Part No. 10F1-001NH
-
This is a yellow bulk 1000 foot spool of Zipcord fiber optic cable intended for large installations where you are completing the terminations. It is a singlemode fiber (9 micron core) designed to transmit data across long distances at high speeds. Single mode fiber is optimized to work with fiber optic equipment using light wave lengths of 1310nm (nanometers) or 1550nm. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. The core and cladding of our yellow bulk 9/125 fiber optic cable is constructed using a high quality singlemode fiber that is ITU-T G.652.D compliant and backwards compatible with other legacy singlemode fibers. This particular cable is Riser Rated (CMR) meaning it complies with UL-1666. It is for usage in vertical tray applications without environmental air. Examples being: cable runs between floors through cable risers or in elevator shafts. These cables self extinguish and prevent the flame from traveling up the cable in a vertical burn test. This fiber optic cable is solidly constructed, UL rated and RoHS Compliant. -
This is a orange bulk 1000 foot spool of Zipcord fiber optic cable intended for large installations where you are completing the terminations. It is a multimode fiber (62.5 micron core) designed to transmit data across shorter distances at LAN speeds. Multimode fiber is optimized to work with fiber optic equipment using light wave lengths of 850nm (nanometers) or 1300nm. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. The Graded-Step core and cladding of our orange bulk 62.5/125 fiber optic cable is constructed using a high quality multimode fiber that is compliant with TIA/EIA 492AAAA-A, IEC 60793-2-10 and ISO/IEC 111801 (type OM1 fiber). This particular cable is Riser Rated (CMR) meaning it complies with UL-1666. It is for usage in vertical tray applications without environmental air. Examples being: cable runs between floors through cable risers or in elevator shafts. These cables self extinguish and prevent the flame from traveling up the cable in a vertical burn test. This fiber optic cable is solidly constructed, UL rated and RoHS Compliant.Part No. 10F1-111NH -
This is a aqua bulk 1000 foot spool of Zipcord fiber optic cable intended for large installations where you are completing the terminations. It is a multimode fiber (50 micron core) designed to transmit data across shorter distances at 10 Gigabit speeds. Multimode fiber is optimized to work with fiber optic equipment using light wave lengths of 850nm (nanometers) or 1300nm. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. The Graded-Step core and cladding of our aqua bulk 50/125 fiber optic cable is constructed using a high quality multimode fiber that is compliant with TIA/EIA 455-220A and IEC 60793-1-49. It also maintains compliance with legacy and LED based systems per TIA/EIA 455-204 and IEC 607-1-41. This particular cable is Riser Rated (CMR) meaning it complies with UL-1666. It is for usage in vertical tray applications without environmental air. Examples being: cable runs between floors through cable risers or in elevator shafts. These cables self extinguish and prevent the flame from traveling up the cable in a vertical burn test. This fiber optic cable is solidly constructed, UL rated and RoHS Compliant.Part No. 10F1-301NH -
This is a yellow bulk 1000 foot spool of fiber optic distribution cable intended for long distance runs at high speeds. It is composed of 2 singlemode fibers (9 micron core) inside an Aramid yarn wrapped in a yellow PVC outer jacket. Single mode fiber is optimized to work with fiber optic equipment using light wave lengths of 1310nm (nanometers) or 1550nm. The cladding diameter is 125 microns. The core and cladding of our yellow bulk distribution fiber optic cable is constructed using a high quality singlemode fiber that is ITU-T G.652.D compliant and backwards compatible with other legacy singlemode fibers. This particular cable is Riser Rated (CMR) meaning it complies with UL-1666. It is for usage in vertical tray applications without environmental air. Examples being: cable runs between floors through cable risers or in elevator shafts. These cables self extinguish and prevent the flame from traveling up the cable in a vertical burn test. This fiber optic cable is solidly constructed, UL rated and RoHS Compliant.Part No. 10F2-002NH -
This is a yellow bulk 1000 foot spool of fiber optic distribution cable intended for long distance runs at high speeds. It is composed of 6 singlemode fibers (9 micron core) inside an Aramid yarn wrapped in a yellow PVC outer jacket. Single mode fiber is optimized to work with fiber optic equipment using light wave lengths of 1310nm (nanometers) or 1550nm. The cladding diameter is 125 microns. The core and cladding of our yellow bulk distribution fiber optic cable is constructed using a high quality singlemode fiber that is ITU-T G.652.D compliant and backwards compatible with other legacy singlemode fibers. This particular cable is Riser Rated (CMR) meaning it complies with UL-1666. It is for usage in vertical tray applications without environmental air. Examples being: cable runs between floors through cable risers or in elevator shafts. These cables self extinguish and prevent the flame from traveling up the cable in a vertical burn test. This fiber optic cable is solidly constructed, UL rated and RoHS Compliant.Part No. 10F2-006NH -
