web analytics
Shop2024-07-25T13:56:07-04:00

View Products

    • Extends digital display signals with absolutely no degradation
    • Built-in connector design allows direct connection to source and display
    • Supports HDMI resolutions of up to 2160p 30hz
    • 3D ready with a Channel bandwidth of 10.2Gbps
    • Ideal for home cinema, medical, factory automation, public display installations etc.
    • Several different lengths available
    • Integrated cable ties can secure the cable to devices, equipment or other cables to prevent it from being accidentally disconnected
    • Dimensions: 59.3 x 48 x 25mm (WxDxH)
    • 2 year warranty
    Part No. 38073
  • This is an aqua bulk 1000 foot spool of plenum fiber optic distribution cable intended for large installations of short range runs at 10 Gigabit speeds. It is composed of 6 multimode fibers (50 micron core) inside an Aramid yarn wrapped in a aqua PVC outer jacket. Multimode fiber is optimized to work with fiber optic equipment using light wave lengths of 850nm (nanometers) or 1300nm. The cladding diameter is 125 microns. The Graded-Step core and cladding of our aqua bulk 50/125 distribution fiber optic cable is constructed using a high quality multimode fiber that is compliant with TIA/EIA 455-220A and IEC 60793-1-49. It also maintains compliance with legacy and LED based systems per TIA/EIA 455-204 and IEC 607-1-41. This particular cable is Plenum Rated. Plenum spaces are the area between floors or above office areas for heating/cooling airflow. If an office were to catch fire, this plenum area could easily allow the spread of the fire to more floors or across the entire building. Plenum rated cables are jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP) for less toxicity during a fire.
    Part No. 11F2-306NH
  • Armored Plenum 12 Strand Indoor/Outdoor Fiber Optic Distribution Cable, OM1 62.5/125 Multimode, Corning Optical Fiber, Black, Spool, 500 foot
  • Security/Alarm Wire, Gray, 18/6 (18AWG 6 Conductor), Stranded, CM / Inwall rated, Spool, 1000 foot
  • This is a orange bulk 1000 foot spool of fiber optic distribution cable intended for large installations of short range runs at LAN Speeds. It is composed of 6 multimode fibers (62.5 micron core) inside an Aramid yarn wrapped in a orange PVC outer jacket. Multimode fiber is optimized to work with fiber optic equipment using light wave lengths of 850nm (nanometers) or 1300nm. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. The Graded-Step core and cladding of our orange bulk 62.5/125 distribution fiber optic cable is constructed using a high quality multimode fiber that is compliant with TIA/EIA 492AAAA-A, IEC 60793-2-10 and ISO/IEC 111801 (type OM1 fiber). This particular cable is Riser Rated (CMR) meaning it complies with UL-1666. It is for usage in vertical tray applications without environmental air. Examples being: cable runs between floors through cable risers or in elevator shafts. These cables self extinguish and prevent the flame from traveling up the cable in a vertical burn test. This fiber optic cable is solidly constructed, UL rated and RoHS Compliant.
    Part No. 10F2-206NH
  • This 1000 foot plenum coaxial cable spool. It has a solid core and comes in white. Both ends come bare so you can add the connectors of your choice, and cut it to the specifications you need.
    Part No. 11X3-18291NH
  • This is a black bulk 1000 foot spool of indoor/outdoor rated fiber optic distribution cable intended for large installations of short range runs at LAN Speeds. It is composed of 6 multimode fibers (62.5 micron core) inside a water blocking Aramid yarn wrapped in a black PVC outer jacket. Multimode fiber is optimized to work with fiber optic equipment using light wave lengths of 850nm (nanometers) or 1300nm. The cladding diameter is 125 microns. The Graded-Step core and cladding of our black bulk 62.5/125 indoor/outdoor fiber optic cable is constructed using a high quality multimode fiber that is compliant with TIA/EIA 492AAAA-A, IEC 60793-2-10 and ISO/IEC 111801 (type OM1 fiber). This particular cable is Riser Rated (CMR) meaning it complies with UL-1666. It is for usage in vertical tray applications without environmental air. Examples being: cable runs between floors through cable risers or in elevator shafts. These cables self extinguish and prevent the flame from traveling up the cable in a vertical burn test. This fiber optic cable is solidly constructed, UL rated and RoHS Compliant.
