web analytics
Shop2024-07-25T13:56:07-04:00

View Products

  • Shielded Security/Alarm Wire, Gray, 18/6 (18AWG 6 Conductor), Stranded, CM / Inwall rated, Spool, 1000 foot
  • Our gray plenum solid shielded Cat6 Ethernet cable is used for networking and phone infrastructure, and comes on a convenient spool. Cat6 cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. Our Cat6 Ethernet cable exceeds the EIA/TIA-568-C standard. In a typical residential environment, an in-wall rated cable will suffice. However, commercial installations of cabling will have more requirements. In commercial buildings, there will be an area between floors or above office areas for heating/cooling airflow called the plenum. If an office were to catch fire, this plenum area could easily allow the spread of the fire to more floors or across the entire building. Cables that do not have a jacket rated for in wall or plenum use could actually cause the fire to become more intense. Plenum rated cables are jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP) for less toxicity during a fire. If a fire gets into a plenum rated area that contains plenum rated cables and the fire spreads, the cables will not be to blame. Plenum rated cables can help prevent the spread of fires, but keep in mind that a Plenum rated cable will have no data transmission speed benefit over a non-plenum rated cable.
    Part No. 11X8-521NH
  • Our black plenum solid Cat6 Ethernet cable is used for networking and phone infrastructure, and comes on a a convenient spool. Cat6 Cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This particular cable is a plenum rated black solid bulk cable. The individual conductors are 23 AWG (American wire gauge) solid pure copper. Our Cat6 Ethernet cable exceeds the EIA/TIA-568-C standard. In a typical residential environment, an in-wall rated cable will suffice. However, commercial installations of cabling will have more requirements. In commercial buildings, there will be an area between floors or above office areas for heating/cooling airflow called the Plenum. If an office were to catch fire, this plenum area could easily allow the spread of the fire to more floors or across the entire building. Cables that do not have a jacket rated for in wall or plenum use could actually cause the fire to become more intense. Plenum rated cables are jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP) for less toxicity during a fire. If a fire gets into a plenum rated area that contains plenum rated cables and the fire spreads, the cables will not be to blame.
    Part No. 11X8-522NH
  • Our orange plenum solid shielded Cat6 Ethernet cable is used for networking and phone infrastructure, and comes on a convenient spool. Cat6 cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. Our Cat6 Ethernet cable exceeds the EIA/TIA-568-C standard. In a typical residential environment, an in-wall rated cable will suffice. However, commercial installations of cabling will have more requirements. In commercial buildings, there will be an area between floors or above office areas for heating/cooling airflow called the plenum. If an office were to catch fire, this plenum area could easily allow the spread of the fire to more floors or across the entire building. Cables that do not have a jacket rated for in wall or plenum use could actually cause the fire to become more intense. Plenum rated cables are jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP) for less toxicity during a fire. If a fire gets into a plenum rated area that contains plenum rated cables and the fire spreads, the cables will not be to blame. Plenum rated cables can help prevent the spread of fires, but keep in mind that a Plenum rated cable will have no data transmission speed benefit over a non-plenum rated cable. Please note that due to the thickness of this cable, no male connectors will fit. This cable is intended to be punched down in a keystone jack, or into a patch panel.
    Part No. 11X8-531NH
  • Our green plenum solid shielded Cat6 Ethernet cable is used for networking and phone infrastructure, and comes on a convenient spool. Cat6 cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. Our Cat6 Ethernet cable exceeds the EIA/TIA-568-C standard. In a typical residential environment, an in-wall rated cable will suffice. However, commercial installations of cabling will have more requirements. In commercial buildings, there will be an area between floors or above office areas for heating/cooling airflow called the plenum. If an office were to catch fire, this plenum area could easily allow the spread of the fire to more floors or across the entire building. Cables that do not have a jacket rated for in wall or plenum use could actually cause the fire to become more intense. Plenum rated cables are jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP) for less toxicity during a fire. If a fire gets into a plenum rated area that contains plenum rated cables and the fire spreads, the cables will not be to blame. Plenum rated cables can help prevent the spread of fires, but keep in mind that a Plenum rated cable will have no data transmission speed benefit over a non-plenum rated cable. Please note that due to the thickness of this cable, no male connectors will fit. This cable is intended to be punched down in a keystone jack, or into a patch panel.
    Part No. 11X8-551NH
