Part No. 10G2-29150
-
This white 16 AWG (American Wire Gauge) 2 conductor Speaker cable is CM rated for in-wall use, though it need not be used strictly in-wall. It comes in a convenient 50 foot spool and is ideal for wiring the speakers in your home theater or house to your receiver. Each conductor (wire) is composed of 65 0.16 mm strands made from pure copper which provides the optimal conductivity/low resistance to drive high quality audio to your speakers. Our speaker wire is made from pure copper. Some companies use the marketing term oxygen free copper which really means there is no iron oxide in the wire. When oxides of iron are in the copper, the conductivity of the wire reduces due to the higher resistance of the iron oxide. So it is in your best interest to install speaker wire made with pure copper like ours are. Another misnomer is that copper clad aluminum is the same quality as pure copper; this is false. The resistance (Ohms) between the two differ and as resistance in the cable increases the power delivered to the speaker is reduced. The sound will be lower and can lose some of its quality. If copper's conductivity, due to resistance, is rated at 100% then aluminum's conductivity would be rated at 61%. In order to deliver the same quality of sound with aluminum one would need a much larger gauge. -
This white 16 AWG (American Wire Gauge) 2 conductor Speaker cable is CM rated for in-wall use, though it need not be used strictly in-wall. It comes in a convenient 100 foot spool and is ideal for wiring the speakers in your home theater or house to your receiver. Each conductor (wire) is composed of 65 0.16 mm strands made from pure copper which provides the optimal conductivity/low resistance to drive high quality audio to your speakers. Our speaker wire is made from pure copper. Some companies use the marketing term oxygen free copper which really means there is no iron oxide in the wire. When oxides of iron are in the copper, the conductivity of the wire reduces due to the higher resistance of the iron oxide. So it is in your best interest to install speaker wire made with pure copper like ours are. Another misnomer is that copper clad aluminum is the same quality as pure copper; this is false. The resistance (Ohms) between the two differ and as resistance in the cable increases the power delivered to the speaker is reduced. The sound will be lower and can lose some of its quality. If copper's conductivity, due to resistance, is rated at 100% then aluminum's conductivity would be rated at 61%. In order to deliver the same quality of sound with aluminum one would need a much larger gauge.Part No. 10G2-291HD -
This white 16 AWG (American Wire Gauge) 2 conductor Speaker cable is CM rated for in-wall use, though it need not be used strictly in-wall. It comes in a 500 foot pull box and is ideal for wiring the speakers in your home theater or house to your receiver. Each conductor (wire) is composed of 65 0.16 mm strands made from pure copper which provides the optimal conductivity/low resistance to drive high quality audio to your speakers. Our speaker wire is made from pure copper. Some companies use the marketing term oxygen free copper which really means there is no iron oxide in the wire. When oxides of iron are in the copper, the conductivity of the wire reduces due to the higher resistance of the iron oxide. So it is in your best interest to install speaker wire made with pure copper like ours are. Another misnomer is that copper clad aluminum is the same quality as pure copper; this is false. The resistance (Ohms) between the two differ and as resistance in the cable increases the power delivered to the speaker is reduced. The sound will be lower and can lose some of its quality. If copper's conductivity, due to resistance, is rated at 100% then aluminum's conductivity would be rated at 61%. In order to deliver the same quality of sound with aluminum one would need a much larger gauge.Part No. 10G2-291SF -
This white 16 AWG (American Wire Gauge) 4 conductor Speaker cable is CM rated for in-wall use, though it need not be used strictly in-wall. It comes in a 500 foot pull box and is ideal for wiring the speakers in your home theater or house to your receiver. Each conductor (wire) is composed of 65 0.16 mm strands made from pure copper which provides the optimal conductivity/low resistance to drive high quality audio to your speakers. Our speaker wire is made from pure copper. Some companies use the marketing term oxygen free copper which really means there is no iron oxide in the wire. When oxides of iron are in the copper, the conductivity of the wire reduces due to the higher resistance of the iron oxide. So it is in your best interest to install speaker wire made with pure copper like ours are. Another misnomer is that copper clad aluminum is the same quality as pure copper; this is false. The resistance (Ohms) between the two differ and as resistance in the cable increases the power delivered to the speaker is reduced. The sound will be lower and can lose some of its quality. If copper's conductivity, due to resistance, is rated at 100% then aluminum's conductivity would be rated at 61%. In order to deliver the same quality of sound with aluminum one would need a much larger gauge.Part No. 10G2-491SF -