This is a yellow bulk 1000 foot spool of fiber optic distribution cable intended for long distance runs at high speeds. It is composed of 12 singlemode fibers (9 micron core) inside an Aramid yarn wrapped in a yellow PVC outer jacket. Single mode fiber is optimized to work with fiber optic equipment using light wave lengths of 1310nm (nanometers) or 1550nm. The cladding diameter is 125 microns. The core and cladding of our yellow bulk distribution fiber optic cable is constructed using a high quality singlemode fiber that is ITU-T G.652.D compliant and backwards compatible with other legacy singlemode fibers. This particular cable is Riser Rated (CMR) meaning it complies with UL-1666. It is for usage in vertical tray applications without environmental air. Examples being: cable runs between floors through cable risers or in elevator shafts. These cables self extinguish and prevent the flame from traveling up the cable in a vertical burn test. This fiber optic cable is solidly constructed, UL rated and RoHS Compliant.Part No. 10F2-012NH -
This is a orange bulk 1000 foot spool of fiber optic distribution cable intended for large installations of short range runs at LAN Speeds. It is composed of 2 multimode fibers (62.5 micron core) inside an Aramid yarn wrapped in a orange PVC outer jacket. Multimode fiber is optimized to work with fiber optic equipment using light wave lengths of 850nm (nanometers) or 1300nm. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. The Graded-Step core and cladding of our orange bulk 62.5/125 distribution fiber optic cable is constructed using a high quality multimode fiber that is compliant with TIA/EIA 492AAAA-A, IEC 60793-2-10 and ISO/IEC 111801 (type OM1 fiber). This particular cable is Riser Rated (CMR) meaning it complies with UL-1666. It is for usage in vertical tray applications without environmental air. Examples being: cable runs between floors through cable risers or in elevator shafts. These cables self extinguish and prevent the flame from traveling up the cable in a vertical burn test. This fiber optic cable is solidly constructed, UL rated and RoHS Compliant.Part No. 10F2-202NH -
This is a orange bulk 1000 foot spool of fiber optic distribution cable intended for large installations of short range runs at LAN Speeds. It is composed of 6 multimode fibers (62.5 micron core) inside an Aramid yarn wrapped in a orange PVC outer jacket. Multimode fiber is optimized to work with fiber optic equipment using light wave lengths of 850nm (nanometers) or 1300nm. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. The Graded-Step core and cladding of our orange bulk 62.5/125 distribution fiber optic cable is constructed using a high quality multimode fiber that is compliant with TIA/EIA 492AAAA-A, IEC 60793-2-10 and ISO/IEC 111801 (type OM1 fiber). This particular cable is Riser Rated (CMR) meaning it complies with UL-1666. It is for usage in vertical tray applications without environmental air. Examples being: cable runs between floors through cable risers or in elevator shafts. These cables self extinguish and prevent the flame from traveling up the cable in a vertical burn test. This fiber optic cable is solidly constructed, UL rated and RoHS Compliant.Part No. 10F2-206NH -
This is a orange bulk 1000 foot spool of fiber optic distribution cable intended for large installations of short range runs at LAN Speeds. It is composed of 12 multimode fibers (62.5 micron core) inside an Aramid yarn wrapped in a orange PVC outer jacket. Multimode fiber is optimized to work with fiber optic equipment using light wave lengths of 850nm (nanometers) or 1300nm. The cord is duplex (two fibers) which means it permits synchronous communication between devices. The cladding diameter is 125 microns. The Graded-Step core and cladding of our orange bulk 62.5/125 distribution fiber optic cable is constructed using a high quality multimode fiber that is compliant with TIA/EIA 492AAAA-A, IEC 60793-2-10 and ISO/IEC 111801 (type OM1 fiber). This particular cable is Riser Rated (CMR) meaning it complies with UL-1666. It is for usage in vertical tray applications without environmental air. Examples being: cable runs between floors through cable risers or in elevator shafts. These cables self extinguish and prevent the flame from traveling up the cable in a vertical burn test. This fiber optic cable is solidly constructed, UL rated and RoHS Compliant.Part No. 10F2-212NH -
