-
Shielded Security/Alarm Wire, Gray, 18/2 (18AWG 2 Conductor), Stranded, CMR / Inwall rated, Pullbox, 1000 foot -
RG6U 18AWG Quad Shield, Pure Copper 3 GHz Coaxial Cable, White, 1000 ft, PullboxPart No. 10X4-2191TH -
RG6U 18AWG Quad Shield, Pure Copper 3 GHz Coaxial Cable, Black, 1000 ft, PullboxPart No. 10X4-2122TH -
Cut the cord! This cordless design glue gun lets you take the glue to your project instead of the project to the glue gun. requires 4 AA batteries, not included. Glue gun heats up in 3-4 minutes. Craft or repair anywhere around the house. LED light for working in dark places. Bracket stand. Uses 7.5mm diameter glue sticks. Comes with 3 glue sticks to get you startedPart No. 9005-10230 -
These Orange Band RG6 Quad Shield F-Pin Compression Connectors are perfect for use with outdoor cables or when a cable is placed in an area where it may be exposed to moisture. These connectors are designed to easily terminate your coax cables while creating a seamless, air-tight connection for your satellite or cable TV connection.
Part No. 31X4-32325 -
RG6 Quad Shield RCA Compression Connector Orange Band 25pcs-bag<-p>.
These RCA Compression Connectors will work with your Quad Shielded coax cables for a seamless, air-tight connection. These connectors are perfect for use with outdoor cables or when a cable is placed in an area where it may be exposed to moisture. This part comes with twenty five pieces per bag.<-p>
Part No. 31X4-32225 -
RG6 F-PIN Compression Connector Purple Band 25pcs-bag<-p>.
These RG6 F-PIN Compression Connectors will create a seamless connection for your satellite or cable TV. This part comes with ten pieces per bag and are designed to easily terminate your coax cables while creating a seamless, air-tight connection for your coax network.<-p>
Part No. 31X4-31325 -
RG6 RCA Compression Connector Purple Band 25pcs-bag<-p>.
These Purple Band RG6 RCA Compression Connectors are designed to easily terminate your coax cables while creating a seamless, air-tight connection for your coax network. This part comes with twenty five pieces per bag.<-p>
Part No. 31X4-31225 -
RG59 RCA Compression Connector Yellow Band 25pcs-bag<-p>.
These Yellow Band RG59 RCA Compression Connectors are designed for easy termination and will fit a variety of different size cables. This part comes with twenty five pieces per bag.<-p>
Part No. 31X3-31225 -
RG6 BNC Male Crimp On Connector, 2 Piece Set. This crimp BNC connector can be used to terminate stranded RG6 coax cable. Perfect for custom wiring jobs.Part No. 31X3-01420 -
This RG-58 / 59 / 6 BNC crimp tool works for crimping and cutting cable. This two-in-one action convenient gizmo will help you get your coax crimp job finished quickly and easily.Part No. 91D5-05500 -
This is a female DC power connector to a 2 pin terminal adapter. This works with DC male power to a 2 screw terminal from the power source.Part No. 30W1-00210 -
This is a DC Male Power Plug with 2 Pin Screw Terminals for connecting to a power source. This is perfect for connecting bare wires to a power supply. The DC connector is standard size.Part No. 30W1-00200 -
This compression crimping tool works on RG58, RG59, RG6, BNC, and RCA. Completely weatherproof for long-lasting durability. This tool will make terminating your compression connections a breeze.Part No. 30DR-8083RC -
Use this connection on an RG-6 cable to create a custom length BNC cable. BNC connectors are used for RF signal connections, for serial digital Interface video signals and analog signals.Part No. 200-141 -
This cable is constructed of two Cat6 cables (Blue and Grey) and two RG6 cables (Black and White) bundled inside of an outer jacket (CM Rated) and a maximum operating temperature of 75C. Each Cat6 cable is constructed with 4 solid copper 23AWG twisted pairs and a center spline. Jacket is CM Rated. Each RG6 coaxial cable is quad shielded 3.0 GHz: outer aluminum braid (40% coverage), outer double foil of aluminum, inner aluminum braid (60% coverage) and one more aluminum foil layer. The center conductor is CCS (copper clad steel)Part No. 14X4-161NF -
This Quad Shielded White RG6 cable comes in an easy to use and store 1000 foot pullbox. The cable is constructed of the following: outer jacket made from low smoke PVC, aluminum outer braid (40% coverage), aluminum mylar foil (25% overlap), inner aluminum braid (60% coverage), aluminum mylar foil (25% overlap), foam FEP (fluorinated ethylene propylene) dielectric and an 18AWG solid copper center conductor.Part No. 11X4-191TH -
Plenum RG6 Siamese Cable for Video and Power 1000ftPart No. 11X4-18291NH -
This 1000 foot plenum coaxial cable spool. It has a solid core and comes in white. Both ends come bare so you can add the connectors of your choice, and cut it to the specifications you need.Part No. 11X3-18291NH -