    Part No. 10F3-206NH
  • Plenum Security Cable, White, 18/6 (18 AWG 6 Conductor), Stranded, CMP, Spool, 1000 foot
  • Box of 20 - 1.75 inch Surface Mount Cable Raceway, Ivory, Straight 6 foot Section
  • Box of 20 - 1.75 inch Surface Mount Cable Raceway, White, Straight 6 foot Section
  • This is a black bulk 1000 foot spool of indoor/outdoor plenum rated fiber optic distribution cable intended for large installations of short range runs at LAN Speeds. It is composed of 6 multimode fibers (62.5 micron core) inside a water blocking Aramid yarn wrapped in a black PVC outer jacket. Multimode fiber is optimized to work with fiber optic equipment using light wave lengths of 850nm (nanometers) or 1300nm. The cladding diameter is 125 microns. The Graded-Step core and cladding of our black bulk 62.5/125 indoor/outdoor fiber optic cable is constructed using a high quality multimode fiber that is compliant with TIA/EIA 492AAAA-A, IEC 60793-2-10 and ISO/IEC 111801 (type OM1 fiber). This particular cable is Plenum Rated. Plenum spaces are the area between floors or above office areas for heating/cooling airflow. If an office were to catch fire, this plenum area could easily allow the spread of the fire to more floors or across the entire building. Plenum rated cables are jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP) for less toxicity during a fire.
    Part No. 11F3-206NH
  • 12 Fiber Indoor/Outdoor Fiber Optic Cable, Singlemode 9/125, OS2, Plenum Rated, Yellow, Spool, 1000ft
  • Shielded Plenum Security Cable, White, 18/6 (18 AWG 6 Conductor), Stranded, CMP, Spool, 1000 foot
    • Allows console operation at extended distances of up to 200m using CAT5/5e/6 cable
    • Local workstation may be connected using a suitable CAM, please click here
    • Connects to your USB keyboard and mouse and VGA monitor
    • Supports display resolutions of up to 1600 x 1200 @ 75m, 1024x768 @ 200m
    • Power supply included
    • Allows your USB keyboard, mouse and monitor to be located up to 200m away from your computer using low cost CAT5/5e cable
    • Provides a convenient and secure method of remotely locating workstations and fileservers without compromising control and convenience
    • Installs in minutes - no special software required
     
    Important: This product is solely for use with the MC5, MC5-IP ans SC5 KVM Switch range. It is not a standalone KVM Extender solution. The picture above shows front and rear views of a single unit. See our range of KVM Extenders.
    Part No. 39357
  • Armored Plenum 6 Strand Indoor Fiber Optic Distribution Cable, 10Gbit, OM4 50/125 Multimode, Corning Optical Fiber, Aqua, Spool, 500 foot
  • Shielded Security/Alarm Wire, Gray, 18/6 (18AWG 6 Conductor), Stranded, CM / Inwall rated, Spool, 1000 foot
  • Our gray plenum solid shielded Cat6 Ethernet cable is used for networking and phone infrastructure, and comes on a convenient spool. Cat6 cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. Our Cat6 Ethernet cable exceeds the EIA/TIA-568-C standard. In a typical residential environment, an in-wall rated cable will suffice. However, commercial installations of cabling will have more requirements. In commercial buildings, there will be an area between floors or above office areas for heating/cooling airflow called the plenum. If an office were to catch fire, this plenum area could easily allow the spread of the fire to more floors or across the entire building. Cables that do not have a jacket rated for in wall or plenum use could actually cause the fire to become more intense. Plenum rated cables are jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP) for less toxicity during a fire. If a fire gets into a plenum rated area that contains plenum rated cables and the fire spreads, the cables will not be to blame. Plenum rated cables can help prevent the spread of fires, but keep in mind that a Plenum rated cable will have no data transmission speed benefit over a non-plenum rated cable.
    Part No. 11X8-521NH
  • Our black plenum solid Cat6 Ethernet cable is used for networking and phone infrastructure, and comes on a a convenient spool. Cat6 Cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a plenum rated black solid bulk cable. The individual conductors are 23 AWG (American wire gauge) solid pure copper. Our Cat6 Ethernet cable exceeds the EIA/TIA-568-C standard. In a typical residential environment, an in-wall rated cable will suffice. However, commercial installations of cabling will have more requirements. In commercial buildings, there will be an area between floors or above office areas for heating/cooling airflow called the Plenum. If an office were to catch fire, this plenum area could easily allow the spread of the fire to more floors or across the entire building. Cables that do not have a jacket rated for in wall or plenum use could actually cause the fire to become more intense. Plenum rated cables are jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP) for less toxicity during a fire. If a fire gets into a plenum rated area that contains plenum rated cables and the fire spreads, the cables will not be to blame.
    Part No. 11X8-522NH
  • Our orange plenum solid shielded Cat6 Ethernet cable is used for networking and phone infrastructure, and comes on a convenient spool. Cat6 cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. Our Cat6 Ethernet cable exceeds the EIA/TIA-568-C standard. In a typical residential environment, an in-wall rated cable will suffice. However, commercial installations of cabling will have more requirements. In commercial buildings, there will be an area between floors or above office areas for heating/cooling airflow called the plenum. If an office were to catch fire, this plenum area could easily allow the spread of the fire to more floors or across the entire building. Cables that do not have a jacket rated for in wall or plenum use could actually cause the fire to become more intense. Plenum rated cables are jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP) for less toxicity during a fire. If a fire gets into a plenum rated area that contains plenum rated cables and the fire spreads, the cables will not be to blame. Plenum rated cables can help prevent the spread of fires, but keep in mind that a Plenum rated cable will have no data transmission speed benefit over a non-plenum rated cable. Please note that due to the thickness of this cable, no male connectors will fit. This cable is intended to be punched down in a keystone jack, or into a patch panel.