This is an aqua bulk 1000 foot spool of fiber optic distribution cable intended for large installations of short range runs at 10 Gigabit speeds. It is composed of 2 multimode fibers (50 micron core) inside an Aramid yarn wrapped in a aqua PVC outer jacket. Multimode fiber is optimized to work with fiber optic equipment using light wave lengths of 850nm (nanometers) or 1300nm. The cladding diameter is 125 microns. The Graded-Step core and cladding of our aqua bulk 50/125 distribution fiber optic cable is constructed using a high quality multimode fiber that is compliant with TIA/EIA 455-220A and IEC 60793-1-49. It also maintains compliance with legacy and LED based systems per TIA/EIA 455-204 and IEC 607-1-41. This particular cable is Riser Rated (CMR) meaning it complies with UL-1666. It is for usage in vertical tray applications without environmental air. Examples being: cable runs between floors through cable risers or in elevator shafts. These cables self extinguish and prevent the flame from traveling up the cable in a vertical burn test. This fiber optic cable is solidly constructed, UL rated and RoHS Compliant.Part No. 10F2-302NH -
This is an aqua bulk 1000 foot spool of fiber optic distribution cable intended for large installations of short range runs at 10 Gigabit speeds. It is composed of 6 multimode fibers (50 micron core) inside an Aramid yarn wrapped in a aqua PVC outer jacket. Multimode fiber is optimized to work with fiber optic equipment using light wave lengths of 850nm (nanometers) or 1300nm. The cladding diameter is 125 microns. The Graded-Step core and cladding of our aqua bulk 50/125 distribution fiber optic cable is constructed using a high quality multimode fiber that is compliant with TIA/EIA 455-220A and IEC 60793-1-49. It also maintains compliance with legacy and LED based systems per TIA/EIA 455-204 and IEC 607-1-41. This particular cable is Riser Rated (CMR) meaning it complies with UL-1666. It is for usage in vertical tray applications without environmental air. Examples being: cable runs between floors through cable risers or in elevator shafts. These cables self extinguish and prevent the flame from traveling up the cable in a vertical burn test. This fiber optic cable is solidly constructed, UL rated and RoHS Compliant.Part No. 10F2-306NH -
This is an aqua bulk 1000 foot spool of fiber optic distribution cable intended for large installations of short range runs at 10 Gigabit speeds. It is composed of 12 multimode fibers (50 micron core) inside an Aramid yarn wrapped in a aqua PVC outer jacket. Multimode fiber is optimized to work with fiber optic equipment using light wave lengths of 850nm (nanometers) or 1300nm. The cladding diameter is 125 microns. The Graded-Step core and cladding of our aqua bulk 50/125 distribution fiber optic cable is constructed using a high quality multimode fiber that is compliant with TIA/EIA 455-220A and IEC 60793-1-49. It also maintains compliance with legacy and LED based systems per TIA/EIA 455-204 and IEC 607-1-41. This particular cable is Riser Rated (CMR) meaning it complies with UL-1666. It is for usage in vertical tray applications without environmental air. Examples being: cable runs between floors through cable risers or in elevator shafts. These cables self extinguish and prevent the flame from traveling up the cable in a vertical burn test. This fiber optic cable is solidly constructed, UL rated and RoHS Compliant.Part No. 10F2-312NH -
1000ft Aqua 12-Fiber OM4 Fiber Optic Cable 10-GbitPart No. 10F2-412NH -
This is a black bulk 1000 foot spool of indoor/outdoor rated fiber optic distribution cable intended for long distance runs at high speeds. It is composed of 2 singlemode fibers (9 micron core) inside a water blocking Aramid yarn wrapped in a black PVC outer jacket. Single mode fiber is optimized to work with fiber optic equipment using light wave lengths of 1310nm (nanometers) or 1550nm. The cladding diameter is 125 microns. The core and cladding of our black bulk indoor/outdoor fiber optic cable is constructed using a high quality singlemode fiber that is ITU-T G.652.D compliant and backwards compatible with other legacy singlemode fibers. This particular cable is Riser Rated (CMR) meaning it complies with UL-1666. It is for usage in vertical tray applications without environmental air. Examples being: cable runs between floors through cable risers or in elevator shafts. These cables self extinguish and prevent the flame from traveling up the cable in a vertical burn test. This fiber optic cable is solidly constructed, UL rated and RoHS Compliant.Part No. 10F3-002NH -
This is a black bulk 1000 foot spool of indoor/outdoor rated fiber optic distribution cable intended for long distance runs at high speeds. It is composed of 6 singlemode fibers (9 micron core) inside a water blocking Aramid yarn wrapped in a black PVC outer jacket. Single mode fiber is optimized to work with fiber optic equipment using light wave lengths of 1310nm (nanometers) or 1550nm. The cladding diameter is 125 microns. The core and cladding of our black bulk indoor/outdoor fiber optic cable is constructed using a high quality singlemode fiber that is ITU-T G.652.D compliant and backwards compatible with other legacy singlemode fibers. This particular cable is Riser Rated (CMR) meaning it complies with UL-1666. It is for usage in vertical tray applications without environmental air. Examples being: cable runs between floors through cable risers or in elevator shafts. These cables self extinguish and prevent the flame from traveling up the cable in a vertical burn test. This fiber optic cable is solidly constructed, UL rated and RoHS Compliant.Part No. 10F3-006NH -
