web analytics
  • This Mini-DP (DisplayPort) adapter convert the graphics signal from a modern Mac, notebook or PC graphics card with Mini-DP output into a standard HDMI, DVI-D or VGA signal so that traditional monitors or flat-screen TVs can be run with an appropriate port. The adapter is connected directly to the Mini-DP connection on the PC with a suitable monitor cable.

    • Converts the Mini-DP output signal to DVI-D, HDMI or the analog VGA connection
    • Only one of the three output ports can be used at the same time - only one cable needs to be plugged in
    • Maximum resolutions 1920 x 1200@60Hz up to 3m
    • Compatible to DP 1.2. specification
    • Support for HDMI/DVI per channel 12 Bit Color depth
    • Supports 5.1 audio system via HDMI (Mini-DP graphics interface must support audio playback)
    • Mini-DP connector to 3x socket: DVI, HDMI and VGA
    • White housing with white cable, length: approx. 20cm

     

     

    Part No. 41050
    • Supports resolutions up to 1080p at 60Hz up to 3m
    • Mini DisplayPort 1.1a input
    • HDMI/DVI-D/DisplayPort output
    • Compliant with VESA interop guidelines
    • HDMI level shifting up to 2.25Gbps per channel (250Mhz pixel clock)
    • Support HDMI/DVI 12bit per channel deep Color
    • 5.1ch Audio supported over HDMI channel (only on the Mac's that support audio over DP channel)
    • Integrated 50 Ohm termination resistors for AC coupled differential inputs
    • Enable/disable TMDS for power saving
    • Transparent operation: no retiming or configuration required
     
    Note: Only one output channel may be used at a time
    Part No. 41049
    • Supports Video-Mirroring & Extended desktop modes
    • DisplayPort Male to DVI-D Female connectors
    • Compliant with DisplayPort 1.1 specification for both 1.62 and 2.7Gbps
    • Compliant with DVI 1.1 specification up to 1.65Gbps
    • PC:VGA, SVGA, VGA, SXGA and UXGA
    • HDTV: 480i, 576i, 480p, 576p, 1080i, 1080p and 1920x1200
    • Overall length: 168mm
    • Color: Black
    • Gold plated connectors
    • 2 year warranty
    Part No. 41019
    • Supports video-mirroring and extended desktop modes
    • Compliant with DisplayPort 1.1 specification for both 1.62 and 2.7Gbps
    • Compliant with HDMI 1.3a specification up to 2.25Gbps
    • Compliant with DVI 1.1 specification up to 1.65Gbps
    • PC: VGA, SVGA, SXGA and UXGA
    • HDTV: 480i, 576i, 480p, 576p, 1080i, and 1080p
    • Overall length: 168mm
    • Color: Black
    • Gold plated connectors
    • 2 year warranty
    Part No. 41018
    • Supports Video-Mirroring & Extended desktop modes
    • Compliant with DisplayPort 1.1 specification for both 1.62 and 2.7Gbps
    • Supports greater than QXGA (2048 x 1536) resolutions at 24-bit Color depths
    • Compliant with existing VESA and Consumer Electronics Association standards
    • Supports resolutions up to 1080p with a maximum cable length of 15 metres
    • Color: Black
    • Gold plated connectors
    • Overall approx length: 29cm
    • 2 year warranty
    Part No. 41017
    • Distribute signals across 4 DP displays
    • Supports resolutions up to 2560x1600
    • Supports digital audio pass-through
    • Metal housing
    • 2 Year Warranty

     

    The Lindy 4 Port DisplayPort 1.1 Splitter is a high-end solution for sharing DP signals across 4 displays.

     

    Supporting resolutions up to 2560x1600, this splitter is ideal for use in premium DP distribution setups when providing information to a wider audience with greater coverage, such as digital signage in retail or informative displays in university libraries. Digital audio up to 7.1CH is seamlessly passed through for immersive multi-channel audio to support the video content.

    "
Go to Top