    Part No. 11X8-531NH
  • Our green plenum solid shielded Cat6 Ethernet cable is used for networking and phone infrastructure, and comes on a convenient spool. Cat6 cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. Our Cat6 Ethernet cable exceeds the EIA/TIA-568-C standard. In a typical residential environment, an in-wall rated cable will suffice. However, commercial installations of cabling will have more requirements. In commercial buildings, there will be an area between floors or above office areas for heating/cooling airflow called the plenum. If an office were to catch fire, this plenum area could easily allow the spread of the fire to more floors or across the entire building. Cables that do not have a jacket rated for in wall or plenum use could actually cause the fire to become more intense. Plenum rated cables are jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP) for less toxicity during a fire. If a fire gets into a plenum rated area that contains plenum rated cables and the fire spreads, the cables will not be to blame. Plenum rated cables can help prevent the spread of fires, but keep in mind that a Plenum rated cable will have no data transmission speed benefit over a non-plenum rated cable. Please note that due to the thickness of this cable, no male connectors will fit. This cable is intended to be punched down in a keystone jack, or into a patch panel.
    Part No. 11X8-551NH
  • Our blue plenum solid shielded Cat6 Ethernet cable is used for networking and phone infrastructure, and comes on a convenient spool. Cat6 cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. Our Cat6 Ethernet cable exceeds the EIA/TIA-568-C standard. In a typical residential environment, an in-wall rated cable will suffice. However, commercial installations of cabling will have more requirements. In commercial buildings, there will be an area between floors or above office areas for heating/cooling airflow called the plenum. If an office were to catch fire, this plenum area could easily allow the spread of the fire to more floors or across the entire building. Cables that do not have a jacket rated for in wall or plenum use could actually cause the fire to become more intense. Plenum rated cables are jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP) for less toxicity during a fire. If a fire gets into a plenum rated area that contains plenum rated cables and the fire spreads, the cables will not be to blame. Plenum rated cables can help prevent the spread of fires, but keep in mind that a Plenum rated cable will have no data transmission speed benefit over a non-plenum rated cable. This cable is shielded for use in heavy electronic environments.
    Part No. 11X8-561NH
  • Our red plenum solid shielded Cat6 Ethernet cable is used for networking and phone infrastructure, and comes on a convenient spool. Cat6 cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. Our Cat6 Ethernet cable exceeds the EIA/TIA-568-C standard. In a typical residential environment, an in-wall rated cable will suffice. However, commercial installations of cabling will have more requirements. In commercial buildings, there will be an area between floors or above office areas for heating/cooling airflow called the plenum. If an office were to catch fire, this plenum area could easily allow the spread of the fire to more floors or across the entire building. Cables that do not have a jacket rated for in wall or plenum use could actually cause the fire to become more intense. Plenum rated cables are jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP) for less toxicity during a fire. If a fire gets into a plenum rated area that contains plenum rated cables and the fire spreads, the cables will not be to blame. Plenum rated cables can help prevent the spread of fires, but keep in mind that a Plenum rated cable will have no data transmission speed benefit over a non-plenum rated cable.
    Part No. 11X8-571NH
  • Our yellow plenum solid Cat6 Ethernet cable comes in easy to use spools. It is used for networking and phone infrastructure. Cat6 Cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This cable is a plenum rated yellow solid bulk cable. The individual conductors are 23 AWG (American wire gauge) solid pure copper. Our Cat6 Ethernet cable exceeds the EIA/TIA-568-C standard. In a typical residential environment, an in-wall rated cable will suffice. However, commercial installations of cabling will have more requirements. In commercial buildings, there will be an area between floors or above office areas for heating/cooling airflow called the Plenum. If an office were to catch fire, this plenum area could easily allow the spread of the fire to more floors or across the entire building. Cables that do not have a jacket rated for in wall or plenum use could actually cause the fire to become more intense. Plenum rated cables are jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP) for less toxicity during a fire. If a fire gets into a plenum rated area that contains plenum rated cables and the fire spreads, the cables will not be to blame.
    Part No. 11X8-581NH
  • Rackmount Fixed Wall Mount Cabinet, 12U. This 12U Fixed Wallmount Cabinets are a cost effective solution when you need to mount equipment securely on the wall. Mounting in just minutes, our fixed wall racks have a sleek tempered glass door and removable locking side panels. Each rack has one set of fully adjustable cage-nut style rails and removable top and bottom cable slot panels, allowing easy installation of CAT5 or fiber optic cables.
    Part No. 61C2-11212
Go to Top