This is a black bulk 1000 foot spool of indoor/outdoor rated fiber optic distribution cable intended for long distance runs at high speeds. It is composed of 12 singlemode fibers (9 micron core) inside a water blocking Aramid yarn wrapped in a black PVC outer jacket. Single mode fiber is optimized to work with fiber optic equipment using light wave lengths of 1310nm (nanometers) or 1550nm. The cladding diameter is 125 microns. The core and cladding of our black bulk indoor/outdoor fiber optic cable is constructed using a high quality singlemode fiber that is ITU-T G.652.D compliant and backwards compatible with other legacy singlemode fibers. This particular cable is Riser Rated (CMR) meaning it complies with UL-1666. It is for usage in vertical tray applications without environmental air. Examples being: cable runs between floors through cable risers or in elevator shafts. These cables self extinguish and prevent the flame from traveling up the cable in a vertical burn test. This fiber optic cable is solidly constructed, UL rated and RoHS Compliant.Part No. 10F3-012NH -
This is a black bulk 1000 foot spool of indoor/outdoor rated fiber optic distribution cable intended for large installations of short range runs at LAN Speeds. It is composed of 2 multimode fibers (62.5 micron core) inside a water blocking Aramid yarn wrapped in a black PVC outer jacket. Multimode fiber is optimized to work with fiber optic equipment using light wave lengths of 850nm (nanometers) or 1300nm. The cladding diameter is 125 microns. The Graded-Step core and cladding of our black bulk 62.5/125 indoor/outdoor fiber optic cable is constructed using a high quality multimode fiber that is compliant with TIA/EIA 492AAAA-A, IEC 60793-2-10 and ISO/IEC 111801 (type OM1 fiber). This particular cable is Riser Rated (CMR) meaning it complies with UL-1666. It is for usage in vertical tray applications without environmental air. Examples being: cable runs between floors through cable risers or in elevator shafts. These cables self extinguish and prevent the flame from traveling up the cable in a vertical burn test. This fiber optic cable is solidly constructed, UL rated and RoHS Compliant.Part No. 10F3-202NH -
This is a black bulk 1000 foot spool of indoor/outdoor rated fiber optic distribution cable intended for large installations of short range runs at LAN Speeds. It is composed of 6 multimode fibers (62.5 micron core) inside a water blocking Aramid yarn wrapped in a black PVC outer jacket. Multimode fiber is optimized to work with fiber optic equipment using light wave lengths of 850nm (nanometers) or 1300nm. The cladding diameter is 125 microns. The Graded-Step core and cladding of our black bulk 62.5/125 indoor/outdoor fiber optic cable is constructed using a high quality multimode fiber that is compliant with TIA/EIA 492AAAA-A, IEC 60793-2-10 and ISO/IEC 111801 (type OM1 fiber). This particular cable is Riser Rated (CMR) meaning it complies with UL-1666. It is for usage in vertical tray applications without environmental air. Examples being: cable runs between floors through cable risers or in elevator shafts. These cables self extinguish and prevent the flame from traveling up the cable in a vertical burn test. This fiber optic cable is solidly constructed, UL rated and RoHS Compliant.Part No. 10F3-206NH -
This is a black bulk 1000 foot spool of indoor/outdoor rated fiber optic distribution cable intended for large installations of short range runs at LAN Speeds. It is composed of 12 multimode fibers (62.5 micron core) inside a water blocking Aramid yarn wrapped in a black PVC outer jacket. Multimode fiber is optimized to work with fiber optic equipment using light wave lengths of 850nm (nanometers) or 1300nm. The cladding diameter is 125 microns. The Graded-Step core and cladding of our black bulk 62.5/125 indoor/outdoor fiber optic cable is constructed using a high quality multimode fiber that is compliant with TIA/EIA 492AAAA-A, IEC 60793-2-10 and ISO/IEC 111801 (type OM1 fiber). This particular cable is Riser Rated (CMR) meaning it complies with UL-1666. It is for usage in vertical tray applications without environmental air. Examples being: cable runs between floors through cable risers or in elevator shafts. These cables self extinguish and prevent the flame from traveling up the cable in a vertical burn test. This fiber optic cable is solidly constructed, UL rated and RoHS Compliant.Part No. 10F3-212NH -
