direct link from PC to PC. Cat6 cables are used for networking, data transfer, and phone lines. Cat6 Cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a gray UTP (Unshielded Twisted Pair) crossover cable with molded boots (snagless installation) and extra protection for the RJ45 connector and clip. Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat6 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat6 Ethernet patch cables exceed the EIA/TIA-568-C standard. -
Cat6 Ethernet cables of the 10 foot length have a variety of uses. These cables will suffice for connecting routers/switches to Cable/DSL modems, computers to routers/switches or even in the server/network room for connecting ports on patch panels. These Ethernet Cables are great for the home office or any other environment. Cat6 cables are used for networking, data transfer, and phone lines. Cat6 Cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a red UTP (Unshielded Twisted Pair) bootless patch cable. Cat6 cable includes a spline to help ensure separation between the pairs which limits cross talk. The connectors are wired to the T568B standard. The individual conductors are 24 AWG (American wire gauge) stranded pure copper. Cat6 patch cables are stranded to improve flexibility. Pure copper conductors provide the best signal possible. The RJ45 plug features gold connectors to prevent corrosion thus ensuring a longer cable life. Our Cat6 Ethernet patch cables exceed the EIA/TIA-568-C standard.Part No. 10X8-17110 -
This 10 foot HDMI extension cable with high-speed Ethernet works perfectly to extend out a too-short cable. This really comes in handy if your existing cable comes up a few feet short. This extender's connectors are HDMI male to HDMI female.Part No. 10V3-41210 -
This is an extension cable used to extend the older-style large 5 pin keyboard cable. Color is beige.Part No. 10I5-02210 -
This 10 foot DB15 Male to DB15 Male Apple/Mac monitor cable is designed for use only with Mac computers. Featuring molded boots, 15 conductors and shielding, this well constructed Mac specific monitor cable will deliver a clear and crisp signal. The connector is a row of 7 pins and a row of 8 pins and should not be confused with an SVGA/VGA end.Part No. 10D2-01110 -
Use this 10 foot 1/4 inch patch cable to connect a large range of electric or electronic instruments use 1/4 inch mono patch cords to connect the instrument to the amplifier, such as the electric guitar, electric bass, synthesizer, electric piano, or electronic drum machines. Musicians playing electric or electronic instruments often use longer cables (from 10 to 20 feet) between their instrument and their amplifier, and then use shorter patch cords (from a few inches to one or two feet long) to connect chains of effects devices, stomp box pedals, or other signal processors. This cable features a spiral shield for EMI rejection and durable, molded PVC connectors to ensure a lifetime of usage.Part No. 10A1-61110 -
Use this 10 foot 1/4 inch patch cable to connect stereo devices to the amplifier, such as other amplifiers, mixer boards and pre-amps. Sound Engineers setting up a studio or concert venue often use longer cables (from 10 to 20 feet) between their mixers and amplifiers on stage, and then use shorter patch cords (from a few inches to one or two feet long) to connect other devices closer to the main mixer board. This cable features a braided shield for EMI rejection and durable, molded PVC connectors to ensure a lifetime of usage.Part No. 10A1-62110 -
This 10 foot RGBHV video cable features double foil shielding and is designed for professional video setups/displays requiring a 5 BNC connection. RGBHV stands for red, blue, green, horizontal sync and vertical sync.Part No. 10B1-07110 -
Our 10 foot black DisplayPort cable supports DisplayPort version 1.2 and features two male locking DisplayPort ends. DisplayPort is a digital display interface developed by the Video Electronics Standards Association (VESA). The interface is primarily used to connect a video source to a display device such as a computer monitor. Supporting a whopping 8.64 Gbit/s data transmission rate, this next generation audio/video cable is perfect for connecting your computer to your HDTV. DisplayPort technology allows for up to 4k video with 10-bit color, 8-channel 24-bit audio and a 1 Mbit/s bi-directional auxiliary data channel all in one cable. This cable features heavy-duty PVC construction, sleek, a snag-free over mold and corrosion resistant, gold-plated connectors to help deliver years of entertainment content.Part No. 10H1-60110 -
Mini DisplayPort to DisplayPort cables meet the DisplayPort 1.2 standard, including but not limited to 8.64 Gigabit throughput. These cables have an aluminum mylar foil, braided shield and are RoHS compliant. DisplayPort is a digital display interface developed by the Video Electronics Standards Association (VESA). The interface is primarily used to connect a video source to a display device such as a computer monitor. Supporting a whopping 8.64 Gbit/s data transmission rate, this next generation audio/video cable is perfect for connecting your computer to your HDTV. DisplayPort v1.2 technology allows for up to 2560x1600 video with 10-bit color, 8-channel 24-bit audio and a 1 Mbit/s bi-directional auxiliary data channel all in one cable. This Mini DisplayPort to DisplayPort cable features heavy-duty PVC construction, sleek, a snag-free over mold and corrosion resistant, gold-plated connectors to help deliver years of entertainment content.Part No. 10H1-62110 -
This 10 foot DB15 Male to DB15 Female Apple/Mac monitor extensions cable is designed for use only with Mac computers. Featuring molded boots, 15 conductors and shielding, this well constructed Mac specific monitor cable will deliver a clear and crisp signal. The connector is a row of 7 pins and a row of 8 pins and should not be confused with an SVGA/VGA end.Part No. 10D2-01210 -
This 10 foot cable is referred to as a Din 5 (male). It is an older AT keyboard cable. This cable's pinout is straight through which means pin 1 on one end is connected to pin 1 on the other end. It is round and larger than the more recent MiniDin6 connector that replaced it for a time in keyboards and Mice. USB has since replaced the MiniDin6 (PS/2) connector which would then make Din5 a Grandfather. Congrats to Din5!Part No. 10I5-02110