This black 16 AWG (American Wire Gauge) 4 conductor Speaker cable is rated for outdoor use and/or direct burial. It comes in a 500 foot pull box and is ideal for running to exterior speakers in your backyard or outside the office. Each conductor (wire) is composed of 65 0.16mm strands made from pure copper which provides the optimal conductivity/low resistance to drive high quality audio to your speakers. Our speaker wire is made from pure copper. Some companies use the marketing term oxygen free copper which really means there is no iron oxide in the wire. When oxides of iron are in the copper, the conductivity of the wire reduces due to the higher resistance of the iron oxide. So it is in your best interest to install speaker wire made with pure copper like ours are. Another misnomer is that copper clad aluminum is the same quality as pure copper; this is false. The resistance (Ohms) between the two differ and as resistance in the cable increases the power delivered to the speaker is reduced. The sound will be lower and can lose some of its quality. If copper's conductivity, due to resistance, is rated at 100% then aluminum's conductivity would be rated at 61%. In order to deliver the same quality of sound with aluminum one would need a much larger gauge.Part No. 10G2-722SF -
This white 14 AWG (American Wire Gauge) 2 conductor Speaker cable is CM rated for in-wall use, though it need not be used strictly in-wall. It comes in a 500 foot pull box and is ideal for wiring the speakers in your home theater or house to your receiver. Each conductor (wire) is composed of 105 0.16 mm strands made from pure copper which provides the optimal conductivity/low resistance to drive high quality audio to your speakers. Our speaker wire is made from pure copper. Some companies use the marketing term oxygen free copper which really means there is no iron oxide in the wire. When oxides of iron are in the copper, the conductivity of the wire reduces due to the higher resistance of the iron oxide. So it is in your best interest to install speaker wire made with pure copper like ours are. Another misnomer is that copper clad aluminum is the same quality as pure copper; this is false. The resistance (Ohms) between the two differ and as resistance in the cable increases the power delivered to the speaker is reduced. The sound will be lower and can lose some of its quality. If copper's conductivity, due to resistance, is rated at 100% then aluminum's conductivity would be rated at 61%. In order to deliver the same quality of sound with aluminum one would need a much larger gauge.Part No. 10G3-291SF -
This white 14 AWG (American Wire Gauge) 4 conductor Speaker cable is CM rated for in-wall use, though it need not be used strictly in-wall. It comes in a 500 foot pull box and is ideal for wiring the speakers in your home theater or house to your receiver. Each conductor (wire) is composed of 105 0.16 mm strands made from pure copper which provides the optimal conductivity/low resistance to drive high quality audio to your speakers. Our speaker wire is made from pure copper. Some companies use the marketing term oxygen free copper which really means there is no iron oxide in the wire. When oxides of iron are in the copper, the conductivity of the wire reduces due to the higher resistance of the iron oxide. So it is in your best interest to install speaker wire made with pure copper like ours are. Another misnomer is that copper clad aluminum is the same quality as pure copper; this is false. The resistance (Ohms) between the two differ and as resistance in the cable increases the power delivered to the speaker is reduced. The sound will be lower and can lose some of its quality. If copper's conductivity, due to resistance, is rated at 100% then aluminum's conductivity would be rated at 61%. In order to deliver the same quality of sound with aluminum one would need a much larger gauge.Part No. 10G3-491SF -
This black 14 AWG (American Wire Gauge) 2 conductor Speaker cable is rated for outdoor use and/or direct burial. It comes in a 500 foot pull box and is ideal for running to exterior speakers in your backyard or outside the office. Each conductor (wire) is composed of 105 0.16mm strands made from pure copper which provides the optimal conductivity/low resistance to drive high quality audio to your speakers. Our speaker wire is made from pure copper. Some companies use the marketing term oxygen free copper which really means there is no iron oxide in the wire. When oxides of iron are in the copper, the conductivity of the wire reduces due to the higher resistance of the iron oxide. So it is in your best interest to install speaker wire made with pure copper like ours are. Another misnomer is that copper clad aluminum is the same quality as pure copper; this is false. The resistance (Ohms) between the two differ and as resistance in the cable increases the power delivered to the speaker is reduced. The sound will be lower and can lose some of its quality. If copper's conductivity, due to resistance, is rated at 100% then aluminum's conductivity would be rated at 61%. In order to deliver the same quality of sound with aluminum one would need a much larger gauge.Part No. 10G3-712SF -