This is a black bulk 1000 foot spool of indoor/outdoor rated fiber optic distribution cable intended for large installations of short range runs at 10 Gigabit speeds. It is composed of 2 multimode fibers (50 micron core) inside a water blocking Aramid yarn wrapped in a black PVC outer jacket. Multimode fiber is optimized to work with fiber optic equipment using light wave lengths of 850nm (nanometers) or 1300nm. The cladding diameter is 125 microns. The Graded-Step core and cladding of our black bulk 50/125 indoor/outdoor fiber optic cable is constructed using a high quality multimode fiber that is compliant with TIA/EIA 455-220A and IEC 60793-1-49. It also maintains compliance with legacy and LED based systems per TIA/EIA 455-204 and IEC 607-1-41. This particular cable is Riser Rated (CMR) meaning it complies with UL-1666. It is for usage in vertical tray applications without environmental air. Examples being: cable runs between floors through cable risers or in elevator shafts. These cables self extinguish and prevent the flame from traveling up the cable in a vertical burn test. This fiber optic cable is solidly constructed, UL rated and RoHS Compliant.Part No. 10F3-302NH -
This is a black bulk 1000 foot spool of indoor/outdoor rated fiber optic distribution cable intended for large installations of short range runs at 10 Gigabit speeds. It is composed of 6 multimode fibers (50 micron core) inside a water blocking Aramid yarn wrapped in a black PVC outer jacket. Multimode fiber is optimized to work with fiber optic equipment using light wave lengths of 850nm (nanometers) or 1300nm. The cladding diameter is 125 microns. The Graded-Step core and cladding of our black bulk 50/125 indoor/outdoor fiber optic cable is constructed using a high quality multimode fiber that is compliant with TIA/EIA 455-220A and IEC 60793-1-49. It also maintains compliance with legacy and LED based systems per TIA/EIA 455-204 and IEC 607-1-41. This particular cable is Riser Rated (CMR) meaning it complies with UL-1666. It is for usage in vertical tray applications without environmental air. Examples being: cable runs between floors through cable risers or in elevator shafts. These cables self extinguish and prevent the flame from traveling up the cable in a vertical burn test. This fiber optic cable is solidly constructed, UL rated and RoHS Compliant.Part No. 10F3-306NH -
This is a black bulk 1000 foot spool of indoor/outdoor rated fiber optic distribution cable intended for large installations of short range runs at 10 Gigabit speeds. It is composed of 12 multimode fibers (50 micron core) inside a water blocking Aramid yarn wrapped in a black PVC outer jacket. Multimode fiber is optimized to work with fiber optic equipment using light wave lengths of 850nm (nanometers) or 1300nm. The cladding diameter is 125 microns. The Graded-Step core and cladding of our black bulk 50/125 indoor/outdoor fiber optic cable is constructed using a high quality multimode fiber that is compliant with TIA/EIA 455-220A and IEC 60793-1-49. It also maintains compliance with legacy and LED based systems per TIA/EIA 455-204 and IEC 607-1-41. This particular cable is Riser Rated (CMR) meaning it complies with UL-1666. It is for usage in vertical tray applications without environmental air. Examples being: cable runs between floors through cable risers or in elevator shafts. These cables self extinguish and prevent the flame from traveling up the cable in a vertical burn test. This fiber optic cable is solidly constructed, UL rated and RoHS Compliant.Part No. 10F3-312NH -
1000ft 6-Fiber OM4 Fiber Optic Cable 10-Gbit, OutdoorPart No. 10F3-406NH -
1000ft 12-Fiber OM4 Fiber Optic Cable 10-Gbit, OutdoorPart No. 10F3-412NH -
This white 16 AWG (American Wire Gauge) 2 conductor Speaker cable is CM rated for in-wall use, though it need not be used strictly in-wall. It comes in a convenient 50 foot spool and is ideal for wiring the speakers in your home theater or house to your receiver. Each conductor (wire) is composed of 65 0.16 mm strands made from pure copper which provides the optimal conductivity/low resistance to drive high quality audio to your speakers. Our speaker wire is made from pure copper. Some companies use the marketing term oxygen free copper which really means there is no iron oxide in the wire. When oxides of iron are in the copper, the conductivity of the wire reduces due to the higher resistance of the iron oxide. So it is in your best interest to install speaker wire made with pure copper like ours are. Another misnomer is that copper clad aluminum is the same quality as pure copper; this is false. The resistance (Ohms) between the two differ and as resistance in the cable increases the power delivered to the speaker is reduced. The sound will be lower and can lose some of its quality. If copper's conductivity, due to resistance, is rated at 100% then aluminum's conductivity would be rated at 61%. In order to deliver the same quality of sound with aluminum one would need a much larger gauge.Part No. 10G2-29150 -