Outdoor runs of RG6 require cable that is specifically designed for that environment. Our direct burial/outdoor rated RG6 cable is UV rated for protection from direct sunlight. Using a cable that is not UV rated would cause the cable to deteriorate over time, and cause the signal to fail eventually. This cable can also be used for direct burial scenarios as well. Just dig a trench, and lay this cable in with the peace of mind that you will receive a reliable signal.Part No. 10X4-622NH -
Bulk RG6U Coaxial Cable, White, 18 AWG Pure Copper Solid Core, 3 GHz, Pullbox, 1000 footPart No. 10X4-2091TH -
Our RG6 cables provide excellent audio and video quality in both daylight and darkness. They are incredibly flexible which makes them very easy to install and provide high quality images.Part No. 10X4-191TH -
This bulk RG6 Siamese coaxial plus power cable consists of 2 cables side by side. The first cable is a standard RG6 coaxial cable with a pure copper center conductor. It is protected from interference by a braided shield with 95% coverage. The second cable is made up of 2 - 18AWG power wires. These are both pure copper, and are insulated separately with red and black jackets. RG6 Siamese cable with 18/2 power is intended for use with surveillance cameras that require BNC video and DC power.Part No. 10X4-18222NH -
Our RG6 cables provide excellent audio and video quality in both daylight and darkness. They are incredibly flexible which makes them very easy to install and provide high quality images.Part No. 10X4-122TH -
This Black Quad Shielded RG6 Coaxial Cable is designed for use in environments with higher levels of interference. It is ideal for transmitting video signals for Cable TV, Satellite TV, CCTV, Security/Surveillance cameras and more. It features a RG6 Coaxial Cable constructed with an outer aluminum and magnesium braid layer (40% coverage), an aluminum foil layer, an inner braid constructed similarly as the outer but featuring 95% coverage and one more aluminum foil layer.Part No. 10X4-122NH -
This high quality coaxial cable can be used with your VCR, TV, Cable Box, Satellite Receivers, etc. Great for older devices that don't have RCA or any of the newer audio/video connections.Part No. 10X4-091NH -
This is our high quality F-Pin coaxial cable typically used with VCRs, TVs, cable boxes, satellite receivers, etc. With the 1000 ft spool you'll need to crimp the RG6 connectors onto it with our Crimping Tool, Part # 91D5-05500.Part No. 10X4-022TH -
This high-quality coaxial cable can be used with your VCR, TV, Cable Box, Satellite Receivers, etc. Great for older devices that don't have RCA or any of the newer audio/video connections.Part No. 10X4-022NH -
Our 500 foot White Siamese/CCTV cables come in easy to use pull boxes and provide excellent audio and video quality in both daylight and darkness. They are incredibly flexible which makes them very easy to install and provide high quality images for recording evidence or to help analyze an event. Our cable offers a 95% braid coverage which maintains adequate shielding against all types of interference throughout the run. They also feature a 20 AWG (American Wire Gauge) solid copper center conductor, which can provide a perfect signal up to 400 feet.Part No. 10X3-18291TF -
Our 1000 foot White Siamese/CCTV cables come in easy to deploy spools and provide excellent audio and video quality in both daylight and darkness. They are incredibly flexible which makes them very easy to install and provide high quality images for recording evidence or to help analyze an event. Our cable offers a 95% braid coverage which maintains adequate shielding against all types of interference throughout the run. They also feature a 20 AWG (American Wire Gauge) solid copper center conductor, which can provide a perfect signal up to 400 feet.Part No. 10X3-18291NH -
This 500 foot 12 AWG, 2 conductor copper speaker wire is ideal for wiring the speakers in your home theater or house to your receiver. Featuring pure copper, this speaker cable is sure to deliver all the nuances in your audio media. Cable is dispensed in a convenient pullbox.Part No. 10G4-291SF -