  • Our blue plenum solid shielded Cat6 Ethernet cable is used for networking and phone infrastructure, and comes on a convenient spool. Cat6 cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. Our Cat6 Ethernet cable exceeds the EIA/TIA-568-C standard. In a typical residential environment, an in-wall rated cable will suffice. However, commercial installations of cabling will have more requirements. In commercial buildings, there will be an area between floors or above office areas for heating/cooling airflow called the plenum. If an office were to catch fire, this plenum area could easily allow the spread of the fire to more floors or across the entire building. Cables that do not have a jacket rated for in wall or plenum use could actually cause the fire to become more intense. Plenum rated cables are jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP) for less toxicity during a fire. If a fire gets into a plenum rated area that contains plenum rated cables and the fire spreads, the cables will not be to blame. Plenum rated cables can help prevent the spread of fires, but keep in mind that a Plenum rated cable will have no data transmission speed benefit over a non-plenum rated cable. This cable is shielded for use in heavy electronic environments.
    Part No. 11X8-561NH
  • Our red plenum solid shielded Cat6 Ethernet cable is used for networking and phone infrastructure, and comes on a convenient spool. Cat6 cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. Our Cat6 Ethernet cable exceeds the EIA/TIA-568-C standard. In a typical residential environment, an in-wall rated cable will suffice. However, commercial installations of cabling will have more requirements. In commercial buildings, there will be an area between floors or above office areas for heating/cooling airflow called the plenum. If an office were to catch fire, this plenum area could easily allow the spread of the fire to more floors or across the entire building. Cables that do not have a jacket rated for in wall or plenum use could actually cause the fire to become more intense. Plenum rated cables are jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP) for less toxicity during a fire. If a fire gets into a plenum rated area that contains plenum rated cables and the fire spreads, the cables will not be to blame. Plenum rated cables can help prevent the spread of fires, but keep in mind that a Plenum rated cable will have no data transmission speed benefit over a non-plenum rated cable.
    Part No. 11X8-571NH
  • Our yellow plenum solid Cat6 Ethernet cable comes in easy to use spools. It is used for networking and phone infrastructure. Cat6 Cable is used in network applications and has been designed specifically for Gigabit Ethernet applications. They perform at high-data transfer rates, and work with ATM and gigabit speed products. This cable is a plenum rated yellow solid bulk cable. The individual conductors are 23 AWG (American wire gauge) solid pure copper. Our Cat6 Ethernet cable exceeds the EIA/TIA-568-C standard. In a typical residential environment, an in-wall rated cable will suffice. However, commercial installations of cabling will have more requirements. In commercial buildings, there will be an area between floors or above office areas for heating/cooling airflow called the Plenum. If an office were to catch fire, this plenum area could easily allow the spread of the fire to more floors or across the entire building. Cables that do not have a jacket rated for in wall or plenum use could actually cause the fire to become more intense. Plenum rated cables are jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP) for less toxicity during a fire. If a fire gets into a plenum rated area that contains plenum rated cables and the fire spreads, the cables will not be to blame.
    Part No. 11X8-581NH
  • Rackmount Fixed Wall Mount Cabinet, 12U. This 12U Fixed Wallmount Cabinets are a cost effective solution when you need to mount equipment securely on the wall. Mounting in just minutes, our fixed wall racks have a sleek tempered glass door and removable locking side panels. Each rack has one set of fully adjustable cage-nut style rails and removable top and bottom cable slot panels, allowing easy installation of CAT5 or fiber optic cables.
    Part No. 61C2-11212
  • Armored 12 Strand Indoor/Outdoor Fiber Optic Distribution Cable, 10Gbit, OM3 50/125 Multimode, Corning Optical Fiber, Riser Rated, Black, Spool, 500 foot
  • Armored Plenum 12 Strand Indoor Fiber Optic Distribution Cable, OM1 62.5/125 Multimode, Corning Optical Fiber, Orange, Spool, 500 foot
  • This is a 6-fiber orange 500 foot spool of fiber optic distribution cable intended for large installations of short range runs at LAN Speeds. It is composed of 6 multimode fibers (62.5 micron core) inside an Aramid yarn wrapped in an orange PVC outer jacket. Multimode fiber is optimized to work with fiber optic equipment using light wave lengths of 850nm (nanometers) or 1300nm. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. The armor eliminates the need for a separate conduit. The Graded-Step core and cladding of our orange bulk 62.5/125 distribution fiber optic cable is constructed using a high quality multimode fiber that is compliant with TIA/EIA 492AAAA-A, IEC 60793-2-10 and ISO/IEC 111801 (type OM1 fiber). This particular cable is Plenum Rated. Plenum spaces are the area between floors or above office areas for heating/cooling airflow. If an office were to catch fire, this plenum area could easily allow the spread of the fire to more floors or across the entire building. Plenum rated cables are jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP) for less toxicity during a fire. * This is not gopher cable.
    Part No. 13F2-206NF
    • Supports up to 32 USB & VGA and PS/2 & VGA equipped computers
    • Supports VGA resolutions up to 1920x1200
    • Port switching via hotkey, On-Screen Display or front panel buttons
    • PCs are connected via dedicated KVM modules (not included) at distances of up to 100m via Cat5e/6
    • 2 year warranty

     

    A KVM switch allows an operator to conveniently control and manage multiple devices, such as PCs and servers, from a single keyboard, mouse and display console.