This white 16 AWG (American Wire Gauge) 2 conductor Speaker cable is CM rated for in-wall use, though it need not be used strictly in-wall. It comes in a convenient 100 foot spool and is ideal for wiring the speakers in your home theater or house to your receiver. Each conductor (wire) is composed of 65 0.16 mm strands made from pure copper which provides the optimal conductivity/low resistance to drive high quality audio to your speakers. Our speaker wire is made from pure copper. Some companies use the marketing term oxygen free copper which really means there is no iron oxide in the wire. When oxides of iron are in the copper, the conductivity of the wire reduces due to the higher resistance of the iron oxide. So it is in your best interest to install speaker wire made with pure copper like ours are. Another misnomer is that copper clad aluminum is the same quality as pure copper; this is false. The resistance (Ohms) between the two differ and as resistance in the cable increases the power delivered to the speaker is reduced. The sound will be lower and can lose some of its quality. If copper's conductivity, due to resistance, is rated at 100% then aluminum's conductivity would be rated at 61%. In order to deliver the same quality of sound with aluminum one would need a much larger gauge.Part No. 10G2-291HD -
This white 16 AWG (American Wire Gauge) 2 conductor Speaker cable is CM rated for in-wall use, though it need not be used strictly in-wall. It comes in a 500 foot pull box and is ideal for wiring the speakers in your home theater or house to your receiver. Each conductor (wire) is composed of 65 0.16 mm strands made from pure copper which provides the optimal conductivity/low resistance to drive high quality audio to your speakers. Our speaker wire is made from pure copper. Some companies use the marketing term oxygen free copper which really means there is no iron oxide in the wire. When oxides of iron are in the copper, the conductivity of the wire reduces due to the higher resistance of the iron oxide. So it is in your best interest to install speaker wire made with pure copper like ours are. Another misnomer is that copper clad aluminum is the same quality as pure copper; this is false. The resistance (Ohms) between the two differ and as resistance in the cable increases the power delivered to the speaker is reduced. The sound will be lower and can lose some of its quality. If copper's conductivity, due to resistance, is rated at 100% then aluminum's conductivity would be rated at 61%. In order to deliver the same quality of sound with aluminum one would need a much larger gauge.Part No. 10G2-291SF -
This white 16 AWG (American Wire Gauge) 4 conductor Speaker cable is CM rated for in-wall use, though it need not be used strictly in-wall. It comes in a 500 foot pull box and is ideal for wiring the speakers in your home theater or house to your receiver. Each conductor (wire) is composed of 65 0.16 mm strands made from pure copper which provides the optimal conductivity/low resistance to drive high quality audio to your speakers. Our speaker wire is made from pure copper. Some companies use the marketing term oxygen free copper which really means there is no iron oxide in the wire. When oxides of iron are in the copper, the conductivity of the wire reduces due to the higher resistance of the iron oxide. So it is in your best interest to install speaker wire made with pure copper like ours are. Another misnomer is that copper clad aluminum is the same quality as pure copper; this is false. The resistance (Ohms) between the two differ and as resistance in the cable increases the power delivered to the speaker is reduced. The sound will be lower and can lose some of its quality. If copper's conductivity, due to resistance, is rated at 100% then aluminum's conductivity would be rated at 61%. In order to deliver the same quality of sound with aluminum one would need a much larger gauge.Part No. 10G2-491SF -
This black 16 AWG (American Wire Gauge) 4 conductor Speaker cable is rated for outdoor use and/or direct burial. It comes in a 500 foot pull box and is ideal for running to exterior speakers in your backyard or outside the office. Each conductor (wire) is composed of 65 0.16mm strands made from pure copper which provides the optimal conductivity/low resistance to drive high quality audio to your speakers. Our speaker wire is made from pure copper. Some companies use the marketing term oxygen free copper which really means there is no iron oxide in the wire. When oxides of iron are in the copper, the conductivity of the wire reduces due to the higher resistance of the iron oxide. So it is in your best interest to install speaker wire made with pure copper like ours are. Another misnomer is that copper clad aluminum is the same quality as pure copper; this is false. The resistance (Ohms) between the two differ and as resistance in the cable increases the power delivered to the speaker is reduced. The sound will be lower and can lose some of its quality. If copper's conductivity, due to resistance, is rated at 100% then aluminum's conductivity would be rated at 61%. In order to deliver the same quality of sound with aluminum one would need a much larger gauge.Part No. 10G2-722SF -