This black 14 AWG (American Wire Gauge) 4 conductor Speaker cable is rated for outdoor use and/or direct burial. It comes in a 500 foot pull box and is ideal for running to exterior speakers in your backyard or outside the office. Each conductor (wire) is composed of 105 0.16mm strands made from pure copper which provides the optimal conductivity/low resistance to drive high quality audio to your speakers. Our speaker wire is made from pure copper. Some companies use the marketing term oxygen free copper which really means there is no iron oxide in the wire. When oxides of iron are in the copper, the conductivity of the wire reduces due to the higher resistance of the iron oxide. So it is in your best interest to install speaker wire made with pure copper like ours are. Another misnomer is that copper clad aluminum is the same quality as pure copper; this is false. The resistance (Ohms) between the two differ and as resistance in the cable increases the power delivered to the speaker is reduced. The sound will be lower and can lose some of its quality. If copper's conductivity, due to resistance, is rated at 100% then aluminum's conductivity would be rated at 61%. In order to deliver the same quality of sound with aluminum one would need a much larger gauge.Part No. 10G3-722SF -
This black 14 AWG (American Wire Gauge) 2 conductor Speaker cable is rated for outdoor use and/or direct burial. It comes in a 500 foot pull box and is ideal for running to exterior speakers in your backyard or outside the office. Each conductor (wire) is composed of 105 0.16mm strands made from pure copper which provides the optimal conductivity/low resistance to drive high quality audio to your speakers. Our speaker wire is made from pure copper. Some companies use the marketing term oxygen free copper which really means there is no iron oxide in the wire. When oxides of iron are in the copper, the conductivity of the wire reduces due to the higher resistance of the iron oxide. So it is in your best interest to install speaker wire made with pure copper like ours are. Another misnomer is that copper clad aluminum is the same quality as pure copper; this is false. The resistance (Ohms) between the two differ and as resistance in the cable increases the power delivered to the speaker is reduced. The sound will be lower and can lose some of its quality. If copper's conductivity, due to resistance, is rated at 100% then aluminum's conductivity would be rated at 61%. In order to deliver the same quality of sound with aluminum one would need a much larger gauge.Part No. 10G3-712SF -
This white 14 AWG (American Wire Gauge) 4 conductor Speaker cable is CM rated for in-wall use, though it need not be used strictly in-wall. It comes in a 500 foot pull box and is ideal for wiring the speakers in your home theater or house to your receiver. Each conductor (wire) is composed of 105 0.16 mm strands made from pure copper which provides the optimal conductivity/low resistance to drive high quality audio to your speakers. Our speaker wire is made from pure copper. Some companies use the marketing term oxygen free copper which really means there is no iron oxide in the wire. When oxides of iron are in the copper, the conductivity of the wire reduces due to the higher resistance of the iron oxide. So it is in your best interest to install speaker wire made with pure copper like ours are. Another misnomer is that copper clad aluminum is the same quality as pure copper; this is false. The resistance (Ohms) between the two differ and as resistance in the cable increases the power delivered to the speaker is reduced. The sound will be lower and can lose some of its quality. If copper's conductivity, due to resistance, is rated at 100% then aluminum's conductivity would be rated at 61%. In order to deliver the same quality of sound with aluminum one would need a much larger gauge.Part No. 10G3-491SF -
This white 14 AWG (American Wire Gauge) 2 conductor Speaker cable is CM rated for in-wall use, though it need not be used strictly in-wall. It comes in a 500 foot pull box and is ideal for wiring the speakers in your home theater or house to your receiver. Each conductor (wire) is composed of 105 0.16 mm strands made from pure copper which provides the optimal conductivity/low resistance to drive high quality audio to your speakers. Our speaker wire is made from pure copper. Some companies use the marketing term oxygen free copper which really means there is no iron oxide in the wire. When oxides of iron are in the copper, the conductivity of the wire reduces due to the higher resistance of the iron oxide. So it is in your best interest to install speaker wire made with pure copper like ours are. Another misnomer is that copper clad aluminum is the same quality as pure copper; this is false. The resistance (Ohms) between the two differ and as resistance in the cable increases the power delivered to the speaker is reduced. The sound will be lower and can lose some of its quality. If copper's conductivity, due to resistance, is rated at 100% then aluminum's conductivity would be rated at 61%. In order to deliver the same quality of sound with aluminum one would need a much larger gauge.Part No. 10G3-291SF -