This black 14 AWG (American Wire Gauge) 4 conductor Speaker cable is rated for outdoor use and/or direct burial. It comes in a 500 foot pull box and is ideal for running to exterior speakers in your backyard or outside the office. Each conductor (wire) is composed of 105 0.16mm strands made from pure copper which provides the optimal conductivity/low resistance to drive high quality audio to your speakers. Our speaker wire is made from pure copper. Some companies use the marketing term oxygen free copper which really means there is no iron oxide in the wire. When oxides of iron are in the copper, the conductivity of the wire reduces due to the higher resistance of the iron oxide. So it is in your best interest to install speaker wire made with pure copper like ours are. Another misnomer is that copper clad aluminum is the same quality as pure copper; this is false. The resistance (Ohms) between the two differ and as resistance in the cable increases the power delivered to the speaker is reduced. The sound will be lower and can lose some of its quality. If copper's conductivity, due to resistance, is rated at 100% then aluminum's conductivity would be rated at 61%. In order to deliver the same quality of sound with aluminum one would need a much larger gauge.Part No. 10G3-722SF -
This 500 foot 12 AWG, 2 conductor copper speaker wire is ideal for wiring the speakers in your home theater or house to your receiver. Featuring pure copper, this speaker cable is sure to deliver all the nuances in your audio media. Cable is dispensed in a convenient pullbox.Part No. 10G4-291SF -
This 6 foot cord features a standard US 3-prong plug on one end and bare wires on the other. This converts back and forth between a 3-prong power plug and a bare end. Perfect for special power applications. Color is black.Part No. 10W1-10106 -
RG58 / U Solid, 95% Braided, 1000 ft. This is a bulk reel of 1000 ft, no connectors. This cable is primarily used for connecting up Ethernet Coax systems.Part No. 10X1-022NH -
This 1000 foot Black BNC RG59/U 75 Ohm coaxial cable comes in easy to use pull boxes. Its primary use is for custom video runs for CCTV, Surveillance and Security video systems. The cable features a 20 AWG solid copper core.Part No. 10X3-022TH-20 -
This BNC cable is primarily used for connecting up video systems that use BNC connectors. This is a bulk spool, containing no connectors.Part No. 10X3-091TH-20 -
Our 1000 foot White Siamese/CCTV cables come in easy to deploy spools and provide excellent audio and video quality in both daylight and darkness. They are incredibly flexible which makes them very easy to install and provide high quality images for recording evidence or to help analyze an event. Our cable offers a 95% braid coverage which maintains adequate shielding against all types of interference throughout the run. They also feature a 20 AWG (American Wire Gauge) solid copper center conductor, which can provide a perfect signal up to 400 feet.Part No. 10X3-18291NH -
Our 500 foot White Siamese/CCTV cables come in easy to use pull boxes and provide excellent audio and video quality in both daylight and darkness. They are incredibly flexible which makes them very easy to install and provide high quality images for recording evidence or to help analyze an event. Our cable offers a 95% braid coverage which maintains adequate shielding against all types of interference throughout the run. They also feature a 20 AWG (American Wire Gauge) solid copper center conductor, which can provide a perfect signal up to 400 feet.Part No. 10X3-18291TF -
This high-quality coaxial cable can be used with your VCR, TV, Cable Box, Satellite Receivers, etc. Great for older devices that don't have RCA or any of the newer audio/video connections.Part No. 10X4-022NH -
This is our high quality F-Pin coaxial cable typically used with VCRs, TVs, cable boxes, satellite receivers, etc. With the 1000 ft spool you'll need to crimp the RG6 connectors onto it with our Crimping Tool, Part # 91D5-05500.Part No. 10X4-022TH -
This high quality coaxial cable can be used with your VCR, TV, Cable Box, Satellite Receivers, etc. Great for older devices that don't have RCA or any of the newer audio/video connections.Part No. 10X4-091NH -
This Black Quad Shielded RG6 Coaxial Cable is designed for use in environments with higher levels of interference. It is ideal for transmitting video signals for Cable TV, Satellite TV, CCTV, Security/Surveillance cameras and more. It features a RG6 Coaxial Cable constructed with an outer aluminum and magnesium braid layer (40% coverage), an aluminum foil layer, an inner braid constructed similarly as the outer but featuring 95% coverage and one more aluminum foil layer.Part No. 10X4-122NH -
Our RG6 cables provide excellent audio and video quality in both daylight and darkness. They are incredibly flexible which makes them very easy to install and provide high quality images.Part No. 10X4-122TH -
This bulk RG6 Siamese coaxial plus power cable consists of 2 cables side by side. The first cable is a standard RG6 coaxial cable with a pure copper center conductor. It is protected from interference by a braided shield with 95% coverage. The second cable is made up of 2 - 18AWG power wires. These are both pure copper, and are insulated separately with red and black jackets. RG6 Siamese cable with 18/2 power is intended for use with surveillance cameras that require BNC video and DC power.Part No. 10X4-18222NH -
Our RG6 cables provide excellent audio and video quality in both daylight and darkness. They are incredibly flexible which makes them very easy to install and provide high quality images.Part No. 10X4-191TH -
Bulk RG6U Coaxial Cable, White, 18 AWG Pure Copper Solid Core, 3 GHz, Pullbox, 1000 footPart No. 10X4-2091TH