This white 14 AWG (American Wire Gauge) 2 conductor Speaker cable is CM rated for in-wall use, though it need not be used strictly in-wall. It comes in a 500 foot pull box and is ideal for wiring the speakers in your home theater or house to your receiver. Each conductor (wire) is composed of 105 0.16 mm strands made from pure copper which provides the optimal conductivity/low resistance to drive high quality audio to your speakers. Our speaker wire is made from pure copper. Some companies use the marketing term oxygen free copper which really means there is no iron oxide in the wire. When oxides of iron are in the copper, the conductivity of the wire reduces due to the higher resistance of the iron oxide. So it is in your best interest to install speaker wire made with pure copper like ours are. Another misnomer is that copper clad aluminum is the same quality as pure copper; this is false. The resistance (Ohms) between the two differ and as resistance in the cable increases the power delivered to the speaker is reduced. The sound will be lower and can lose some of its quality. If copper's conductivity, due to resistance, is rated at 100% then aluminum's conductivity would be rated at 61%. In order to deliver the same quality of sound with aluminum one would need a much larger gauge.Part No. 10G3-291SF -
This white 14 AWG (American Wire Gauge) 4 conductor Speaker cable is CM rated for in-wall use, though it need not be used strictly in-wall. It comes in a 500 foot pull box and is ideal for wiring the speakers in your home theater or house to your receiver. Each conductor (wire) is composed of 105 0.16 mm strands made from pure copper which provides the optimal conductivity/low resistance to drive high quality audio to your speakers. Our speaker wire is made from pure copper. Some companies use the marketing term oxygen free copper which really means there is no iron oxide in the wire. When oxides of iron are in the copper, the conductivity of the wire reduces due to the higher resistance of the iron oxide. So it is in your best interest to install speaker wire made with pure copper like ours are. Another misnomer is that copper clad aluminum is the same quality as pure copper; this is false. The resistance (Ohms) between the two differ and as resistance in the cable increases the power delivered to the speaker is reduced. The sound will be lower and can lose some of its quality. If copper's conductivity, due to resistance, is rated at 100% then aluminum's conductivity would be rated at 61%. In order to deliver the same quality of sound with aluminum one would need a much larger gauge.Part No. 10G3-491SF -
This black 14 AWG (American Wire Gauge) 2 conductor Speaker cable is rated for outdoor use and/or direct burial. It comes in a 500 foot pull box and is ideal for running to exterior speakers in your backyard or outside the office. Each conductor (wire) is composed of 105 0.16mm strands made from pure copper which provides the optimal conductivity/low resistance to drive high quality audio to your speakers. Our speaker wire is made from pure copper. Some companies use the marketing term oxygen free copper which really means there is no iron oxide in the wire. When oxides of iron are in the copper, the conductivity of the wire reduces due to the higher resistance of the iron oxide. So it is in your best interest to install speaker wire made with pure copper like ours are. Another misnomer is that copper clad aluminum is the same quality as pure copper; this is false. The resistance (Ohms) between the two differ and as resistance in the cable increases the power delivered to the speaker is reduced. The sound will be lower and can lose some of its quality. If copper's conductivity, due to resistance, is rated at 100% then aluminum's conductivity would be rated at 61%. In order to deliver the same quality of sound with aluminum one would need a much larger gauge.Part No. 10G3-712SF -
This black 14 AWG (American Wire Gauge) 4 conductor Speaker cable is rated for outdoor use and/or direct burial. It comes in a 500 foot pull box and is ideal for running to exterior speakers in your backyard or outside the office. Each conductor (wire) is composed of 105 0.16mm strands made from pure copper which provides the optimal conductivity/low resistance to drive high quality audio to your speakers. Our speaker wire is made from pure copper. Some companies use the marketing term oxygen free copper which really means there is no iron oxide in the wire. When oxides of iron are in the copper, the conductivity of the wire reduces due to the higher resistance of the iron oxide. So it is in your best interest to install speaker wire made with pure copper like ours are. Another misnomer is that copper clad aluminum is the same quality as pure copper; this is false. The resistance (Ohms) between the two differ and as resistance in the cable increases the power delivered to the speaker is reduced. The sound will be lower and can lose some of its quality. If copper's conductivity, due to resistance, is rated at 100% then aluminum's conductivity would be rated at 61%. In order to deliver the same quality of sound with aluminum one would need a much larger gauge.Part No. 10G3-722SF -