     

    The Lindy Combo KVM Switch is a hardware solution that allows direct control of multiple computers using a single keyboard, mouse and VGA monitor. It's ideal for system administrators who want to control multiple computers or servers from a single, centralised location.

     

    The switch occupies only a single 1U space in a 19” rack and supports screen resolutions of up to 1920x1200, great for ensuring optimum clarity if used in digital media or graphic design scenarios. It provides 3 simple switching modes, via keyboard hotkeys, front panel buttons and On-Screen Display; setup and management options can be access only via the OSD.

     

    A local console can be connected to the 2 USB and VGA ports on the rear panel while a Daisy Chain VGA port can be used to connect up to 8 Lindy Combo series switches in order to manage to up to 256 multi platform computers with security features, password access and auto log out, perfect for large-scale control systems in transport hubs or surveillance centres. All the functions are accessible from the administrator through a simple to use On-Screen Display.

     

    PCs & connected KVM switches can be remove easily with hot plug support*, allowing for maintenance to take place without the need for powering down all connected devices, essential within "always on" environments such as data centres or traffic management setups.

     

    Computers or servers can be connected to the 32 host ports on the rear panel via Cat5e/6 cables ad distances of up to 100m using USB+VGA (39634) or PS/2+VGA (39633) dedicated KVM modules (not included).

     

    *Hot plug is supported only if the OS of the connected PC supports this function

    "
  • Armored Plenum 12 Strand Indoor Fiber Optic Distribution Cable, 10Gbit, OM3 50/125 Multimode, Corning Optical Fiber, Aqua, Spool, 500 foot
  • Ensure a tamper-proof data storage solution by making it unalterable to keep the crucial files safe with Flexxon Read-Only Mode SSD. Once you activate the Read-Only mode into the SSD, all the stored data enables access for reading only and none can change, delete, or overwrite anything. Preserve the authenticity of essential files and prohibit the risk of alteration with the Read-Only Mode SSD.
    • Converts broadcast quality SDI video into digital 1080p HDMI
    • SDI pass through feature for viewing or extending
    • Can be used with any compatible HDMI display
    • Plug & Play - simple to install and use
    • Multi country power supply included
    • 2 year warranty
    Part No. 38098
    • 8 x VGA Female Connectors
    • Input and output modules can be mixed and added in increments of 8
    • Supports video resolutions up to WUXGA 1920x1200@60Hz
    • Supports Stereo audio signals
    • 2 Year Warranty

     

    Thank you for purchasing from the LINDY Modular Matrix range of products. This range of products is designed to allow you to create a matrix with 8, 16 or 32 input and output ports. The input ports can be a choice of HDMI, DVI or VGA while the output ports can be HDMI, DVI or C6 HDBaseT. Any of the inputs can be combined with any of the outputs to create a UHD 4Kx2K@30Hz display over distances of up to 100m. The modular design provides the ultimate in flexibility for audio and video distribution as a matrix, convertor or an extender in retail product demonstration, training and public display application in schools, pubs etc.

     

    The 8 Port 4K HDMI Input Modular Board is designed for use with 382503825138252 Chassis systems and 38253382543825538256 & 38259 range of modular boards.