This black 16 AWG (American Wire Gauge) 4 conductor Speaker cable is rated for outdoor use and/or direct burial. It comes in a 500 foot pull box and is ideal for running to exterior speakers in your backyard or outside the office. Each conductor (wire) is composed of 65 0.16mm strands made from pure copper which provides the optimal conductivity/low resistance to drive high quality audio to your speakers. Our speaker wire is made from pure copper. Some companies use the marketing term oxygen free copper which really means there is no iron oxide in the wire. When oxides of iron are in the copper, the conductivity of the wire reduces due to the higher resistance of the iron oxide. So it is in your best interest to install speaker wire made with pure copper like ours are. Another misnomer is that copper clad aluminum is the same quality as pure copper; this is false. The resistance (Ohms) between the two differ and as resistance in the cable increases the power delivered to the speaker is reduced. The sound will be lower and can lose some of its quality. If copper's conductivity, due to resistance, is rated at 100% then aluminum's conductivity would be rated at 61%. In order to deliver the same quality of sound with aluminum one would need a much larger gauge.Part No. 10G2-722SF -
This white 16 AWG (American Wire Gauge) 4 conductor Speaker cable is CM rated for in-wall use, though it need not be used strictly in-wall. It comes in a 500 foot pull box and is ideal for wiring the speakers in your home theater or house to your receiver. Each conductor (wire) is composed of 65 0.16 mm strands made from pure copper which provides the optimal conductivity/low resistance to drive high quality audio to your speakers. Our speaker wire is made from pure copper. Some companies use the marketing term oxygen free copper which really means there is no iron oxide in the wire. When oxides of iron are in the copper, the conductivity of the wire reduces due to the higher resistance of the iron oxide. So it is in your best interest to install speaker wire made with pure copper like ours are. Another misnomer is that copper clad aluminum is the same quality as pure copper; this is false. The resistance (Ohms) between the two differ and as resistance in the cable increases the power delivered to the speaker is reduced. The sound will be lower and can lose some of its quality. If copper's conductivity, due to resistance, is rated at 100% then aluminum's conductivity would be rated at 61%. In order to deliver the same quality of sound with aluminum one would need a much larger gauge.Part No. 10G2-491SF -
This white 16 AWG (American Wire Gauge) 2 conductor Speaker cable is CM rated for in-wall use, though it need not be used strictly in-wall. It comes in a 500 foot pull box and is ideal for wiring the speakers in your home theater or house to your receiver. Each conductor (wire) is composed of 65 0.16 mm strands made from pure copper which provides the optimal conductivity/low resistance to drive high quality audio to your speakers. Our speaker wire is made from pure copper. Some companies use the marketing term oxygen free copper which really means there is no iron oxide in the wire. When oxides of iron are in the copper, the conductivity of the wire reduces due to the higher resistance of the iron oxide. So it is in your best interest to install speaker wire made with pure copper like ours are. Another misnomer is that copper clad aluminum is the same quality as pure copper; this is false. The resistance (Ohms) between the two differ and as resistance in the cable increases the power delivered to the speaker is reduced. The sound will be lower and can lose some of its quality. If copper's conductivity, due to resistance, is rated at 100% then aluminum's conductivity would be rated at 61%. In order to deliver the same quality of sound with aluminum one would need a much larger gauge.Part No. 10G2-291SF
The Connectivity Center is a supplier of some of the leading physical cybersecurity technologies and physical data security products. We pride ourselves in quality, value, variety, and versatility. We want to be a one-stop shop for most of your physical cybersecurity needs, and we love to serve our partners in this evolving industry.
ACCOUNT
RESOURCES
INFO
The Connectivity Center is committed to ensuring that its website is accessible to people with disabilities. We strive to have all pages on our website meet W3C Web Content Accessibility Guidelines 2.0, Level AA conformance. Any issues should be reported to mail@connectivitycenter.com.
Copyright © 2012 –    |   The Connectivity Center   |   All Rights Reserved   |   Powered by LeadWorks