This 500 foot 12 AWG, 2 conductor copper speaker wire is ideal for wiring the speakers in your home theater or house to your receiver. Featuring pure copper, this speaker cable is sure to deliver all the nuances in your audio media. Cable is dispensed in a convenient pullbox.Part No. 10G4-291SF -
This 6 foot cord features a standard US 3-prong plug on one end and bare wires on the other. This converts back and forth between a 3-prong power plug and a bare end. Perfect for special power applications. Color is black.Part No. 10W1-10106 -
RG58 / U Solid, 95% Braided, 1000 ft. This is a bulk reel of 1000 ft, no connectors. This cable is primarily used for connecting up Ethernet Coax systems.Part No. 10X1-022NH -
This 1000 foot Black BNC RG59/U 75 Ohm coaxial cable comes in easy to use pull boxes. Its primary use is for custom video runs for CCTV, Surveillance and Security video systems. The cable features a 20 AWG solid copper core.Part No. 10X3-022TH-20 -
This BNC cable is primarily used for connecting up video systems that use BNC connectors. This is a bulk spool, containing no connectors.Part No. 10X3-091TH-20 -
Our 1000 foot White Siamese/CCTV cables come in easy to deploy spools and provide excellent audio and video quality in both daylight and darkness. They are incredibly flexible which makes them very easy to install and provide high quality images for recording evidence or to help analyze an event. Our cable offers a 95% braid coverage which maintains adequate shielding against all types of interference throughout the run. They also feature a 20 AWG (American Wire Gauge) solid copper center conductor, which can provide a perfect signal up to 400 feet.Part No. 10X3-18291NH -
Our 500 foot White Siamese/CCTV cables come in easy to use pull boxes and provide excellent audio and video quality in both daylight and darkness. They are incredibly flexible which makes them very easy to install and provide high quality images for recording evidence or to help analyze an event. Our cable offers a 95% braid coverage which maintains adequate shielding against all types of interference throughout the run. They also feature a 20 AWG (American Wire Gauge) solid copper center conductor, which can provide a perfect signal up to 400 feet.Part No. 10X3-18291TF -
This high-quality coaxial cable can be used with your VCR, TV, Cable Box, Satellite Receivers, etc. Great for older devices that don't have RCA or any of the newer audio/video connections.Part No. 10X4-022NH -
This is our high quality F-Pin coaxial cable typically used with VCRs, TVs, cable boxes, satellite receivers, etc. With the 1000 ft spool you'll need to crimp the RG6 connectors onto it with our Crimping Tool, Part # 91D5-05500.Part No. 10X4-022TH -
This high quality coaxial cable can be used with your VCR, TV, Cable Box, Satellite Receivers, etc. Great for older devices that don't have RCA or any of the newer audio/video connections.Part No. 10X4-091NH -
This Black Quad Shielded RG6 Coaxial Cable is designed for use in environments with higher levels of interference. It is ideal for transmitting video signals for Cable TV, Satellite TV, CCTV, Security/Surveillance cameras and more. It features a RG6 Coaxial Cable constructed with an outer aluminum and magnesium braid layer (40% coverage), an aluminum foil layer, an inner braid constructed similarly as the outer but featuring 95% coverage and one more aluminum foil layer.Part No. 10X4-122NH -
Our RG6 cables provide excellent audio and video quality in both daylight and darkness. They are incredibly flexible which makes them very easy to install and provide high quality images.Part No. 10X4-122TH -
This bulk RG6 Siamese coaxial plus power cable consists of 2 cables side by side. The first cable is a standard RG6 coaxial cable with a pure copper center conductor. It is protected from interference by a braided shield with 95% coverage. The second cable is made up of 2 - 18AWG power wires. These are both pure copper, and are insulated separately with red and black jackets. RG6 Siamese cable with 18/2 power is intended for use with surveillance cameras that require BNC video and DC power.Part No. 10X4-18222NH -
Our RG6 cables provide excellent audio and video quality in both daylight and darkness. They are incredibly flexible which makes them very easy to install and provide high quality images.Part No. 10X4-191TH -
Bulk RG6U Coaxial Cable, White, 18 AWG Pure Copper Solid Core, 3 GHz, Pullbox, 1000 footPart No. 10X4-2091TH