    Part No. 38257
  • Ensure a tamper-proof data storage solution by making it unalterable to keep the crucial files safe with Flexxon Read-Only Mode SSD. Once you activate the Read-Only mode into the SSD, all the stored data enables access for reading only and none can change, delete, or overwrite anything. Preserve the authenticity of essential files and prohibit the risk of alteration with the Read-Only Mode SSD.
  • 24 Fiber Indoor Distribution Fiber Optic Cable, Singlemode, 9/125, Yellow, Riser Rated, Spool, 1000 foot
  • Our blue plenum solid Cat6a Ethernet cable is used for networking and phone infrastructure and comes in a convenient spool. Cat6a Cable is used in network applications and has been designed specifically for 10 Gigabit Ethernet applications. This particular cable is a plenum rated blue UTP (Unshielded Twisted Pair) bulk cable. The individual conductors are 23 AWG (American wire gauge) solid pure copper. Our Cat6a Ethernet cable exceeds the EIA/TIA-568-C standard. In a typical residential environment, an in-wall rated cable will suffice. However, commercial installations of cabling will have more requirements. In commercial buildings, there will be an area between floors or above office areas for heating/cooling airflow called the Plenum. If an office were to catch fire, this plenum area could easily allow the spread of the fire to more floors or across the entire building. Cables that do not have a jacket rated for in wall or plenum use could actually cause the fire to become more intense. Plenum rated cables are jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP) for less toxicity during a fire. If a fire gets into a plenum rated area that contains plenum rated cables and the fire spreads, the cables will not be to blame.
    Part No. 14X6-061NH
  • Our white plenum solid Cat6a Ethernet cable is used for networking and phone infrastructure and comes in a convenient spool. Cat6a Cable is used in network applications and has been designed specifically for 10 Gigabit Ethernet applications. This particular cable is a plenum rated white UTP (Unshielded Twisted Pair) bulk cable. The individual conductors are 23 AWG (American wire gauge) solid pure copper. Our Cat6a Ethernet cable exceeds the EIA/TIA-568-C standard. In a typical residential environment, an in-wall rated cable will suffice. However, commercial installations of cabling will have more requirements. In commercial buildings, there will be an area between floors or above office areas for heating/cooling airflow called the Plenum. If an office were to catch fire, this plenum area could easily allow the spread of the fire to more floors or across the entire building. Cables that do not have a jacket rated for in wall or plenum use could actually cause the fire to become more intense. Plenum rated cables are jacketed with a fire-retardant plastic jacket of either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP) for less toxicity during a fire. If a fire gets into a plenum rated area that contains plenum rated cables and the fire spreads, the cables will not be to blame.
    Part No. 14X6-091NH
  • 24 Fiber Indoor/Outdoor Fiber Optic Cable, Singlemode, 9/125, Black, Riser Rated, Spool, 1000 foot
    Part No. 10F3-024NH
  • Armored Plenum 12 Strand Indoor/Outdoor Fiber Optic Distribution Cable, OM3 50/125 Multimode, Corning Optical Fiber, Black, Spool, 500 foot
  • This high end switch is essential for more demanding applications. It enables up to 2 users to simultaneously access up to 8 PCs. In addition to this, one of the user control ports also incorporates a twisted-pair cable interface allowing these users to access the switch from a local or remote location of up to 200m away using low cost CAT5/5e/6 cable. This CPU Switch also boasts a number of additional 'goodies' such as redundant power supply support, individual On-Screen Display for each user, flash upgradeability, high video bandwidth and DDC support for "Plug & Play" monitors. SmartBoot feature automatically boots all machines during power up. Mixed AT & PS/2 keyboards and PS/2 & RS-232 mice supported as standard (control ports only support PS/2 mice). Channel switching by front panel keys, keyboard hotkeys or mouse button. Channel switch by On-Screen Display. Automatically restores keyboard and mouse states when channel is changed. Supports high bandwidth monitors up to 1900 x 1440. OVC circuit means Optimum Video Quality even over extended distances. Supports keyboard modes 1, 2 & 3, mouse prompt and stream modes for maximum compatibility. Supports LINDY mice, Microsoft IntelliMouse, Logitech Firstmouse+, MouseMan+ and other wheel mice. Supports IBM ThinkPad 'Y' cables. Power and activity indication confirm correct operation. Standard cable connections make installation easy and inexpensive. All ports are active simultaneously - the connected PCs may all be booted at the same time. Mouse restoration functions to enable 'hot plugging' of certain systems. Robust metal case ensures good shielding and video quality. Supports RS6000 computers. Screen saver, auto-scan and variable hotkey options. Confirmation of selected ports on local and cascaded CPU Switches. Twisted-pair control port, allowing remote access distance of up to 200m using CAT5/5e/6 cable - CAT5 Extender Junior, Extender Plus, Extender Pro or C5 Junior (Remote unit only) required. Support for up to 2 simultaneous users from up to 8 locations. Individual On-Screen Display for each user allowing computers to be selected by name. User logon option. Security access allowing the administrator to restrict certain computers to certain users only. Redundant power supply support for fail-safe operation. Flash upgrade-able - firmware can be upgraded by connecting the switch to a computer's serial port and running a download program (requires additional cable). DDC1/DDC2 support for "Plug & Play" monitors. Individual power-down reset for each user port without affecting another operation. Multiple channel cascadability. Comes complete with 19" rackmount kit (1U height). Made in Europe. 3 Year Warranty.
    Part No. 32362
Go to Top